Reviews
Increased power performance at an affordable price!
Upgrade springs at a low price while replacing genuine springs! very good to do I was satisfied with the packaging and finish, and I was able to feel that the power was clearly transmitted better than the original product. The fact that it looks more powerful in yellow is a bonus! This is a list of essential tunings View detail
It is very effective when properly installed in the right vehicle.
ZZ (CA1PB) I installed it in
As shown in other reviews, the Slide Piece will not Slide if assembled as is.
There seem to be many cases where the Slide Piece itself has been shaved hard, but take a closer look at the Ramp Plate. The outside of the U-shaped part where the Slide Piece fits into the Ramp Plate is narrow, and the Slide Piece is crushed in a direction that makes it narrower.
Therefore, shaving the outside of the U-shaped part of the Ramp Plate to the same size as the width of the Slide Piece saves a lot of work and eliminates the need to wear out the Slide Piece, which is already worn out from the start.
It is a good characteristic for a pulley, but it is a characteristic that connects from the bottom to the top at high rpm, so in the case of a 2-cycle engine, it will show its full potential only when a chamber is used. This is the reason why the High Speed Pulley is so good,
When an OEM exhaust system is installed, it is not so different from a general High Speed Pulley, and although the maximum speed is increased, the connection from acceleration to maximum speed is better with an OEM Pulley, so the cost-effectiveness is not so good.
It is good to see the speed increase slowly and steadily without losing the gradient even on a road that seems to climb gently.
By the way, WR6g, Chamber is reARAI's Shotgun modified, carburetor is OEM jetting only and ignition is Daytonablue box.
It is a good Pulley to build through the basic stages of Scooter modification.
View detail
![Sport [Sports] Spring Set](https://img.webike-cdn.net/catalogue/images/37255/39248485_TS.jpg)
Excellent springs for flexible adjustment
About quality and texture
Excellent quality of the springs, each type of stiffness is colored in its own color, white, yellow, green, on the package there is a sticker saying that the product is sold by the Japanese division of Malossi, also included is a Malossi sticker
About the feeling of use
The product is aimed at sports use in the clutch of the same name, 3 types of springs allow you to adjust the transmission as best as possible for the desired power and torque, this allows you to get maximum power, acceleration and speed
Products to buy together
The product is used only with Malossi Fly or Delta clutch and is an additional purchase to a large knot.
Difficulty of installation
Easy installation with a tension spring puller and installer, even the stiffest springs were able to be set just right
Cost performance and comparison with other products
At the time of purchase, the price was much lower than it is now, and the product was in stock in Webike's warehouse, so it was the best choice for the price and speed of delivery
About shipping and packaging
Packed in a blister, damage is impossible, as the springs are made of metal
Any concerns, cautions, or advice when purchasing
There are two types of spring kits to fine-tune the clutch, keep that in mind!
-------------------------------------------------- -------- About Quality and Texture Excellent springs quality, each type of stiffness is painted with color, white, yellow, green, on the package sticker, saying that the product is sold by the Japanese division of Malossi, also in the kit of the Malossi sticker ABOUT THE FEELING OF USE The product is aimed at sports use in the clutch of the same name, 3 types of springs allow you to configure the transmission as suitable as possible to the desired power and torque, this allows you to get maximum power, acceleration and speed Products to Buy Together The product is used only with the clutch of Malossi Fly or Delta and is an additional purchase to a large node Difficulty of Installation Simple installation using a puller and an installer of springs of stretching , even the hardest springs managed to install how to COST Performance and Comparison with Other Products At the time of purchase, the price was much lower than now, as well as the product was available in the Webike warehouse, so it was the best choice for the price and speed of delivery ABOUT SHIPPing and PACKAGING Packed in a blister, damage is impossible, since the ponds are made of metal Any Concerns, Countions, or Advice When Purchacing There are two types of sets of springs for accurate clutch adjustment, keep this in mind! Powered by Google Translator
