Reviews
Easy to do!
You can easily connect a Short Fuse to a Normal Fuse without fiddling with the power supply, but a Bullet Terminal is required. The only caution is to check the direction of current flow with a current meter when plugging in the fuse. If you connect the fuse in the opposite direction, it may cause the fuse to break. I bought it at a shop in a hurry, but it was about 100 yen cheaper at Webig's. View detail
Almost good, good product.
I was able to allocate it without any problems! So far so good.
However, the Fuse BOX will not close completely.
The lid is covered and the claws of the Main are still hooked.
View detail
I needed it to install the D-UNIT.
[How is it used?
DAYTONA's Power Supply Extraction Parts "D-UNIT. I bought this product because I need to use it with D-UNIT and Fuse box. I checked it by myself, but it was not written in the Site of D-UNIT.
(I'm a beginner, so I'm honestly not sure if it was really necessary...)
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I was able to install it without any modification.
How was your experience with it?
It's nice to know that no processing is required.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Please check the number of voltage you need before you buy. ←People who bought various products without checking well
View detail
Note the shape of the Fuse BOX
The USB power supply was prepared to be installed under the Rear Sets. Installation was easy and only needed to replace the Fuse, but the wiring from the Fuse did not tighten against the lid of the Fuse box, an elementary mistake due to lack of confirmation.
I stopped taking it out because I was worried about it. It's a good product that's easy to use, so I'll think about converting it to something else.
View detail
Convenient to remove the power supply
The power supply and the attachment power supply can be easily taken out from the Fuse box. Because the terminal is two-way, it is convenient to install the electric parts such as DriveRecorder and ETC at a time, and a stable power supply can be done. View detail
Stable voltage.
The Power Out-put Cord is an easy to use power supply for power amps with subwoofers and is long enough to reach from the battery in the Engine room to the power amp in the Trunk room. View detail
Note the difference in standards
Bought this to get a power supply for my etc installation.
It is possible to use it especially without a problem. However, it is a difficulty that Fuse BOX does not close because the line comes out from the upper part of Fuse.
View detail
Be careful not to overcharge because of its thinness.
Used to remove power from the ELIMINATOR 250.
Because the tight lid is attached to the Fuse box of Eliminator, it is not possible to take out Cable, so it is processed small by Drill.
It's a thin Cable, but I haven't had any problems with it, even if I'm using a Grip heater, etc. But you need to be careful about the allowable current.
It is very convenient and easy to use for mounting electrical components.
View detail
It's easy to get a power supply.
This is very useful.
Just plug it into the Fuse box to get power.
It also comes with a separate Fuse, so if you want to take Attachment power, this is the one I recommend.
View detail
To get the power out
Purchased to remove the USB power supply
All you have to do is replace the Fuse, so it's easy to revert to the original
However, depending on the shape of the shoe box, the lids may be too tight to close, and the cord may be overloaded Please note that this will take some time
View detail
This is a great way to secure the power supply for your electrical parts
I can't live without it anymore!
This is a great way to secure the power supply for your electrical parts
Good point? Power supply is secured by only replacing it with Fuse
Just replace the Fuse with the Fuse that comes with the OEM Fuse box and voila! You can get a Plus power supply in no time Of course, because the function of the Fuse is built into the body, the protection of the circuit that was originally The function is still alive
In addition, a tube fuse is attached to the Plus side of the power supply, so it is possible to use it for the electrical components that were installed afterwards The protection on the Parts side is perfect Excellent
Good point? It has a bullet terminal
There is a plug receptacle on the wiring side that I took out It's already on
If you're a careless person, you'll often see Female on the Plus side and Male on the Minus side Rule called "W", don't you get it wrong?
If you have this from the beginning, the order of Wiring, TAB, receptacle, and so on There's no mistaking Zettai for Thailand I'm glad you're a big girl (me too)
What's not so great about it:... a bit expensive!
Wiring to Fuse. 436 yen
It's up to You whether you take this price as high or low
When I was young "Ouch! I will not buy Thailand What was I thinking, but now that I'm a little older Money buys ease and certainty! I've grown up with the lonely thought process of "I'm going to have to buy these Parts and put them in my toolbox now I'm keeping it in mind that W
View detail
It's convenient
I used it for the first time to power the Grip heater
I don't want to do a bacchanal I could have branched out from Harness on the vehicle, but if I take it from Fuse, I can take Harness from It can be powered off without damage
I wanted to get it from the ACC power supply, so Horn (10A) Fuse of
Make sure it's energized with IgnitionOn and the work is done It's easy
It also comes with a 5A GlassTube Fuse for peace of mind
According to Emon, this power extraction Fuse is different from the standard Fuse that is pulled out They have an orientation (It wasn't mentioned in the Product Package.)
