Reviews
Unversal is low
[How is it used?
TZr250R that came with the original (3XV) The Fuel Hose of the "Fuel Hose" was a cutchica, so we replaced it with this product.
I had been using NTB products in other sizes, but there was no lineup for 8mm or larger, so I chose this product because it was available in that size.
Was the one you received as per Image?
I received a Hose with BridgestoneLogo printed on it.
How was your experience with it?
To be honest, it was not good enough for my use.
This Level has synthetic fibers and is quite thick, making it difficult to cut.
Therefore, if you try to use it on a Pipe with a diameter above 1Size, it will not fit at all, even if you put a lot of effort into it.
If you only use the Neck for that diameter, there is no problem, but the Neck cannot be used in any other way.
Nevertheless, the pressure resistance performance seems to be great, so it is good for areas under pressure.
[Points to note]
As mentioned above, it is not easy to use.
Also, it only supports water temperatures up to 60 degrees, but on the WaterLine! What about the explanation that,?
How did it compare to other products?
NTB's was flexible and could be used for a slightly higher Size, but it is less universal by comparison.
【Review】
The hose is hard and cannot be reused.
Since it is made by Bridgestone and seems to have high pressure resistance capacity, it would be good for such applications.
View detail
Required for oil catch
About quality and texture It's well made. Once it's fixed, it can't be separated well About the feeling of use be properly set up Products to buy together Corresponding hose Difficulty of installation easy, simple Cost performance and comparison with other products The price of a well-made product is good, too About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I connected it with a gas pipe connector before installation, and engine oil leaked out. But there's no need to worry about this product View detail
For Radiator protection, these are the best
Installed in addition to the Fender extension on the front.
Maybe this will make Radiator Large sturdy...surely.
Mounting is done with the Quantity:Pair (for Left and Right) Simply remove and friend-tighten the Radiator cover of the
The only regret is that it is only available in Silver. since the Radiator was also in Black on a Black car body, I painted it with a Spray can to match the color.
Large sturdy, even if appropriate, for areas that are not well visible.
View detail
I put it in for water temperature in the summer:....
The low temp Thermostat has arrived and will be installed immediately.
I used Type 2 this time, considering the winter season.
The work time is about 30 to 40 minutes even if you take your time.
My vehicle is an MC18, but I think the work time will probably be the same for any model.
I have done a test drive immediately after installation.
The temperature on the day of the run is approximately 30 degrees Celsius (in the city).
I have driven about 100 km on city + mountain roads, and I think the temperature rise has slowed down a bit.
While driving in Nagoya city, stop&go is repeated so that once the water temperature rises, of course, it is almost the same as in NORMAL.
The only thing I would say is that it is a little better because sometimes it is below 65 degrees.
On the mountain roads, as long as the pace was reasonable, I was calm at 60-65 degrees.
As a result, I honestly thought it was fine for me to have it or not.
Maybe the 18 Radiator is so crappy that it's no good! I wonder if the Radiator after 21 will be able to experience the effect?
Probably expensive, but I feel that for 18, Radiator should be changed as well.
View detail
I thought it looked like Parts, but …………
It looks like Parts, but I think it works.
It was removed in the summer because it was no longer cooled by the installation.
It looks Cool.
Carbon is good!
View detail
It is as good as expected.
Fit the Radiator exactly as shown in the photo.
I think it is quite decided.
It would be helpful if it is mentioned in the Instruction Manual.
View detail
Finally purchased, changed from OEM
The selling price is not cheap, so I have been considering purchasing one for a long time and finally bought one. The OEM Product that was installed was old, discolored, and the fins were crushed, so the new one is beautiful.
is DogFiret, but there is nothing DogFiret about what you receive. Everything from the box is KOYO. I thought it would come with a sticker or something since it is an expensive product, but there is nothing. It is a little disappointing, because it is a joint development with KOYORadiator, but there is no "Included Parts:" even though it is not a cheap product. It is also a pity that the box it arrived in was a direct box from KOYO.
The actual item, the back fins were collapsed in a few places, is this what it looks like?
It is unfortunate that the Fixing Screw on the front Fi-Guard is also not Stainless Steel. We have changed to Stainless Steel Buttons for appearance and discoloration prevention.
After that, we can only hope for a performance difference.
View detail
The color is 、、、、
Black color paint was very horny.
Except for the paint job, the texture is now cool as one point a Habit!