View detail
Great sports variant
Fits: YAMAHA CYGNUS X FI, PIAGGIO VESPA GTS SUPER 150ie L, SUZUKI BURGMAN
Piaggio Medley 125s
Good product, beautiful, harder than zin but a little shorter than zin of Piaggio Medley, genuine Malossi, fast delivery, carefully packed, quality must take a while to feel clearly! Good product, nice, harder than zin but shorter than zin of Piaggio Medley a bit, genuine Malossi, fast delivery, thorough packaging, quality takes a while to feel new clear! translated by Google Translator View detail
Fits: APRILIA SR 50 FACTORY Injector car, YAMAHA G-AXIS, YAMAHA Bws, YAMAHA AEROX, PIAGGIO ZIP 00 2t, PIAGGIO VESPA S 4T-4V C386M, PIAGGIO NRG MC3 LC, PIAGGIO LX - 4t, PIAGGIO ET4 - 4t, PIAGGIO ET2 00 2t, PEUGEOT SPEEDFIGHT 100, GILERA RUNNER LC, DERBI GP1 REVOLUTION LC, APRILIA SR 50 R
The quintessential Brand product
Branding this isn't like the cheap stuff, but it's very well made, and it's very safe to use, and once you've used it, you'll know it's safe to use, and this is the brand I want to use. View detail
Fits: YAMAHA JOG ZR 3YK, YAMAHA JOG Z 3YK, YAMAHA APRIO A113E, YAMAHA APRIO 2 3YK, APRILIA SR 50 (Minarelli engine), APRILIA SR 50 DITECH (APRILLAEngine) Model:Injector, SUZUKI SEPIA ZZ, APRILIA SR 50(APRILLAEngine), SUZUKI STREETMAGIC, SUZUKI ZZ, YAMAHA AEROX LC , YAMAHA APRIO 3KJ, YAMAHA BINO 3KJ, YAMAHA AXIS 3KJ, YAMAHA BINO 99 A113E, YAMAHA Bws Horizontal KiEngine Model:5DA, YAMAHA Bws Vertical KiEngine Model:2JA, YAMAHA JOG 3KJ, YAMAHA JOG Z-2 Model:A105E, YAMAHA JOG Zr 2000 Model:A119E
Recommended for the most High Speed Oriented people
This product is slightly softer than the OEM Center spring and has a higher speed rating It reduces the reach time
On the other hand, the pickup of re-acceleration etc. is a step below that of the OEM It is recommended for those who understand the difference in characteristics
View detail
A simple spring slider
Like other spring sliders, the Spring of Clutch center spring rate improvement and
It has the effect of preventing the twist of center spring and making the movement of spring smooth It is Not sure about durability, but it's a simple but effective part
View detail
Fits: HONDA SUPER DIO ZX Vertical Engine AF28, HONDA SUPER DIO 92 Vertical Engine AF27, HONDA LIVE DIO ZX Horizontal Installation Kit Engine Model:AF35E, HONDA LIVE DIO Horizontal Mounting Machine Model:AF34E
belt
drive belt for honda zx Belt driven for Honda zx Belt material is high durable, suitable for vehicles that require high speed and durability.(translated by Google Translator) View detail
Fits: APRILIA ATLANTIC LC 4t, APRILIA ATLANTIC LC 4t, APRILIA LEONARDO LC, APRILIA SCARABEO 250ie, APRILIA SCARABEO LC, APRILIA SR MAX 300, APRILIA SR MOTARD 125, GILERA RUNNER FXR - FX, GILERA RUNNER VXR, GILERA DNA, GILERA TYPHOON, HONDA FORZA, HONDA FORZA X, HONDA FORZA X, HONDA FUSION, MALAGUTI madison, PIAGGIO ET4, PIAGGIO LIBERTY, PIAGGIO ZIP, PIAGGIO MP3 YOURBAN 4V 300ie LC
MALOSSI RACING Spring Set
MALOSSI spring se is TOP QUALITY PART. Springs last long and increase the variator power if right spring is installed in the clutch. View detail
Fits: SUZUKI BURGMAN CH41A, SUZUKI SKYWAVE CJ43, KYMCO K-XCT 300 SK60, KYMCO DOWN TOWN 200i SK40, HONDA FUSION CN, HONDA FORZA X MF10, HONDA FORZA X MF08, HONDA FORZA MF06, HONDA FORSIGHT
MALOSSI 18G Weight Roller
MALOSSI 18G weights has good quality. Works perfectly with the MALOSSI multivariator. Just right weight for the FUSION 250CC engine if you value good acceleration without losing the top speed. View detail
Third generation
Malossi Multi-Variator (Pulley Kit) It will be the third generation.
