Reviews
Fits: HONDA CB 750 K FOUR , HONDA CB 750 F SUPER SPORT
Listed for 530 Chain, but it was for 630 Chain.
I have accepted the return of a part that was incorrectly labeled by your company as unusable, but I still haven't even received a call from you! View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
This item could not be installed.
I don't know why the manufacturer has a setting. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It was a waste of time.
Purchased and announced that inventory is being checked.
After neglect, the minimum delivery time is one month.
This was my first experience with Net shopping.
If the product is not in stock, we will either stop selling it or contact you immediately.
View detail
XAM XAM Front sprocket C6302-14T
It takes too long for the product to arrive. View detail
Fits: HONDA MONKEY125, HONDA NSF100, HONDA SUPER CUB110, HONDA SUPERCUB C125, HONDA Ape100 Deluxe, HONDA Ape100 Type-D, HONDA Ape50, HONDA Ape50 Type-D, HONDA BENLY 50S, HONDA BENLY 90S, HONDA BENLY CL50, HONDA BENLYCD50, HONDA CRF80F, HONDA CRM50, HONDA CRM80, HONDA CROSS CUB110, HONDA DAX, HONDA DAX HONDA ST70, HONDA DAX ST50, HONDA DAX ST50
It doesn't engage.
The holes in the Sprocket did not mesh with the holes in the fixed Plate. View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Fixing plate defective
Fixing plate could not be installed and we had to use the previous Plate.
If you want to purchase this, you normally recommend KITACO.
View detail
Fits: HONDA XL250, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBF250 04/05, HONDA CB250F, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XL250
XAM (Formerly a fake AF*M) is badly made.
First of all, BALI is terrible.
Webig's product image shows a hole for the meat removal, but in reality, it is not there.
And some modifications are required for PackageLabel. (Lol)
Well, I don't really care because I'm a Manufacturer who buys without any expectations.
It's not that much different from the more shabby $2,000 kiosks in terms of material.
View detail
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
I chose OEMSize and it doesn't fit.
I chose OEMSize out of conformity and could not use it. View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110
Issues with return method
Challenge to raise 1T of CUB standard DriveSprocket
I went through the process of purchasing a Sprocket that I hit in the My Motorcycle registration, but I couldn't find it.
I was so disappointed that I could not do anything during the 2 to 3 days it took to ship the product. I have been using the site for a few years now, and I have been very pleased with the service. I was disappointed that I could not install it because it was a product with a good texture.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled)
I was surprised when I opened it.
I was disappointed because the design of the product was different from the picture, and the lock washer can only be used with OEM Type.
After all, there is no Lock washer, so it is not yet ready to run.
View detail
Fits: HONDA APE, HONDA DAX, HONDA GORILLA, HONDA GROM, HONDA MONKEY125, HONDA MONKEY
Don't buy it (you can't run on public roads with for Race parts) MONKEY125
There is an offset of 4mm, so when the Sprocket swings forward, there are times when the Sprocket Cover is against the Sprocket Cover.
He says that there are some.
Also, I bought it without knowing that it is a Race Exclusive Product and cannot be driven on public roads because there is no picture of the Package in the picture.
I was told I could not return it because it had been opened.
I'm going to cry myself to sleep.
View detail
Fits: YAMAHA TX650, YAMAHA XS650, Others , YAMAHA XS-1, YAMAHA XS650, YAMAHA XS-1
Causes severe oil leakage
After replacement, the oil started to leak heavily. I contacted the manufacturer but no solution. I was told that they would contact me later, but they did not contact me for more than 10 days. I guess they didn't test it by themselves. If you look at other companies' products, you will see that the exclusive Washer is not available in Quantity:It is sold in Set, so I bought that one again and it went away. View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
I bought this with the intention of using it with nsr80 but…
The groove of the fixing plate is too large to rotate, so I could not install it.
I wonder if it can be installed on a MONKEY engine.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Product not delivered
It has been delivered, but the item is not there! View detail
Inventory management at its worst.
