Reviews
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
sounding good
I can't do it myself, so the person who did it for me said that FrontSprocket is very good, in terms of material and lightness, etc. Rear sprocket can be attached with either a pure normal thread screw or a taper bolt, according to the specs. View detail
![Yamaha Scooter 125cc [KAISOKU] Clutch](https://img.webike-cdn.net/catalogue/14762/10170122_507d89ac7d9d9_TS.jpg)
Fits: YAMAHA Cygnus X, YAMAHA MAJESTY125, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS), YAMAHA Majesty 125, YAMAHA Axis Street, YAMAHA BWS125 (Bewith)
finally
I finally got my hands on Clutch, and I'm happy to say that it worked as well as I wanted it to! I'll have to look into buying the next part again! View detail
![[Xess] Clutch Replacement Kit for GS750](https://img.webike-cdn.net/catalogue/images/84768/3-S-T_00055_TS.jpg)
OEM is too expensive.
I was looking for a replacement because the Clutch was getting uncomfortable, and when I looked up OEM, it cost over 50,000 yen.
Clutch cover Gasket is missing...
After much consideration, we decided on this product.
I think things are solid.
View detail
![STD Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Necessary and sufficient performance
The price and performance are sufficient for the need. This is OK for city driving Level. View detail
![VXSeriesChain 530VX3 Silver [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3S&S_togo_TS.jpg)
Fits: HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, HONDA CRF1100L(Africa Twin), HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000F, HONDA CBF1000, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750K6, HONDA CB900 HORNET, HONDA CB900F (BOL D'OR), ROYAL ENFIELD BULLET 500EFI, ROYAL ENFIELD ContinentalGT
Best Balance Choice
If you consider the product as a consumable item without overdoing it, you will end up with the best balance. The Chain Cut & Crimp tool is also a beautiful choice. A bit of a geek's touch, isn't it? The silver color is a nice touch. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Stable SUNSTAR
I was not sure about BlackSteel, but I decided that lightness is justice.
I changed from 43T to 42T, but since it is Rear, I don't think it changes anything experientially.
Next time I will change Front as well and see how it goes.
View detail
Fits: YAMAHA WR250Z, YAMAHA YZ426F, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX300R, KAWASAKI KX125, KAWASAKI KLX250R (for competition), KAWASAKI KLX250R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI D Tracker, HONDA XR200, HONDA TLR260, HONDA CR250
The best chain you can buy
best chain I have used ,I have been riding for a long time and this chain scares me how long it has lasted .Been on my bike for over 80 hrs of mostly track riding and still has not stretchedI check it often to see if its still ok and cant believe it is .I only buy the best quality and have have excellent chains but this one has already lasted 2 times as long and still going View detail
Fits: YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Just Right Rate
The rate of the center spring that comes with the KOSODrive kit is too high, and while it is quickly good for acceleration in town driving, the rate of the center spring is too low.
I wanted to reduce the rate because the normal RPM is too high and the Damage to the Belt is too large and the fuel consumption is too low.
Before the replacement, Belt had about 5,000 km when using the KN project, and other than that (including OEM) However, after the replacement, the Belt has been able to run for 10,000 km without running out. (It looks like it can go 20,000 km in terms of wear and tear)
When accelerating at full throttle KICKDown, the Large body shifted at about 8000 rpm before the replacement, but after the replacement, the Large body shifted at about 7000 rpm.
However, the Sensep is not too soft and the shifting is not too rough, and the acceleration is now very natural and smooth. (Although there is also the effect of SliderBearing combined with Center spring)
If you want to drive a Scooter as a normal foot pedal without any discomfort, this level of Rate is better.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
Fits: HONDA AA04-PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
Cheap but good product
I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation.
The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. -------------------------------------------------- -------- I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation. The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. Powered by Google Translator
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, YAMAHA SEROW250, YAMAHA SEROW225, SUZUKI GSX-R125, HONDA CROSSCUB110
Mounted on CT125
I was concerned about the CHALYCHALY sound of the Normal chain and replaced it immediately after delivery.
NORMAL Is it rubbing off somewhere?" I was so worried,
After the replacement, I can only hear the Exhaust System and I am very satisfied.