I am exchanging for expendable item at around 3 years.
Apart from Malossi's unique WR flap, it is a satisfactory Large from top to bottom Large.
It is 1 item with confidence in human beings with no problem at all with regard to performance.
Please be careful about WR and boss during use.
By the way, OEM 5FA 2 is recommended for Sense Pu myself.
View detail
My favorite car is different ...
I installed it in Type 3 T - MAX!
Although Pulley has Lineup from various Manufacturers, this item may not be suitable for User setting by himself because Drive Parts is Full set.
It may be a Recommendation for beginners of driving system.
Because it is a full set, I do not mistake it.
I was also considering other Manufacturers, but the T - MAX riding around was changed to another item from this Manufacturer, so I purchased and replaced it.
Because it is the first driving system Parts, it is only a comparison with NORMAL, but my beloved car has changed!
My favorite car barely finished, Meter 's needle jumping phenomenon happened!
Weight Roller comes with 16 Grams and 18 Grams in two types.
Roller is 16 Gram at the present setting, it is 16 Gram, but there is no feeling glittering, the city ride is also normal and SignalStart is fast as well..
But, being accustomed to humans is scary. I want to accelerate more Punch, this time, we are planning to change to 13 Gram Roller.
There is a faster one around T - MAX with the same Pulley, so depending on the setting, I think it will become faster.
We look forward to the future!
View detail
Attaching to GRAND AXIS
We mounted on used car of 20,000 kilometers, NORMALGRAND AXIS.
Although this mid-acceleration was not good for this Motorcycle
Just installing this Pulley will accelerate it all at once in a flash.
Is not this Pulley the best in this car model?
Afterwards I am looking forward to seeing how to exchange CDI and Plug.
The price is a little expensive, but I think that it is worth it..
View detail
It's a good Parts.
We are now entering FORESIGHT.
Acceleration, pickup improved and I was able to ride fun.
Even if it reaches 8,000 rpm, I am amazed to try to go around yet.
View detail
The smoothness of this is different although two kinds of external Torque cams were also used!!! Although it is high, it is different from a raw material and a welding face is also more polite than the other company.since there is no up-and-down Oil
The smoothness of this is different although two kinds of external Torque cams were also used!!!
Although it is high, it is different from a raw material and a welding face is also more polite than the other company.since there is no up-and-down Oil seal, it does not arrange carry out a belt using using purchase or now that it is pure and newly -- if it can do, I will want you to attach and to make a selling point of a Malossi from the beginningIf money has a margin, purchase will be recommended by all means.
View detail
By constructing this Torque driver this time, all drive systems became a Malossi! This Torque driver has a reaction wonderfully better than anything to the Axel at the time of re-acceleration, although acceleration also becomes good! Although it is slight
By constructing this Torque driver this time, all drive systems became a Malossi! This Torque driver has a reaction wonderfully better than anything to the Axel at the time of re-acceleration, although acceleration also becomes good! Although it is slightly expensive, I think that they are the parts which are worth exchanging. View detail
I wanted you to come to read in play [ of various persons ], and it equipped with it. The elongation from middle is the best!
I wanted you to come to read in play [ of various persons ], and it equipped with it.
The elongation from middle is the best!
View detail
Although it is an object for CE13, it is used by CE11. Acceleration became markedly good although the maximum high speed was normal +alpha. I think that it is the best for those who do not want to want to accelerate well and to spend many hours on
Although it is an object for CE13, it is used by CE11.
Acceleration became markedly good although the maximum high speed was normal +alpha.
I think that it is the best for those who do not want to want to accelerate well and to spend many hours on setting since the engine performance can be satisfied also with bolt-on of the engine performance is demonstrated.
View detail