Reviews
I thought setting was necessary.
BITO's Settled fcr,
what kind of state (Exhaust System, ignition system, etc.) I don't know if you did the Setting in the
It is unknown, so if you are particular about it, you will need a Setting that matches your vehicle.
As for the delivery time, it was originally scheduled to take about 3 months, but it arrived in one month.
View detail
Setting completed
Racing carburetor is still fun!
Run several times in the actual run setting.
Jet needle step change is almost ok.
View detail
Necessary for FCR Carburetor Body
Essential items for FCR Carburetor Body, not very durable. View detail
Very suitable for my bike
I owned an SR400 and the carb fit so tightly inside the frame so I cannot adjust the idle screw. Thankfully I've found this product for my carb and even my bike. View detail
It performed exactly as I expected. (*^^*)
Quantity, depending on the individual:Pair (for Left and Right) I think it will be done, but I was able to turn comfortably by adjusting only the Needle clip. View detail
This is required for Power Filtering.
This O-Ring is required when converting a small body FCR Carburetor Bodycarburetor into a Power Filter.
Used between Power filter adapter and Carburetor body.
This is essential to prevent secondary air.
View detail
Fits: HONDA CB750F, HONDA CB750 Four(CB750K)
Due to Normal cab malfunction
Purchased due to Normal cab malfunction
Difficult to adjust from Idling to high rpm 。。。。 Low to medium speeds are especially difficult
View detail
The FCR Carburetor Body you've always wanted!
I had been on the fence about buying it, but I was informed that the price will go up by about 32,000 yen starting April 1.
I made the decision to purchase.
The setting for the car model was already out to some extent, but once the Jet and other products were installed, it was not possible to use them.
Checked the number of screw-related returns and tuned the throttle valve.
Also, I installed a SEPBearingGuide (I'll skip this since it has nothing to do with product impressions).
Installation is easy for those familiar with the OEMcarburetor, as it simply replaces the OEMcarburetor.
After starting the engine and adjusting the idling, the car was ready for a test run.
As expected, FCR Carburetor Body Response like a demon!
Acceleration like a demon...?
The Exhaust System has been replaced with an external one, so it is obviously thin. (Breathing at 6000 rpm)
Quantity of Main jet in the future:Set is purchased and Setting is issued.
Low speeds run without any problems.
After all, it is shipped with the settings for the car model, so it will run to some extent.
From there, I'll boil it down to my own taste.
View detail
Remote Idle Adjuster
I was able to install it without any problems. It could be a little longer. View detail
Fits: KAWASAKI Z2, KAWASAKI Z1, KAWASAKI Z1000MK-II
To prevent oil temperature rise in summer for z1
I had been driving my Z1 without oil cooler and I was looking for a 9inch 10 step cooler for my normal engine. It took a little time from purchase to delivery, and I received it in winter, so I installed it in April, If you have an OEM carburetor with an air cleaner box, we recommend you to install the hose on the SIDE of the carburetor. We changed to CRcarburetor and FunnelSpec. at the same time we installed Oil cooler, so we were able to install without any problem. 。 I drove the car after installation, and the oil temperature was different from before. I think it will be more effective when the temperature gets higher, but the oil temperature will rise if I have to stop in traffic for a longer period of time, so I will drive with caution. I did not know where to thread the hose because the installation manual was not included, but when I inquired with Mr. Vito, he was able to explain it to me in detail. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Recommendation to Touring groups with FCR Carburetor Bodycarburetor!
With an external carburetor, Funnel and Power Filter would be effective to get the best performance.
I was worried that the mixture would become thicker in rainy weather due to humidity, and I thought it would be safer to seal it with a normal filter.
good point
The FCR Carburetor Body can be used with the Normal filter intact.
Adapter's accuracy is solid, so there is no need to worry about secondary air.
No need to worry about running in the rain.
Carburetor setting is not severer than with the Power Filter.
A bad point
The price is high.
Compared to the Power Filter, the ride is mild at best, and insufficient at worst.
Installation is difficult without removing the Seat.
I think the choice is between performance and durability.
After all, the carburetor does not have to be external, and the OEM could have remained the same....
It is hard to feel, but FCR Carburetor Body has better high-rpm extension and Response than OEM.
View detail
JB Power Aluminium Engine Hanger Z900RS
The quality is superb, they fit perfectly and look really good on the bike. The quality of the machining and the anodizing is first rate. Also, the sevice from Webike was excellent View detail
FCR Carburetor Body of your dreams
My first impression of the installation was that the Throttle was very heavy! No amount of Wire routing or type of Wire could improve it.