I saw that there is some loss because of the seal chain? I also saw a story that there is a loss of some money because of the seal chain,
The momentary delay at the start of the run is gone, and I personally do not feel any power loss.
I just replaced it so I don't know about durability.
View detail
Fits: YAMAHA MAJESTY125, YAMAHA MAJESTYX, YAMAHA CYGNUS X, Others
First DoctorPulley
I have only used Round Type's Weight Roller so far.
Setting is also at a standstill
Buy DoctorPulley to try it out
CYGNUS Taiwan Type 2 is standard 9 Grams, so buy 9 Grams
I had gotten 8.5 Grams before that.
8.5 Gram installed first
Round Type's Weight Roller also uses 8.5 Grams, so I wanted to see how it would change with the same Grams.
The texture is crazy good.
Durability will be verified in the future.
As an imp
8.5Gram with a Fee Ring with a Weight Roller that is lighter than 5Gram.
Turns well.
However
Harder to turn than Round Type at near maximum speed, and headway is made.
Headed at 8000 rpm (descending)
Center spring Spring rate is determined to be too high.
When I switched back to the center spring I was using before, it started to turn and the top speed started to increase nicely.
9000 rpm (down)
Perfect from bottom to medium speed.
Only the high speed range is sensitive.
I just repurchased 8Gram.
There is a conflict with Center spring.
I'd like to try different weights.
It is a little more expensive than Round Type.
I think Mr. WeBig is the cheapest in Total so far!
View detail
Fits: DUCATI Multistrada 1200, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100F, HONDA CB1100R, HONDA CB400S, HONDA CB450, HONDA CB450, HONDA CB500F, HONDA CB500T, HONDA CB650, HONDA CB650, HONDA CB650, HONDA CB750A EARA, HONDA CB750C, HONDA CB750F
Design is good
I replaced this Chain with this Chain along with the Sprocket replacement for SUNSTAR.
However, according to Motorcycle shop, Chain DID better and this Manufacturer is not recommended.
However, I have not had any problems with the installation. Also, the driving experience is not bad.
After about 5 years of use, I will now DID replace it.
View detail
Improved Clutch operation
The OEM clutch lever was replaced because it had become large due to age-related deterioration. The new clutch lever has a more moderate feel. View detail
![ZVM-X SeriesChain 520ZVM-X Black [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/86453/0712_520ZVM-X_BLACK_TS.jpg)
Fits: KAWASAKI KLR650, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, YAMAHA XJR400R, YAMAHA TZR250, YAMAHA MT-25, SUZUKI GS500, SUZUKI DR800S, YAMAHA YZF-R3, YAMAHA DIVERSION400, SUZUKI DR600, SUZUKI DR650 SE, SUZUKI DR750, KTM RC390
Conversion to 520
Conversion from 530 to 520 was done. It is now easier to push and move. View detail
Conversion to 520
I Converted from 530 to 520. It is easier to push and move. 17T,18T should be re-released. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Chain is DID
The OEM chain rusts quickly, so we changed to a plating chain for appearance.
Gold is still beautiful.
Plating on the corners gradually becomes thinner and thinner as it is scrubbed for cleaning.
The color will fade,
If you don't like it, Silver plating is recommended.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Have you become snappier?
[How is it used?
I bought it because I use Enduro as my main and use Clutch a lot for logs and gullies.
Was the one you received as per Image?
It is exactly as shown in the Image. I even feel that it is packed more Compact than I expected.
Was the installation difficult?
Simply replace the existing clutch spring that is holding it in place, and if you work with the motorcycle on its side, you don't even need to pull the oil out. You just need to make sure that the spring is properly seated in the Retainer groove.
How was your experience with it?
Since the last time I rode the Washer, there was a little bit of free time, so I could not say that there was a drastic change! I used only one washer, so I may add another washer to change the characteristics a little more.
[Included Parts:were they on?
The bolt has a countersunk hole to reduce friction and a hexagonal head. The torque is 10Nm, but if you do not have a hexagonal tool, you will have to tighten the bolt by feel.
[Was there anything that disappointed you?
No, it is not. This time the test was at low speeds, so I am looking forward to seeing what happens at high speeds.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail