Reviews
ARCHI Radiator side rod
About quality and texture High quality aluminum material finishing. I bought the gold rods version, it look like it doesn't then to fade overtime, but time will tell I guess About the feeling of use Feels heavier the the stock covers but the looks brings out the retro looks at the side of the bike. Difficulty of installation It tools only 30 mins or less. Just have to wonder where is the top or where is the bottom as the there is no instruction given. But it take only a while to figure it out. No issues. Cost performance and comparison with other products The quality is at the top range by Archi. Only product available currently as the other brand with the same design is out of stock. The rest of the other design covers maybe cheaper by the outlook is not there. About shipping and packaging Shipping is not costly. Item is placeed with vinyl bag. I hope there's more protection for the product as the black plates have some scratches at the edge. But after installing it's not visible. Any concerns, cautions, or advice when purchasing The weight of the product is heavier then the stock cover. But only worry is the weight may cause pulling on the radiator bracket. But if it's by Archi I guess it's already consider it and made precaution to it. Initially I thought that my additional radiatior cap will restrict it. But no worries to it. As it fits perfectly as shown on my picture. View detail
Installed on a NC65 2024
Installed on a NC65 2024.
It is not in the compatible models, but there was no problem.
The 2022 and 2024 models are Large sturdy because they are the same Radiator.
View detail
Easy installation OEM peace of mind
Installation was very easy.
Lightweight and thinly made.
I am not sure how good the protection effect is (so I rated it 3), but it is an OEM product and I chose it as a reassurance factor!
View detail
Fits: KAWASAKI Z900, KAWASAKI Ninja1000SX, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Core guard with a good, understated claim!
Easy to install! Very good product in color and design! View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I got a different impression than I expected.
I bought it because when I went to Hokkaido Touring, I found a lot of insects stuck in Radiator.
It's quite expensive and I've been slow to put it on since it's winter and the bugs are gone.
When I put it on, the Core was not as visible as I thought it would be, which is good because it gave a different impression.
Design is a matter of taste and I think I am just fine.
You have to run it in the summer to see if bugs get caught in it.
View detail
Often used in racing vehicles.
Open valve pressure can be increased to 1.6 kg from OEM.
Recommended for harsh environments like Race.
It can reduce the likelihood of Overheat.
When I hear DRC, I think of Off-road Image, but I use it for On road motorcycle.
View detail
Radiator hose
Used for MD47
Purchased while replacing Coolant
Softer and easier to insert than OEM
If you remove the Radiator without sidestepping it.
No problem working on the other side.
Glossy Red may not be to your liking.
View detail
Meter with excellent Cost
I had a hard time deciding between this product and YOSHIMURA's Progress2, but the price difference was the deciding factor. I was not sure about the Progress2, but the price difference was the deciding factor. When I use it as an Oil Temperature Meter, I need an Adapter (sold separately), but when I use it as a water temperature gauge, I can use the Sensor that comes with the product.
In terms of functionality, it would be preferable if the clock and voltage could be displayed at the same time, but other than that, we have no particular complaints.
Visibility is good even during the daytime, considering that it is an LCD meter, and the back light is not colorful, which is good. The button is large and can be operated securely even when wearing winter gloves, so it is considered superior to YOSHIMURA's in this area. After installing, I wiped it with a dry cloth to remove hand stains, and found a small scratch on the body display surface. for Replacement parts are also available at a reasonable price, but if you are concerned about it, it would be better to put a protective film on it while it is still in use.
This time, we procured an Adapter (sold separately) for use as an Oil Temperature Meter. This type of sensor may be damaged by overtorque during installation. I carefully installed the sensor with a little loose Torque control, but no oil leakage was observed.
The body was attached to the Handlebar Brace using Stainless Steel material sold at Home center. (Procurement of U-shaped Bolt and Bent Bracket) I recommend this product because it costs only 5-600 yen to make.
View detail
Recommended for people who ride Motorcycle all year round!
I ride my motorcycle all year round, so I bought this to keep track of my physical condition and to use as a guide for road conditions!
