Reviews
Fits: YAMAHA Cygnus X, YAMAHA MAJESTY125, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS), YAMAHA Majesty 125, YAMAHA Axis Street, YAMAHA BWS125 (Bewith)
finally
I finally got my hands on Clutch, and I'm happy to say that it worked as well as I wanted it to! I'll have to look into buying the next part again! View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
The best clutch
very cool quality ordered on March 29, arrived on April 8, installed them immediately, happy with the result, I will order more View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
Best clutch
The order arrived, the quality of the clutch is excellent, I installed it on my bike, I’m happy with the result. I will recommend it to my friends View detail
Fits: HONDA CLIQ110, HONDA NAVI 110
Thankful product
I appreciate Large change because Aftermarket parts (especially consumables) for Motorcycle that are not FOR JAPAN MODELLineup can be purchased at about half the price of IndiaHondaOEM Product. View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
Fits: YAMAHA , YAMAHA JOGPoche, YAMAHA JOG50, YAMAHA BJ, YAMAHA VINO, YAMAHA APRIO, YAMAHA APRIO, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOG, YAMAHA JOG remote controlZr, YAMAHA JOG remote controlZII, YAMAHA JOG50, YAMAHA JOG remote controlZr, YAMAHA JOG remote controlZr
Clutch outer replacement
APRIO (4jp5) The clutch outer of the "M" was worn and slippery, so I bought it for a replacement.
I had changed only the clutch first, but it started to slip a little when starting off, so I decided it was time to change it.
Inside of Clutch outer (Clutch contact surface) However, the old one was smooth as if it had been mirror-finished, but the new one had the same rough pattern as the surface, so I thought Clutch had a good bite.
I haven't done a test run yet after the replacement, but I don't think it will be a problem since there are no problems with the original running.
Outer clutches are supposed to be replaced when the color of the clutch burns out, so from now on, the clutch and the quantity:I will change it with Set.
View detail
Fits: YAMAHA Aero X100, YAMAHA Grand Axis, YAMAHA RX100, YAMAHA BWS100 (Bewith), MBK NITRO100, YAMAHA Aero X100, YAMAHA Grand Axis, YAMAHA RX100, YAMAHA BWS100 (Bewith), MBK NITRO100
You can feel the change right away after replacement.
The belt needs to be broken in. Once the belt is broken in, you will definitely feel the change in your body. Since it is shorter than the original product, high-speed range can be expected. In addition, with the pulley side tune, both the early and middle ranges were satisfied! View detail
Fits: YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA Jog Z, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter
This is absolutely necessary!!!
Of all the items I purchased while tuning the B.Wiz 100, this is the item that gave me the most satisfaction. I was very satisfied with both the packaging and the finishing performance of the product. Since the settings can be changed without removing the clutch, the work time was significantly reduced, which gave me great satisfaction. View detail
Fits: YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA , YAMAHA JOG-EX, YAMAHA Axis 90, YAMAHA Jog Z, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Grand Axis, YAMAHA BWS100 (Bewith)
Improved performance with reliable lightweight!
It is definitely lighter than the original and has larger ventilation holes, so it is by far superior in heat management and improves response. I am satisfied with the packaging, finish, performance, and price of the product. Since it is a product from a company with a long history of data, I was able to use it with confidence. Thank you. View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Used for SKYWAVEcj43 after all this time.
I started to hear a noise, so I checked the Clutch and found that it was close to the limit … the Belt was still Large and strong. I want to use it as cheaply as possible, so I decided to use this one. The sound is gone and the RPM is a little bit higher, but I'm using it without any problem. There is no change in the large size that I can feel. View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
KN Project SEA BASS type Slide Piece
Purchased a new Slide Piece for replacement, the Ramp Plate itself was also replaced by KN Kikaku's one and it works fine.
Even if only one Slide Piece is missing, it will be impossible to build a drive system, so it is better to leave it in Stock.
Thank God they had it in stock.
View detail
Fits: YAMAHA FORCE 155, YAMAHA SMAX, YAMAHA Majesty S
Don't buy it.
Bought this to replace a worn out clutch. 39mm nut can be replaced even if you can't loosen it with the integrated Driven! And it's cheap! It was a mistake to choose it with such an idea.
