Reviews
Enough for occasional use
Not suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number one
View detail
But for those who only think about Cut
Seal chain to non-seal (Clip equation) The purchase is only to change the
This Cutter can cut the Chain once, discard the original Chain, and
This is an item for those people
It's cheaper and better if you just want to cut it, but if you want to use it repeatedly
Buy another luxury item
The quality of the Chain Pin extruding rod is poor and the shaft is straight in a blur
Can't press Pin
Probably the bar is only at the lowest level of strength, and if the pin is hard, it will break easily
So, shave the head of the Pin until it is flat before using it
When you say it's worth the price, you can say it's a product that requires a lot of dedication and determination
By the way, the handle is just stuck on the standard screw, so it's not as long as the appropriate length
If you stick a bolt in it and use it as a handle, you can hang a lot of power on it
Most of all, though, Cutter's Stick can't stand up to its power
View detail
Functionality good, Cost good
As described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。
View detail
It is enough to consider frequency of use.
Removed from the Gold mold of the casting and processed as it is.
However, Chain's Piece packing etc etc. How many times a year do you recommend? This item is recommended for those who can use it by all means.
It is better to buy the famous Manufacturer's Cutter.
Bush-born casting → BALI taking surface by yourself Buffing → Self-made finish
It is particularly recommended for people who can enjoy saying like this.
View detail
Necessary and sufficient
I tried several times to Cut of 520 Chain. I used it after scraping one side of Pin at Grinder once, but it will be free without difficulty. I do not understand the long-term durability, but it is not frequently changing such as Chain and this is enough for AmateurUser like me.
The item was washed and packed in PetitPetit in dry condition and delivered. It seems that improvement that it reaches with covered oil is improving.
View detail
If you grasp the available Chain and buy it
If you rotate in Large-sized Wrench, you do not have to cut the head of Chain's Pin in Grinder one by one, you can pull out Pin as it is.
The price is also cheap, so you can work properly enough.
If you are preparing a lot of Motorcycle, some vehicles equipped with Chain that does not fit Cutter will come out, but if you only need your own Motorcycle maintenance, you need the smallest limit.
Let's make it easier to use in Parkari for the time being.
View detail
Cospa strongest
I used it for Chain cut of 530 Size. I needed a bit of power, but I think that I think that it is a price with price. I think that it is more easy to use if the possession is a little longer. View detail
It is easy to use with tools of hardiness.
Compared to N part Cutter, it is coarse casting, but Center Pin's worried center pin shake is perfect without wicking.
It also has its own weight and is easy to work. I think that it can be used for a considerable period since it is a casting.
428 Chain was cut easily without having to scrape Pin head with Thunder.
A good tool is not an appearance but a function and a function.
View detail
Necessary enough for ordinary use
There is no such thing as Chain cuts.
With just cutting it, Crimpetc. Since it does not have the function of LINK Joint, it is to adjust the length of Chain of LINK Joint and to remove the original Chain.
It is a coarse casting that seems to have voids in everything, in a dubious package of Chinese.
Although I was not expecting so much because it is cheap, I think that it will be broken so long as you do not overuse it like PRO, without problems.
It is enough for DIY maintenance.
View detail
I am satisfied.
Although it is the second purchase this time, it is when it is bogoboko to the product explanation, but there is no hindrance to handling at all, it is not a thing to show to a person, but it is rather beautiful paint or something like crane so that Cost will go up It is very good, I thought that the first one would be broken, but I am taking a rest in the tool box without saying that it will be broken, I will be taking a rest in the tool box, less than 1000 yen, this quality, another tool Manufacturer I would like to receive it! View detail
[ it is cheaper than the teeny-weeny Cutter of Nankai, and strong, and easy-to-use ] Don't lose.becoming the 1st place of a Ranking very much -- being certain -- I carry out and think inside -- if it can use for a long time since specification wi
[ it is cheaper than the teeny-weeny Cutter of Nankai, and strong, and easy-to-use ] Don't lose.becoming the 1st place of a Ranking very much -- being certain -- I carry out and think inside -- if it can use for a long time since
specification width is wide, origin will be taken calmly -- ♪
View detail
It can use comparatively [ cheap ] firmly.It is strong although finishing is coarse.This is enough if it seldom uses.A function is achieved firmly.
It can use comparatively [ cheap ] firmly.It is strong although
finishing is coarse.This is enough if it seldom uses.A function is achieved firmly.
View detail
In connection with the 16-cm long Swing arm of a MONKEY, it purchased for Chain adjustment.Although appearance was visible to poor ? just for a moment, if it uses and it sees, it can be cut easily and found useful.Moreover, it is satisfied also with the C
In connection with the 16-cm long Swing arm of a MONKEY, it purchased for Chain adjustment.Although appearance was visible to poor ? just for a moment, if it uses and it sees, it can be cut easily and found useful.Moreover, it is satisfied also with the Cost performance. View detail
They are the first goods when considering a Cost performance. Although not used easily, if a thing is considered throughout life, even if it has, there is no loss. It is easier than the Grinder cuts, and there is nothing very nearly. All toget
They are the first goods when considering a Cost performance.
Although not used easily, if a thing is considered throughout life, even if it has, there is no loss.
It is easier than the
Grinder cuts, and there is nothing very nearly.
All together, it uses about and can do.
View detail
It purchased for exchange of the Normal chain of an APE. Although what it is hard to use being heavy was a Neck, since it was use of the limitation, probably this product with the cheap price was used once.
It purchased for exchange of the Normal chain of an APE.
Although what it is hard to use being heavy was a Neck, since it was use of the limitation, probably this product with the cheap
price was used once.
View detail
A three-point Set was exchanged for Front 15T, rear 33T, and a Chain. The NORMAL was 14T.34T. special tool has been exchanged only by the Chain cutter. Although there was no instruction manual, it has cut easily. It could purchase che
A three-point Set was exchanged for Front 15T, rear 33T, and a Chain.
The
NORMAL was 14T.34T.
special tool has been exchanged only by the Chain cutter.
Although there was no
instruction manual, it has cut easily.
It could purchase cheaply and satisfied, since it will not use from now on.
View detail