Reviews
The parts are different.
I purchased this part for my KYMCO Agility 125, but it was a HondaDIOSeries part.
I chose the right model, but the shape was different.
Webike has the wrong model of car for which it is compatible.
View detail
OEM and Size are different so they don't fit. Defective?
With the right tools in place, installation was a breeze.
However, the dimensions seem to be a little different from the OEM and the Belt does not fit tightly.
Pulley surface has play and wobbles even when fixed
Quantity when riding for a few days to see how it goes.:The reinforced belt I bought in a set was torn to shreds when the drumstick snapped….
I returned it to OEM and it was just past the return period.
It became just Garbage.
View detail
fall (e.g. in status)
Slip. I thought it was an initial slip, but it slides.
And a familiar Motorcycle shop. I'm going to ski DAYTONA. I would recommend OEM because OEMMEMBelt is expensive but you don't have to buy cheap.
View detail
Fits: YAMAHA BirdCity125 , YAMAHA BWS125, YAMAHA CYGNUS125
Not for CYGNUS, the splines are different in diameter and cannot be installed.
Not for CYGNUS, the splines are different in diameter and cannot be installed. View detail
Fits: YAMAHA BWS100(BWS), YAMAHA GRAND AXIS, YAMAHA AEROX100
Oh no!
Overheat immediately after replacement and Engine stops and seizes? It was immediately returned to OEM and runs fine. View detail
![[Replacement] Clutch Shoe](https://img.webike-cdn.net/catalogue/images/83890/T-XMAX-CLY_TS.jpg)
Fits: YAMAHA XMAX250, YAMAHA XMAX300, YAMAHA XMAX300, YAMAHA XMAX300
If you hear a strange noise when starting, watch out.
I installed it on my X max250 that I use for commuting and it has traveled about 700 km.
When I started the car, I heard a strange "goo”" noise, so I lowered the car and found that the Clutch Shoe was covered with wounds in places where it should normally be smooth and smooth.
It was the 38th day after purchase, but 30 days had passed since the product arrived and I could not discuss the problem.
Maybe you happened to run over HaGap, but it still recommends OEM Product.
View detail
Fits: HONDA gyro canopy, HONDA LEAD 50, HONDA LEAD 50, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT, HONDA TACT, HONDA TACT, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Too inaccurate to use!
It is so inaccurate that I can't use it at all because I can't fit it into a Large, and I can't move the Plate! I replaced it with an OEM one and it worked Smoothly. View detail
Installation is available to PRO at ??
The OEM Product has to be removed and the parts used, but it just won't fit. In addition, OEM parts will be blown away by the wind, and in case of loss of parts or failure, the entire ThrottleBody will be assembled and the manufacturer's stock will be gone.
I managed to get it back to OEM, but Mt. Screw was a bit nappy.
View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Failed after only 4000 km.
Purchased as a replacement for VINO (SA26J).
（The V Belt (which had been replaced at the same time as this assembly) was shattered after only 4000 km.
After replacing the V Belt at a Motorcycle shop, the car was shattered again, after only a dozen or so kilometers.
(The motorcycle shop had just changed the belt, but this time they didn't cut corners.) The clutch was also inspected.
Then, an anomaly was found in two Pulleys in ASSYRear.
V Not the surface that Belt hits.
The convex part of the Rear Pulley (SecondarySieveComplete) and the tubular part of the Front Pulley (SecondarySlideIngSieveComplete) that it is penetrating are wobbly and rickety when touched by hand.
This caused uneven rotation and the wavy V Belt seemed to break into pieces.
But to begin with, the two pulleys do not rotate separately, so the part is not even worn.
Cause unknown.
Was either Pulley a manufacturing defect with a shaky core?
Since it is an assembly, we did not disassemble it after purchase and installed it on the Motorcycle as is.
Other parts, the surfaces interfering with the shaft, are not worn.
Clutch plates are not so worn.
View detail
![Racing] Spring Set](https://img.webike-cdn.net/catalogue/images/37255/39254574_TS.jpg)
Fits: SUZUKI SKYWAVE, YAMAHA MAJESTY, YAMAHA MAJESTY
About 2.5mm shorter than OEM and cannot be installed
About 2.5mm shorter than OEMSpring and cannot be installed.
Even with the softest WhiteSpring, there is not enough elongation to pull it to the mounting hole.
Since the purity is not new and the correct free length is unknown, we would like to make a final decision after ordering OEM Product.
