Reviews
For ChainSelfMaintenance
I had been doing maintenance of the chain by myself, but I was not satisfied with the results, so I decided to purchase the equipment.
Both parallel and perpendicular can be checked.
Analogous method, but therefore reliable.
I think it is a good item to have, and I recommend it to those who do maintenance of looseness and deflection of a chain by themselves.
View detail
Among the many that are out there.
I chose this product to get Chain Alignment since I changed the Chain of MONKEY125 to Seal chain.
The reason why we chose this type is that there are many types of this type from various manufacturers, but the Screw that fixes the Sprocket to the Material:Plastic, and that was the criterion for our choice.
It is not a good idea to get scratches, no matter how hard it is to see them.
I got a 40cm Aluminum rod separately because the Aluminum rod was too short according to the reviews from other seniors.
I think it is cost-effective if it is mentally satisfying, although I think it can only provide a comforting adjustment.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Sprocket
Sprocket, one of Motorcycle's smallest cogs. View detail
Fits: HONDA CD50, HONDA SUPER CUB 50, HONDA LITTLE CUB50, HONDA CL50, HONDA BENLY50S
Together with Engine Displacement VolumeUp
The cylinder was changed to a 50mm bore, the crank was changed to a 52mm stroke, and the engine displacement volume was increased to 102cc, so even in 4th gear, the engine would blow up in no time and was not busy. However, when the Driven Sprocket was set to 17T and the Driven Sprocket to 30, the car now has a mild acceleration that makes full use of the Torque and allows the driver to easily go with the flow even on main roads. View detail
Compact
Purchased to cut a Chain that was purchased with the wrong number of LINKs.
It is very compact.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Fixing plate defective
Fixing plate could not be installed and we had to use the previous Plate.
If you want to purchase this, you normally recommend KITACO.
View detail
Shiningly！
Used for MONKEY
I bought it as soon as I found it!
One of the best!
View detail
Fits: HONDA MAGNA 50, HONDA CHALY 50, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA CUB90, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA DAX, HONDA SUPER CUB70
Strength is ...
We do not know the exact cause, but the previous OEM product had cracks in the sprocket and ran out of chain, so we decided to go with this product in a hurry.
Strength is unknown but expected.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA CHALY, HONDA DAX, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
To 4MINIOEM compatible
Although we do not ride hard, we installed a seal chain on the CHALY to improve maintenance. There are still some parts to come, such as durability, but there was some initial elongation. The seal chain is wider than the non-seal chain, so be careful when there is no clearance with the rear shock. View detail
Fits: HONDA MAGNA 50, HONDA MAGNA 50, HONDA Nauty Dax, HONDA DAX70, HONDA JAZZ, HONDA DAX, HONDA GIORCUB, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA APE 100, HONDA XL80, HONDA XR80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MONKEY RT, HONDA MONKEY R
CHALYOEM compatible
The OEM rear sprocket was replaced because it had been used with no maintenance and the OEM rear sprocket was in a state where the mountains had been shaved off and the sprocket could be tapped at any time. Since the car is not a high speed vehicle, it was replaced with Minimoto 37 from CHALYOEM 38. Cost performance is great! View detail
OffsetSprocket~!
Changed my 7mm Off-SetSprocket to GCraft16T→MINIMOTO15T! Great for less than half price!
As for driving, the GEAR ratio has been lowered so starting is a little easier!
The other thing to consider is durability, but since the Chain line has been pushed to a certain level, I'm not sure how long it will last.
View detail
To Center out Chain
It is a Spacer that reaches Limit with the OEM Hub bolt.
I purchased this product for my 4jWheel installation.
View detail
Easy to use
I've been curious about Chain Alignment Tool for a while, and I got it from webikPoint!
So, I took some quick measurements, and I put the Sprocket and Chain on top of each other, and sandwich them together with the plastic screw, but you have to make sure that it's tightly fixed to the part of the Sprocket that doesn't have a hole!
The chain line seemed to be correct, but the stick that came with it was too short and I wasn't sure about it. So I went to Home center and bought an aluminum round bar. I cut it to a good length and used it.
I hesitated with the iron bar, but I decided to use Aluminum because I thought I might be crazy with Slant if it was too heavy. The thickness was 4mm.
I'll probably only use it occasionally, but it will prevent Wheel from being uncomfortable sideways to some extent!
I think that I was glad I bought it
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
I bought this with the intention of using it with nsr80 but…
The groove of the fixing plate is too large to rotate, so I could not install it.
I wonder if it can be installed on a MONKEY engine.
View detail
The Ninja 1000 didn't need it.
The Ninja 1000's Chain pull is Eccentric, so it's not that much of a Quantity:Pair (for Left and Right) I thought I wouldn't go crazy with
After using this product, I knew I wasn't crazy.
I'm happy with that.
I changed the Rear Shaft to Chromoly, so it might not be crazy.
The same product has been released by DAYTONA, Straight, Astro, Monotaro, etc.
Monotaro is the cheapest.
All of our products are Made in Taiwan.
The bars could be a little longer.
It's a plastic Bolt, so it won't scratch Sprocket.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Normal good
I think it's good that it has Bolt and Plate, and I think the Bolt is Hexagon Socket to avoid interference with the Shaft. View detail
GarbageWaste Just buy it.
It was written in the previous instalment that it was broken immediately, or that it was crimped while seeing how it worked, but it is not a tool set for Chainfor Replacement in the first place.
As for the quality, it's not something that breaks immediately, so it's good. is cracked.
There's no such thing as a Pin for Crimp, even if you carefully put in a Plate, and it seems to divert a Pin for Cut, but I'm afraid!
The tip of the crimp pin is flat, so if you're not careful, the crimp part of the chain pin will crack and you'll have to start over from scratch.
There seems to be a reason for the low price, and I'd rather pay the same Gold amount to the store to replace it than buy this one, which is more reliable and secure.
You can use it as a Chain Tool, but you should consider that it can't do press-in and Crimp.
View detail
disposable
It is used with the D Tracker 250 and has a chain size of 520.
It broke after one use.
Originally I would have liked to return it because it was defective, but the price was low and I was able to crimp it, so I give up.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
I used it on Grom!
I installed it on my Honda Grom, which is active in commuting and touring in Large. To be honest, I don't know how it feels to have changed it, but I feel better now that it's new. I hope it will last for a long time. View detail
A good, cheap product for Setting
I changed from 16T to 14T due to a setting change
I think the 88cc engine will change the torque, the top speed, and various sprockets for everyone but
If the price is too high, you'll be disappointed when it doesn't perform the way you thought it would after you bought it, and at the same time, you'll be hesitant to make the next change I'm sorry but
This product is very affordable, the quality is good, and I can change the settings easily I have
I've driven about 500km since I installed it and so far I haven't had any problems with it at all I don't know about the durability yet, but I don't have any concerns about the condition of the car from time to time I'm hoping it will last a lifetime
I'd like to choose another one of these products next time
View detail