Installation is not difficult, but the position of the Temperature Sensor is a problem.
I think everyone has different information they want to know, but I chose carburetor and Battery and the position closest to me!
The installation was done in a location that would allow airflow and keep the exhaust heat away from the engine and exhaust system as much as possible.
The sensitivity of the Temperature Sensor is good, and it is sensitive to temperature rise during Engine Idol!
View detail
Tie Wrap changes to Large
It was very difficult to get the Tie Wrap at the top through the very narrow area.
The Tie Wrap that came with the product was very stiff and snapped off the pop drill during the difficulty.
I was working with the idea that it would be best to use what came with the product, but it seems that it would be better to start from the beginning with JAPAN Tie Wrap, which is graceful and flexible.
The exterior is indeed Titanium, with a beautiful Blue glow.
View detail
Blue text is hard to read.
[How is it used?
Touring Main.
Was the one you received as per Image?
The shape and size were exactly as shown in the Image.
Was the installation difficult?
When crimping Bullet Type Terminals, the wiring is so thin that it is necessary to strip more strands and bend them three times in order to crimp the terminal firmly.
How was your experience with it?
The opening ceremony is Parenthesis good!
[Included Parts:were they on?
Temperature Sensor, Surface Fastener, In-Hemp palm dock, etc., were all needed for installation.
[Was there anything that disappointed you?
The display surface is glossy and the Blue letters are hard to see because of the reflection; Red letters might be easier to see.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT1200, SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSX400S KATANA, SUZUKI GSX250S KATANA, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GSF1200, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX400
A little bit Large..,
If it were a little more Compact, it would get a perfect score,
Seems a bit Large.
View detail
Fits: HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA NSRmini, HONDA NS-1, HONDA MBX50, HONDA CRM80, HONDA CRM50, HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS50F
Overhaul
I bought this because I wanted to build parts that would improve the performance of the engine overhaul of my NSR50. The assembly is a bit large since there is some press fitting work to be done. I don't have a hydraulic press, so I'm planning to challenge with Vise.
I don't know when I will be able to ride it, but I am looking forward to it.
View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT1200, SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSX400S KATANA, SUZUKI GSX250S KATANA, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GSF1200, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX400
Not bad, but,
The hole for the sensor is a little frustrating somehow. View detail
slight dissatisfaction
I'd like it to be a little more Compact. View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R400, SUZUKI GSX-R250/R, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSR250, SUZUKI GOOSE350, SUZUKI GOOSE250, SUZUKI VOLTY, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SKYWAVE400 burgman, SUZUKI RF900, SUZUKI RF400, SUZUKI RF400
For Progress2 only
I used to have a multi-temp meter by YOSHIMURA, but it was quite old and hard to see.
I have a new Progress2, but the sensor itself is not compatible. However, the sensor itself is not compatible with the new Progress2 sensor.
The LCD of Progress2 is easy to read, and I was satisfied with it.
View detail
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
It is an excellent product that gives a custom feel and protects Oil cooler!
My Custom is Plating or Silver to give a Gold genus feel,
I was looking for it and BEET was offering it, so I bought it immediately.
The black oil cooler is now gorgeous and has a custom look to it. It is two birds with one stone as it also guards against small stones.
I prefer EmblemType, which is smaller in size, for BEET letters, but this is the only product I could find, so I had no choice but to buy it halfway through the process.
I gave it 4 stars because the BEET letters are Large.
I completely prefer it (laughs).
View detail
Fits: HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub]., HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub].
Well, it's usable.
I was worried that the Breather part would break, but Large was sturdy. I am concerned about the appropriateness of the packaging of the product. It is bulging because it was put in forcibly. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Yoshimura logo stands out
Installation is recommended before the Radiator fins are deformed by stepping stones or insects.
The Yoshimura logo has a strong claim, but it's cool because SEA BASS = YOSHIMURA.
Select Silver for color
The Package was also quite elaborate and beautifully packaged in a cosmetic box, I don't think you can reduce in cost there.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but satisfactory
I feel safer with it on and am happy with the way it looks. View detail