I opened the package, so it may not be covered by the conformity coverage, but I'll ask them if it's not a good idea....
View detail
Fits: HONDA TODAY, HONDA TODAY, HONDA DIO 4 Str., HONDA DIO4st CESTA
6 months of use
Self-replacement, riding for 6 months, there was a speed increase of about 10km, but at some point, the initial torque did not rise and the vehicle did not move. I do not know, but I returned the parts to the original condition --------------------------------------- ------------------- Self -replacement, riding for six months, and a 10km speed up, but from one point, the early torque did not rise and the vehicle did not go. The vehicle was checked. I'm not sure, but I put it back with a pure part. Powered by Google Translator View detail
![Gates [Gates] Reinforced Scooter Belt](https://img.webike-cdn.net/catalogue/10045/rk-1111sv_TS.jpg)
Fits: HONDA FORZA Z SPECIAL, HONDA FORZA Z, HONDA FORZA Z
Compatible car models are different.
It is for MF08, though it is listed as MF06.
The product Package clearly states MF08, so Mr. WeBig is wrong.
I could not use it because I bought it for MF06.
View detail
Fits: SUZUKI LETSBasket, SUZUKI LETSG, SUZUKI LETS, SUZUKI LETS5G, SUZUKI LETS5, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI LETS4Basket, SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4G, SUZUKI LETS4, SUZUKI LETS4G, SUZUKI LETS4, SUZUKI LETS4G, SUZUKI LETS4
Defective product.
Item numbers:02-01-7026 through 02-01-7027 are Exclusive HONDA Motorcycle, not Pulley for ADDRESS V50.
To begin with, the height of the Pulley is not suitable for SUZUKI cars, and the center is out of alignment due to poor manufacturing precision, and as a matter of course, the body of the car vibrates strangely every time it turns.
It is not high enough and interferes with Drive face, etc., causing a buzzing noise.
Also, what you will receive will be different in shape from what is shown in the picture.
If you continue to use it, you will get irreparable damage to the Shaft and it will be scrapped.
The Objection to TAKEGAWA was passed once, but the second Objection was not passed when they sent me a similar product.
For SUZUKI cars, this product is sold without Spec. modification and should never be used.
View detail
obs! ask support if it works on mc
it does not work on suzuki address uk 110 2019. they do not want to buy it back. can not recommend buying it. it was an expensive homework for me View detail
The Screw part was too long to use…
In my case, I tried to install the Sensor via Adapter on my CB1100, but the part where the Screw is cut was too long to fit.
Also, Bolt is also Large, so diversion seems to be strictly necessary.
It is very inexpensive for its price range, so it looks Large sturdy if you assume machining or if you can afford the length of the Oil drain Screw.
View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA jog sports, YAMAHA Apprio
I do not recommend it.
The inner diameter of the pulley boss seems to be slightly smaller than the OEM product, so it could not fit in the shaft and could not be installed. View detail
Fits: SUZUKI ADDRESS V50 (4Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS5
Drive beltVery poor
Installed a week ago. It went out the day before yesterday. The situation is that it cut out on RoseRose. I want to contact the manufacturer. I would like to contact the manufacturer. I will return the full amount of the Gold and explain the situation. Why are you selling a bad product? I will send you pictures or return it to you. Please reply as soon as possible. Thank you very much. View detail
Fits: HONDA TODAY, HONDA TODAY, HONDA DIO 4 Str., HONDA DIO4st CESTA
Product is fine.
The product could be used without any defects.
Product Page delivery date is scheduled to ship tomorrow. (In stock at Partner warehouse) However, when I actually placed the order, I found that the expected shipping date was a week later, and I was troubled. If I had to wait a week, I would have bought it from Amazon or Rakuten, even if it costs a little more. Please display a more accurate delivery date!
View detail
Fits: YAMAHA Cygnus X125SR, YAMAHA Bewith125, YAMAHA BWS125, YAMAHA CYGNUS X125SR
You want to do Cancellation, but you're deliberately making it difficult to understand how to do it, aren't you? Huh?
I just want to cancel the cancellation. You son of a bitch. View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Not worth repairing.
A few days after popping it on, a noise occurs?
Rose the Clutch, Clearanceetc.Check….
I could understand the messiness of the Made in Taiwan product. The mounting plate of the three clutches is distorted. Because of the distortion, one of the clutches is not open. The thickness of the sieve is also RoseRose….
It's not Repair.
View detail