Reviews
I'm out.
A little over a year. (Approx. 5000 km) I ran out in and RoseRose. I will not be buying it again. View detail
It was defective
It is not durable and it went bad in a month.Cost performance is great. Cost performance is great, but the part where you put the collar is deformed and the gold collar on the inside is cracked. View detail
Fits: SUZUKI ADDRESSV125S CF4MA L0, SUZUKI ADDRESSV125S CF4EA L0, SUZUKI ADDRESSV125LIMITED CF4EAK9, SUZUKI ADDRESSV125LIMITED CF46AK9, SUZUKI ADDRESSV125G CF4EAK9, SUZUKI ADDRESSV125G CF46AK9, SUZUKI ADDRESSV125 CF4EAK9, SUZUKI ADDRESSV125 CF46AK9, SUZUKI ADDRESSV125LIMITED CF46A K9, SUZUKI ADDRESSV125LIMITED CF46A K7, SUZUKI ADDRESSV125G CF46A K9, SUZUKI ADDRESSV125G CF46A K7, SUZUKI ADDRESSV125 CF46A K9, SUZUKI ADDRESSV125 CF46A K7, SUZUKI ADDRESSV125G CF46A K6, SUZUKI ADDRESSV125G CF46A K5, SUZUKI ADDRESSV125 CF46A K6, SUZUKI ADDRESSV125 CF46A K5
Pulley back cover chipped and cracked
Standard TypePulley
There are deformations and cracks in the hollow part where the Pulley back cover Slide Piece fits.
I have asked for a return policy, but the communication is slow.
View detail
Fits: SUZUKI Address V125S, SUZUKI address V125
Clutch Shoe thickness use limit 2.0mm or less
Clutch Shoe thickness, use limit 2.0mm or less, average 2.0mm, Clutch Shoe thickness is not uniform, too many chips and tensions, unusable, can not function uniformly, return and exchange. In case you are interested in a new Clutch Shoe, the thickness is 3.0mm. View detail
Fits: YAMAHA Cygnus X, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA BWS100 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Axis 90, YAMAHA Axis Street, YAMAHA Jog 90, YAMAHA BWS100 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Axis 90, YAMAHA Axis Street, YAMAHA Jog 90
Don't buy this if you are a CYGNUS X rider!
fine shaft (JOG) Even though it is written "CYGNUS X1", there is CYGNUS X1~4 type in the details of the suitable car model.
It does not fit at all because it is a fine for Shaft.
This could be close to a scam…
View detail
Would not recommend
The delivery and the quality of the product is good. The bad part is that it does NOT improve the performance. The top speed is exactly the same as before. The torque is LESS than before. I have installed it as per the instructions. I would definately NOT recommend this variator. There is a lot of contraversy on the internet about whether the rollers should be lubricated ot not. The instructions said that they should be lubricated and the little tube with the greese is supplied. I did lubricate the rollers as per the instructions and was disappointed witht the performance. I will try to wipe off the greese at some stage as it maybe needs less than what I have put (although I didn't exegurate at all). I will report later but in the mean time I DO NOT recommend this. CHeers. View detail
KOSO to KUSO.
Spec. seems to have been changed (reduction in cost), and the thickness of the Sensor part disappears, and it only feels that the Sensor sticks out too much, blocking the waterway and decreasing the performance.
I want you to return to the original Spec.
This is what it means to lose money on a cheap product.
View detail
Fits: YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 5, YAMAHA Cygnus X Model 5, YAMAHA BWS 125 Type 2, YAMAHA BWS R, YAMAHA BWS X 1 type, YAMAHA BWS125 Type 1, YAMAHA MAJESTY125, YAMAHA BWS125 Type 1, YAMAHA Axis Treat, YAMAHA CYGNUS X Type 1, YAMAHA CYGNUS X Type 2, YAMAHA CYGNUS X Type 2
I'm not happy.
CYGNUS X.
It was hard to get it in. I couldn't get into it very well.
And when I test drove it, it was slower than NORMAL. It's slower than NORMAL. No maximum speed.
Wound was attached to the product from the beginning.
Another external Pulley was a completely different story and faster.
View detail
It's the worst
I purchased this product after checking the product information many times and it is defective. I'm not sure if I can get the belt to hit the case or not. I would like to return it or replace it with a normal Drive pulley. View detail
Parts were defective and could not be installed.
I couldn't get to the Ramp Plate because of the misalignment of the center of the spline hole.
It was obviously adulterated with a manufacturing defect that was distributed to the customer.
I'll contact the company you purchased it from immediately and attach a photo of the situation.
I applied for a replacement for the defective product, but I only received an email from the system's receptionist and no contact from the person in charge.
After 5 days, I finally got a call from the rep, only asking me to send them the car's name, model and VIN.
This product is sold clearly stating that it is compatible with all models.
Why do we need the type of
If you are forced to send the requested information
And then two days later, he asked me to send him a picture that shows the problem.
The answer came back to me. I was so appalled that I couldn't say anything.
It's disgusting.
I've filed a bad application with a proper photo first.
Are you looking at nothing and responding to Objection?
What have you been doing all this time to send me pictures now?
A totally insincere answer.
I'm sending you the pictures first, so you can see them.
When we contacted them, we made a mistake and they hadn't seen the photos.
I'll send it to the manufacturer now and see what they can do.
He said he was sorry.
At this point, it has been ten days.
Finally, 12 days after filing the Objection yesterday, we finally got the
I'm trying to get to the Gold level.
And the comments at the time.
It looks like the Hole Center is out of alignment in the photo.
It's just that the parts are shifted around in the picture.
It's possible that this is not a defective part due to a hole center shift
But just in case you're wondering, I'll return the gold.