If you can't control your inventory or receive it, please don't post it.
This style has always been the same.
Order only because I feel Stressed.
View detail
Fits: APRILIA RX125, APRILIA RXR125, APRILIA Classic 125 80 km|h, APRILIA ETX125 80 km|h
Attention! It won't fit!
I purchased it and tried to install it, but it does not fit the ApriliaRX125 2020MODEL. It is probably a Sprocket for the ApriliaRX125 2STEngineSpec. that was there in the past. It won't work on the current ApriliaRX125 4ST, so be careful!
Perhaps other Sprockets are different?
View detail
There was a lack of research
I ordered based on NORMAL Basic Data, but since it was a used car, Chain It was converted from 428 to 420 As a result, it couldn't be replaced and became a treasure trove of goods View detail
Fits: SUZUKI BANDIT250, SUZUKI DJEBEL250, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250 XC, SUZUKI GOOSE350, SUZUKI GOOSE250, SUZUKI SX200, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RH250, SUZUKI RGV250 (Gamma), SUZUKI LT250R 85-92, SUZUKI LT230E 87-93
X. A. M. Unbelievable answer
From Webike "An answer to Objection returns" I came.
"From XAM, "It will be a suitable Sprocket for the scheduled vehicle data," I have received a reply with and,
Because it is a message that it will not fit the actual vehicle, this time we will accept returns as our response. "
This Manufacturer "I do not have any pride for self-products" Do not you think so?
On all, "It will be a suitable Sprocket for the scheduled vehicle data" What does it mean?
The Data includes "Drive shaft center - Swing arm front end / Installation Space "is not included?
"Compatible" What's "Mounting groove of Drive shaft and fitting groove of Sprocket are merely aligned" By saying that,
"Whether it can actually be installed" Is it not to include up to?
This time Webike "Responsibility as a seller" Although it was decided to take,
As the same business operator "I have no responsibility and pride in my products" X. A. M ( XAM ) I feel indignation.
I wanted to pursue the responsibility of XAM by bringing it to the consumer life center,
We will also involve the seller's Webike so we decided not to devour more things this time.
I advised Webike the following.
"Recently, making the off-road vehicle MOTARD is prevalent.
Originally MOTARD's DRZ-SM and On road's GOOSE, GSX, BANDIT are in compatible models
"To make Front sprocket bigger" Although it may be planning,
Other off-road vehicles DJEBEL, DR, RH, SX
"We are not planning to make Large even if planning to make Front Small" I think.
At least this RM series and RMX series should not be able to install this Front 16 sheets.
This Sprocket says "The whole width is 88? / Drive shaft center to cutting edge 44? "
Increasing this number, "Please make sure that there is this Space in the installed vehicle when you want to make Large larger than the standard Sprocket" I think that it is better to raise a caution statement with.
If I do not, "Returned from not installing" Is not it one after another? "
View detail
Fits: SUZUKI BANDIT250, SUZUKI DJEBEL250, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250 XC, SUZUKI GOOSE350, SUZUKI GOOSE250, SUZUKI SX200, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RH250, SUZUKI RGV250 (Gamma), SUZUKI LT250R 85-92, SUZUKI LT230E 87-93
Can not be attached to compatible models
RMX250S (SJ13 from 92) Before and after 17 in. By the formation, before 15 (standard) / Changed to 43.
Because it is a bit heavy / Consider 16.
Conformity model "RMX250S ? 92 ~ "checking "Front sprocket 16 sheets" Order.
However, the tooth hits the Swing Arm Body and the Sprocket does not turn.
In the first place, because it hits the front end of the Swing Arm, it can not be pushed any further and does not fit in the Drive shaft.
"Groove of Drive shaft and groove of Sprocket are aligned" From "Conform" ?
"It is useless as a front sprocket" The "Nonconformity" I guess..
Absolutely "Expectations and Circlip" Wasted.
Currently requesting Obufacturing returns to Manufacturer via Webike.
View detail