The correct way to do this is to attach the cord or the side with the cord attached to the side with the power coming from the vehicle
I don't know why I'm an electric onchi
It is very convenient, but if you can get the code that comes out of the Fuse to come out horizontally if you can I wish I could have installed it without interfering with the Fuse lid
For those who don't want to chop up OEM Harness, it's Recommendation
View detail
Mini Flat Type Fuse Power
Basically it's easy to install because it just plugs in.
In case of HORNET's Fuse box, you can install but the lid did not stop.
It forced me to close but it made me feel uneasy.
I was able to easily replace the glass tube of Fuse by just opening it.
View detail
Usb Power supply installation
I bought it to install usb power supply this time.
It's very easy to install, just replace it with Fuse from Motorcycle.
I think that it is easy to use and a good product though it was myself that I had never touched electrical components etc..
View detail
It used for extraction of a power source. It can use ordinarily noisily. I am glad if cheap to a slight degree.
It used for extraction of a power source.
It can use ordinarily noisily.
I am glad if cheap to a slight degree.
View detail
It was used for power-source extraction of a Navigation. A few was deleted and after attachment corresponded, although the lid of a Fuse box becomes difficult to be closed a little. Since the vehicle was also using the same goods, the thing whic
It was used for power-source extraction of a Navigation.
A few was deleted and after
attachment corresponded, although the lid of a Fuse box becomes difficult to be closed a little.
Since the
vehicle was also using the same goods, the thing which it had as a reserve was able to be used.
View detail
Even if a Fuse power source does not not much have the knowledge of convenient electrical and electric equipment, since it interferes in the lid of the Fuse box which can take a power source easily, a code is crushed. [ which I want to a
Even if a Fuse power source does not not much have the knowledge of convenient
electrical and electric equipment, since it interferes in the lid of the
Fuse box which can take a power source easily, a code is crushed. [ which I want to attach horizontally direction of wiring individually attached to the Fuse 90 degrees ]
View detail
Power-source picking of navigation and a winter season are found useful in power-source picking of a grip heater. Since taking the electrical and electric equipment from wiring of a car body since it is not detailed into electrical and electric equipm
Power-source picking of navigation and a winter season are found useful in power-source picking of a grip heater.
Since taking the electrical and electric equipment from wiring of a car body since it is not detailed into electrical and electric equipment has uneasiness, the product concerned which may be taken from where and which can be easily taken from a fuse since it does not understand a thing is convenient.
View detail
It used for power-source extraction of the triumph tiger 1050. Brand name :amon emon Mini flat-package-type fuse power-source product number: The cigar socket was attached for E511 navigation or the current supply to a voltmeter. At that time, sin
It used for power-source extraction of the triumph tiger 1050.
Brand name :amon emon Mini flat-package-type fuse power-source product number: The cigar socket was attached for E511 navigation or the current supply to a voltmeter.
At that time, since the battery was anxious in battery direct coupling, their eyes were fixed on this product that can be taken from an ACC fuse so that a power source could be taken by the key ON.
The fuse of 5A is also attached, and since a price is also comparatively comparatively cheap, cost performance is also so so.
The worried [ a little ] point is wiring which has come out of the fuse.
Since wiring had come out from the top of a fuse, in the short fuse box, it was crushed just for a moment and troubled by management.
Since it is natural, putting in in a fuse box wants the device of taking out wiring from width.
View detail
MF-08 It is used for a forza. He bought it in order to take a power source from a battery, although an electric spectaculars is carried out. Since damage is not done to other portions when it short-circuits, since a DC power supply can be taken fr
MF-08 It is used for a forza.
He bought it in order to take a power source from a battery, although an electric spectaculars is carried out.
Since damage is not done to other portions when it short-circuits, since a DC power supply can be taken from a fuse box and the fuse of 5A is also attached again, it is safe.
The recommend of using it by a relay and a set is carried out to those who consider the electric spectaculars.
View detail