Well, what a bad product you're distributing and you don't want to admit it.
Even more supercilious comments without sincerity!
I'm causing a lot of trouble for my customers!
I strongly vowed to never buy things from here again!
View detail
Fits: PGO G MAX 220, PGO EVO G MAX 200, PGO EVO G MAX 150, PGO G MAX 150, PGO EVO G MAX 125
Different models of vehicles are used for different purposes.
This product is for G-MAX125/150 and is not compatible with G-MAX200/220.
Please revise the compatibility table.
View detail
Fits: HONDA dunk, HONDA dunk, HONDA Giorno, HONDA JOG DELUXE, HONDA JOG, HONDA Giorno, HONDA Giorno DELUXE, HONDA TACT, HONDA TACT
Not available
I haven't even put 5,000km on it, but the Slide Piece shattered it
The Ramp Plate scraped and damaged the Pulley
If you're an OEM, I've never heard of it being damaged in such a short distance
I can not use it at all
View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette)
It's cheap, but you shouldn't do it
I just replaced it from the Gates Belt and it snapped after a month, and I didn't think the Belt was the cause, so I went back to it I put this Belt in and it broke again after a month I changed back to the Gates Belt and it didn't break SEA BASS will install a fan cover of warmth improvement from the middle of the road for free, but now The previous OEM belts were no longer thermally tolerant, so they were replaced with a heat-resistant belt at the same time NTB doesn't know that the initial strength of the Belt will be cut off because of the initial strength of the Belt, but it is still the same as the initial strength of the Belt They continued to sell the product The Development Manager discussed this with the Manufacturing Manufacturer, and since they can't even enhance it I said I was going to remove it from the Lineup, and it's still selling after a few months What does that mean? It claims to come with product liability insurance, but they say it won't be insured unless you are injured, and Belt is the reason I admitted that I had to pay for the Wrecker, but I didn't have to pay for the Wrecker, I just got the Gold back View detail
Fits: SYM RV150, SYM RV125, SUZUKI ADDRESSV125, KYMCO GRAND DINK125, KYMCO GRAND DINK150, HONDA LEAD125, HONDA SPACY125, HONDA PCX125, HONDA PCX150
I bought it because it was cheap, but..
It has 16,000 miles on it and is as pictured
Strange noises from the drivetrain, hitting head on at 80km/h, and poor fuel economy, Crank Case tries to find out why When I opened the Cover, the surface was stripped and the Gold genus of Body was considerably shaved Naturally, PulleyWeightGrease is applied at the time of exchange
The OEM has almost 21,000 miles intact, and honestly, I've never seen the Weight roller do this before I did
We replaced it with a DAYTONA, and it's back to normal with no noise and speeds over 80km/h I did
I will never buy again
View detail
Fits: HONDA JOKER90, HONDA JOKER90, HONDA LEAD 90, HONDA LEAD 90, HONDA LEAD 90, HONDA LEAD 90
The size is completely different
I did a search for JOKER Helmet 90 and got a Hit, so you'd think you could use it
Not that you can compare it to the OEMs... by the way
I couldn't use it because it was very small, and I think the seller is also responsible for it
I cried myself to sleep and said it was my fault for buying it without checking
The Large size ones in the image are OEM
View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
Manufacturer dealers not compatible with each other. It is better not to purchase 63430 part number for a while.
After returning for 1 month from purchase and returning returns. As long as the belt 1 pc took too much time? Since the condition of this time seems unlikely and it seems that the reason is still unknown due to the answer from all Manufacturer who is negligibly around, we are in the process of inquiry, It is better not to purchase current stock items. Ha Gap is likely to come. I have not inspected it.
In this case DAYTONA, I realized that quality control got worse again.
It is like an amateur is dealt with by the ambiguous, it is early to sell, the complaint correspondence is delayed contact inquiries and it is urgent and it is urgent to contact here. I felt that the correspondence became considerably worse for the Webb.
View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
P.S.
On the day after I got it here, I happened to get items of the same part number in the neighbor 's PartsSHOP, even on Amazon and measured it. Unfortunately it seems that the width of the thing of 63430 product number which is currently on sale has changed. Because we purchase three in separate places and this result, the current sales lot is OEM normal width 18. There may not be anything close to 5 mm. Things purchased at Amazon and SHOP shops can be returned, but Mr. Webik is likely to change its response depending on the Manufacturer response.
I'm afraid I will get an OEM or another Manufacturer.
View detail
Fits: HONDA Spacey 100, HONDA Spacey 100, HONDA Spacey 100
I hit a defective product for the first time in 20 years.
Although I have been using Belt of DAYTONA for twenty years from the school days up to the present, the size was a stable item with no difference in the size even compared with the OEM Product, but it was the first time for a defective item. Although the length is OK, the width is 0 compared to the normal dimension of the OEM Product. It was 7 mm thin and was in a state where there was no meaning to replace that it was thinner than the used item of the same part number that we used to date. I hope I just pull Hap Gap, but I pray that accuracy and quality control are not the result of being sweet. View detail
It is different from ordering
Despite ordering Weight Roller for 16 grams [The end number 160 of the model number indicates 16 g] The items we received are 11. Marking 5g and Roller. As it turns out, I will make a return request after all, but only the instruction to the request form is postage prepayment. I can not accept it. You might as well be careful when purchasing.
View detail
Fits: HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE, HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE
Disintegrated after one month
I bought it because it's cheap. As i received the prpduxt i thought it could have been a good alternative to tl origibal belt. It did look fine. Nevertheless after just a month the belt exploded...and we're talking about a not tuned 50cc. I don't know if it was just mine or all the belt of this kind are like it View detail