View detail
Fits: HONDA BENLY50CD90, KAWASAKI D-TRACKER125, KAWASAKI KSR110, KAWASAKI KLX125, KAWASAKI KLX110, SUZUKI ADDRESSV125, HONDA CBR250R, HONDA DREAM50, HONDA DAX, Others , HONDA MONKEY, HONDA GORILLA, HONDA CRF50F, HONDA MAGNA50, HONDA Ape50, HONDA Ape100, HONDA XR50R, HONDA XR50 Motard, HONDA XR100 Motard
Over cool prevention
It will probably be left open in the summer when I'm writing my impressions, so I'm wondering if we'll see the effect when it gets colder...
For now, we'll just have to wait and see.
View detail
Expensive but unique
Exhaust System, footpeg, and BEET were made by BEET, so we matched them.
I think the performance is not so different from other companies, but the design is one-of-a-kind.
For those who insist!
View detail
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus). The hose from a radiator to a pump can exchange with this product.
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus).
The hose from a radiator to a pump can exchange with this product.
View detail
It has attached to WR250R. Isn't it the dress-up effect up?
It has attached to WR250R.
Isn't it the dress-up effect up?
View detail
It is an ordinary Horse Band.
It is an ordinary Horse Band.
It can be used for various purposes.
Motorcycle fuel, coolant, and various faucet connections for car washes.
View detail
Hard to install and unintelligible V-Cut
We signed a purchase agreement for the vehicle last December, at which time we also placed an order for this Option. The car was delivered on April 17, but the Option arrived in late June.
Installation is unusually difficult, probably due to the radiator shape, regardless of whether it is an OEM or other brand product.
When I installed it, I found a V-shaped cut in the upper center of the Radiator, which is not guarded in any way. Is there any meaning in that V-shaped cut?
I should have bought Other Brand Product, I thought.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
It takes much longer than the delivery time stated on the delivery method.
It was written that it would take 4-6 days to deliver the product at an expensive shipping cost.
It actually took 10 days to arrive.
Shipping takes the worst time.
However, although the product is for the Monkey 125, it fits the 2022 Super Cub 110 well. ------------------------------------------------------------ -------- It was written that it would take 4-6 days for the expensive shipping cost and shipping, but it took about 10 days to arrive.
Delivery takes the worst. Powered by Google Translator
View detail
Required for installation of YOSHIMURA PRO-GRESS
I purchased this product because it is essential for installation of YOSHIMURA PRO-GRESS.
Since the sensor is a conspicuous color, it was installed on the oil pan side to make it inconspicuous.
Luckily, the Blind lid was not so hard.
View detail
cb400sb installation
However, the mounting hardware screws were too small, and since Cowletc. was worked on as it was, I had a hard time installing the screws.
In the end, we compromised and fixed the top with Tie Wrap.
I have toured about 200 km after installation and have had no problems so far without any unusual noises.
I went with Black Plating so it's not as noticeable, but so far I'm happy with it.
View detail
Not bad, but not good, either.
I purchased this for oil temperature control.
The text is large and easy to read, but...
I would like to see the body to be a little smaller and more compact, or the letters on the clock side to be a little larger...
There seems to be a durability problem, but I don't know since I just put it on.
I chose the battery Type, but it is easy to turn it on and off, etc. even with Gloves.
It is still a little inconvenient to have no back light.
View detail
It is an ordinary Oil Temperature Meter.
Before changing the viscosity of the engine oil, the oil temperature should be at least,...
I'll have to measure it ^_^.
The Temperature Sensor is the oil temperature at the drain bolt and oil pan of the engine oil.
When the temperature on the Oil Temperature Meter was 65°C, I drained the oil and measured the drained oil with an Analog stick thermometer and found that the values were almost the same, so I think accuracy is not a problem.
There are no particular problems, except that deciding where to install the meter and taking out the power supply is a hassle.
The problem is that the Sensor fitting Gasket washer (18mm inner diameter), which is sold separately, was not stocked in stores at the supply store.
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
Gasket washers are available at 、、、、、
Gasket washer, with an inner diameter of 18mm, outer diameter of 25mm, and thickness of 2mm
Inventory wiped out at 6 nearby supply stores?
AutoBacks as I recall, there was no Washer itself in the store, so I asked and Pit brought me one with an inner diameter of 18mm, outer diameter of 25mm and thickness of 1.5mm ^_^.
AutoBacks indeed?
When replacing the oil, it might be better to remove only the Temperature Sensor.
View detail