So we changed the Spring to a lighter one, and it now feels as good as the OEM one. The spring change is not possible without a full reverse operation.
Other than that, the acceleration power is as good as its reputation.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200, KAWASAKI ZRX1200R
Vito car models Exclusive Design
I bought it because of Vito's Exclusive Design, but I thought it would be difficult to set it up, and I thought I would be able to drive it with the engine running, but I just popped it in and drove it. I could feel the power of Torque fully from the bottom to the top.
Nojima's Full Exhaust System & Silencer was a one-off silencer with a good exhaust system, but I was satisfied with the settings, which were better than I had imagined.
The funnel size is only 35mm, so it would have been better if a longer funnel was included as a spare.
I would like to take it to PowerCheck to check the air-fuel ratio and fine-tune it.
If you don't mind, I think you will be fully satisfied even with a pontoon.
View detail
Good quality
The installation itself is very easy. However, it takes a little getting used to the settings. However, the manual comes with the product, so you don't have to worry. View detail
The little one who does everything like the big one.
Changing the original automatic camshaft chain tensioner to the xs model from JB POWER also saves 115 grams. -------------------------------------------------- -------- The change of the original automatic camshaft chain tensioner by the XS model from JB Power is also 115 grams of won. Powered by Google Translator View detail
It's a reImpression I used for 3 years.
I did an impression once right after I bought it, but there were a lot of errors due to lack of knowledge, and the setting had not been published, so here is my impression again after 3 years of use.
The OEMAir Cleaner Box was used for installation, and OEMWire was used for the Throttle Wire.
An adapter for Active's Power Filter is used for connection to the OEMAir Cleaner Box because its diameter is the same as that of the Air cleanerbox.
So, other than the FCR Carburetor Bodycarburetor, as long as you have the Adapter for Active's Power Filter, you can install it on the W400.
At first I used Power FilterSpec. but I was not satisfied with the performance even though I did my best in Setting.
I think the OEMAir Cleaner BoxSpec. is the only choice for W400!
Driving performance is improved from the moment the throttle is opened.
Even in the normal rpm range of around 3000-4000 rpm, the power is clearly different from that of the OEM.
Especially when the Axel is opened, it gives a direct feeling, so just by subtly turning the Axel on and off, you can make your motorcycle more enjoyable.
However, the sense of pulse when idling is reduced, and it becomes a rotating type of engine instead of a thumping type of engine.
The Engine vibration itself increases when turning.
The Shipping Settings were honestly a mess!
The Slow Jet that came with the shipment had a 38 on it, but it was too thin to idling properly.
Jet needle is FTM, but it is also useless, I don't think FT system is right for it.
In the end, Slow Jet settled around 45 and Jet needle around EZQ!
Main jet remains at 125 and Large body can be used except in winter, so you need to prepare Throw and Needle first.
Setting also affects the exhaust system, so this is not the correct answer, but it is best not to rely on the factory settings.
By the way, the Exhaust System is Wyvern classic.
Fuel consumption depends on setting
When riding around town, use the thicker Emphasis on Torque setting to achieve around 21km/h. When touring, use the thinner Emphasis on Torque setting to achieve around 27-30km/h.
You will be able to set it to your liking, so we are not talking about going up or down compared to the OEM.
The condition of the Engine changes every day due to the different temperatures and the different fuel tone.
It is not always 80 because we don't set up every time, some days it is 70, some days 95.
Spring, Fall, Summer, and Winter Setting for a minimum of Season is required
You'll be constantly feeling the Engine's burn, and that's more fun than you might think!
W400 is less difficult to set up because you can replace the jets without removing the carburetor.
If you like tinkering with Motorcycle, you will enjoy it including Setting!
I will recommend it.
View detail
Fits: KAWASAKI Z1300/KZ1300, KAWASAKI Z1300/KZ1300
Excellent springs
Shipping was fast, I'm located in the United States. Packaging was great. Bito Jb power makes the best parts. Another great item. View detail
Fantastic quality. Most impressive carburetor
Another great product from Bito JB power. Best customer service in the industry. Quality was top of the line and they operate flawlessly. Deeply impressed. View detail
FCR Carburetor Body37Black body
The product was originally scheduled to be shipped in February, but was accelerated and the product arrived in November.
It runs with no particular problems after being popped in.
It looks cool and I am very satisfied.
View detail