When I checked that it was assembled properly and turned the rear tire a little, I heard a strange noise like "PelePera". After turning it a little and reassembling, the noise did not occur, but it sounded depending on the phase of the driven.
And when I actually used it, I was impressed that the clutch connected at about 3000 rpm immediately after assembly and the sharpness of starting was restored, but after only 40 km of driving, an abnormality occurred. However, after only 40 km of driving, the start became sluggish to the same extent as the worn-out condition. (RPM at this time:6000 rpm)
I had no choice but to keep driving the car, and the connection got better again, which is not so clear, but when I drove the car more, I heard a strange noise like a skirring sound at the start. When this happens, no matter how carefully I try to connect the clutch, the clutch slips and the starting becomes incredibly slow. After riding for a while, the sound was gone, but the car started back to the same nippy start as before the replacement. I had not even driven 1000 km so far.
At the end of the day, the car hit the GuardRail foundation during a sudden stop while controlling a slow start and was almost scrapped. Although my driving was the main cause, I cannot deny that this Part was a remote cause.
It should be replaced with OEMClutch with the proper tools.
View detail
Fits: HONDA gyro canopy, HONDA LEAD 50, HONDA LEAD 50, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT, HONDA TACT, HONDA TACT, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Aging
Used on a HondaTACTA-AF09Courreges TACT85.
I was wondering if there were any parts that would fit since the model is quite old, but I wanted to build it with non-OEM parts, so I bought it.
KM Kikaku Parts has been used on CYGNUS and has been doing well, so we purchased the parts from KM Kikaku, which is famous for its mini bikes, because we thought they would be durable.
There was a little BALI, but it was quickly cleaned up and installed.
I don't know how it feels since it has only been installed for about 100 km, but I think it is large and strong since it is a just fit.
View detail
Fits: HONDA GYRO system (TA01), HONDA GYRO system (TA02), HONDA GYRO series (TD01), HONDA jorio, HONDA Giorno, HONDA GIORNO CREA, HONDA ZOOMER, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO General, HONDA TODAY, HONDA Byte, HONDA LEAD 50, HONDA LEAD 50, SYM DD 50
Aging
Used on a 1985 HondaTACTA-AF09.
It is quite old, but the mileage is short, so I thought it would be good, but I was also worried about deterioration since I was going to replace it with Belt replacement etc., so I replaced it together.
A 7mm socket is required for the exchange, but the outer diameter of the socket will need to be a little smaller, so it is necessary to prepare one.
I managed to remove and replace it, but the old Scooter RollerGrease had quite a bit of grease in it, but it was sealed, so it seemed to prevent the grease from flying around.
I think I will be able to drive for a long time again.
View detail
Fits: HONDA CLIQ110, HONDA NAVI 110
buy for Replacement
I purchased this product for Replace for IndiaHondaOEM.
I have been using it for 5 years and I have a Risk that is about to run out, so it's a no-brainer.
Requires sukill for exchange.
View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA SMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTY125, YAMAHA MAJESTYS
Durable.
I purchased this product as a replacement for the drivetrain of my Axis Treat for commuting. I have the same drivetrain in my car now, and it is running well without any problems even after running more than 20,000km since the last replacement, so I think it is a very durable weight roller.
However, there is one BALI location that you should take before you put it in.
View detail
Fits: SUZUKI Address V100, SUZUKI address V125
Probably 2000rpm UP Spring
For ADDRESSV125. Probably 2000rpmClutch meatTimingUP RedSpring.
If you weigh 85kg, at least WR weight is lighter than 16g, and under the condition that an external exhaust system is installed, it will be faster from low speed to high speed. However, the clutch will wear faster than the NORMAL because it meets at higher rpm.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125
Addressv125.
I use it on my 184cc addressv125.
I tried a lot of drivetrain systems, and I ended up with this one for Belt. The length of the rose tree varies from one individual to another, but it's enough for me since I'm not racing.
The Sensep is an OEM nail cutter with no problems at all. The cooling system has been designed to minimize the loss of belt and it will last for 10,000km even if you drive in town or at high speeds. I hope you will continue to sell this product.
View detail
Fits: YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA Jog Z, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter
good product and fast shipping
About quality and texture 10 About the feeling of use 10 Products to buy together Difficulty of installation easy Cost performance and comparison with other products good parts About shipping and packaging good packaging Any concerns, cautions, or advice when purchasing View detail