Reviews
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
appearance
OEMPlate tends to crack, so I bought it for its appearance!
Check the position of the holes when installing.
I think the product is done by punching out the outside, but that process is sweet.
Looks and feels TEXTURED!
After installation, you can only see the sides, so I think we need to take care of that first.
Also, Anodized is not processed well, Red but not dyed well.
I know it's a cheap product, but I'd like to see them do a better job in that area.
I can't tell from a distance.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
I would like to install parts.
ZrX1200DAEG over RACING Sprocket Cover + ZX-14RRRelease + bremboRCSRadial master16Φ I used it for 2 days touring about 800km. The above combination did not cut the bike exactly, the GEAR did not go in well, the Neutral did not go in well, and there were many stops at traffic lights with the Clutch still in the grip. Since it was a bit stressful, we consulted with CharismaMechanic, our favorite shop, the next day. The next day, I consulted with CharismaMechanic at my favorite shop, and they told me that the thickness of this product is 3.0mm and OEM 2.5mm, … I switched back to OEM and the problem was easily solved. The product itself is not bad, but it's not a good product. The product itself is not bad. We hope this will be of some help to you. View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA X-4
I feel lighter.
I do feel lighter.
Clutch play is more than OEM, so lever adjustment may be necessary!
Custom feeling is up.
View detail
Fits: HONDA CB1100EX, HONDA CB1100, HONDA CB1100RS
Honestly, it's subtle…
The quality is fine with Aluminum Cut-out, but the effect is not as good as I had hoped...
I replaced it with Mesh hose, so I can feel the difference in Touch, but I honestly don't know if it is lighter.
The Piston diameter has become LARGER, so it must be 10% lighter! I decided to assume that it was 10% lighter than before.
View detail
Fits: HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1100, HONDA CB1100 EX
Interferes with CoolantHose
[How is it used?
Interferes with CoolantHose.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
I am concerned about interference with CoolantHose.
[Included Parts:were they on?
[Was there anything that disappointed you?
Interferes with CoolantHose
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KTM 1290 SUPER ADVENTURE, KTM 1290 SUPER DUKE R, KTM 1190 RC8R, KTM 1190 Adventure
If it's for dress-up purposes
I purchased this in the hope that Clutch would be lighter, but I do not feel that it became lighter
You might want to think of it as for dress-up
View detail
If it was a One piece structure, it was good
【What made you decide the purchase】
Looking at the article that Clause Wire 's Line becomes a straight line by lengthening Lever by 5 mm and the burden on Wire decreases.
【How was it actually used?】
The wire bent under Thailand's head can now be taken straight.
Improvement, deterioration of Clutch operation is hardly felt.
【Was it difficult to install? (Hard parts case)】
Spanner of M8, M10 and Hexagonal Wrench (For M5, M6 Cap Bolt) Use the.
The installation itself is easy and it will be completed in 5 minutes.
Afterwards you need Grease to paint on Thailand part and medium strength Screw lock agent.
[Is there anything I was disappointed about?]
I was concerned about 2-pieces Structure, but again the play and looseness of this part is a concern.
To the end it is my personal opinion but I think that the price setting is high with respect to the contents of the product.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is described in the Instruction Manual to periodically check loosening, but I want you to clear it with design and structure.
【Have you compared items?】
We compared it with ClutchArm of GOOSE. Ba GOOSE 's was excellent in processing accuracy and finish, it was attractive that it was a one piece structure, but the attachment on the vehicle body is not locked through the Bolt to the concave portion of Shaft as well as OEM, but fixed by Bolt' s tightening Large anxiety that it is (Minus) It was a point..
I also felt that my flashy Logo was printed.
【Please tell me the point of installation and hang (in the case of Hard parts)】
You can work and adjust exactly if you remove Wire on Handlebar side without troubles.
[Others]
It seems that it can be extended up to the maximum Large 7 mm, but WireLine is adjusted to about 5 mm so that it becomes a straight line.
Because the Handlebar side uses the Achosat 's Clutch Assi, I was worried that the Clutch Wire' s Outer was too long to fit well, but there was no feeling that the bellows part of the Rubber was clogged like the attached photo.
View detail
If it was a One piece structure, it was good
【What made you decide the purchase】
Looking at the article that by making Lever 5 longer, Clutch Wire's Line becomes a straight line and the burden on Wire decreases.
【How was it actually used?】
The wire bent under Thailand's head can now be taken straight.
Improvement, deterioration of Clutch operation is hardly felt.
【Was it difficult to install? (Hard parts case)】
M8, M10 Spanner available for installation. The person who removed the installation can work and adjust exactly.
[Is there anything I was disappointed about?]
I was concerned about 2-pieces Structure, but again the play and looseness of this part is a concern.
To the end it is my personal opinion but I think that the price setting is high with respect to the contents of the product.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is described in the Instruction Manual to periodically check loosening, but I want you to clear it with design and structure.
【Have you compared items?】
We compared it with ClutchArm of GOOSE. Bar GOOSE's are excellent in machining accuracy and finish themselves is easy and will be completed in 5 minutes.
In addition to the tool, we need Grease to be applied to Thailand part and medium strength Screw lock agent.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although it was attractive that the Handlebar side Wire and the One piece structure were attractive without troubles, the attachment on the vehicle body was not locked through the Bolt to the concave portion of Shaft as well as the OEM, but it was fixed by tightening the Bolt It was the Minus point of the largest Large.
I also felt that my flashy Logo was printed.
[Others]
It seems that it can be extended up to the maximum Large 7 mm, but WireLine is adjusted to about 5 mm so that it becomes a straight line.
Because the Handlebar side uses the Achosat 's Clutch Assi, I was worried that the Clutch Wire' s Outer was too long to fit well, but there was no feeling that the bellows part of the Rubber was clogged like the attached photo.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11
The delivery was late.
There was inventory on the product page, but in fact it was the delivery date of the order production Level. I let you trade in the past, but there was no such delivery deadline. We have only fidelity of displaying inventory, but I believe that if you are more careful to inventory control of goods, this evaluation.
The product is also firmly built, we are satisfied with the shape. I ordered Blue, but it was slightly different from Image with a brighter color than the photo LIVERALLY 50, but I am satisfied.
Although we have not installed yet, we are wearing a Sub Frame of round Pipe shape of Titanium system, but it seems to interfere with Plate.
Overall, I thought that it was better to have POSH system.
View detail
Clutch release installation
OEM Clutch was too heavy to become tendonitis, so purchase. Installation is possible in about 15 minutes. Let's ask the PRO if you do not have confidence. After installation, the position where Clutch can be cut slightly changes, but the problem level Level. It became easy to cut a little lightly and the operation became easier. View detail
Fits: HONDA monkey, HONDA monkey
He wanted to feel a hydraulic clutch and it purchased. The master used the master of the takegawa. Since the clutch of a takegawa plays and has adjustment although the interval was carried out to trouble with the clutch several times (probably bas
He wanted to feel a hydraulic clutch and it purchased.
The master used the master of the takegawa.
Since the clutch of a takegawa plays and has adjustment although the interval was carried out to trouble with the clutch several times (probably based on heat), the round and round time is carried out occasionally, but it is fundamentally pleasing.
View detail
Fits: SUZUKI BANDIT1200S, SUZUKI BANDIT1200S, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSF1200, SUZUKI INAZUMA1200, SUZUKI GS1200SS, SUZUKI GSX-R1100, SUZUKI GSX-R1100
There was much long-distance touring, and since it was left grip mitigation, it purchased. Although surely it became light, it is not thought at about 10% that it changed a lot as a manufacturer says. I think that surely this will feel them common
There was much long-distance touring, and since it was left grip mitigation, it purchased.
Although surely it became light, it is not thought at about 10% that it changed a lot as a manufacturer says.
I think that surely this will feel them common if it gets used although the comment used about 250 km had less left fatigue than former, and think that the case where a clutch is used abundantly all over a town, and how to be tired with touring also change.
However, since the banjo adapter contacted the convex part of the clutch release hole outer circumference by the side of a sprocket cover when a banjo adapter was used as it was, the pure banjo bolt of a bandit 1200, and, a little cover side needed to be deleted.
Since it being a little expensive in price and the work which shaves a cover were required, it is three stars evaluation.
View detail