Reviews
Cable is hardened
Cable is thicker in terms of current capacity.
Attachment power supply cable is protected by a Shrinkable Tube together, and I wanted it to be separated anyway.
The body is surprisingly large because it contains fuse, so it is difficult to place it in the right place.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Ideal for Attachment power supply extraction
Ideal for taking out Attachment power supply
DL1000 V-STROM250SX is designed to be easily inserted into a connector of the same shape by removing the cover under the tandem seat to reveal the connectors.
I think this is a good product because power can be removed without damaging the Wiring.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Kitako Power Extraction Series!
Is it for SEA BASS/Yamaha?
I purchased this for my VSTROM250SX.
If you look for a lump at the bottom of the Rear Sets, you will find a Connector, which you simply remove and insert this Adapter between the Rear Sets.
It is very easy Exclusive Design!
View detail
Be prepared for anything!
I wanted a USB power supply for my old car, so I chose this compact, all-in-one power management product!
There are three power outlets, so one is used for USB power supply, and the other two are for provisioning!
View detail
No need to provide a phone and connection Cable
It allows you to connect directly to your phone when supplying power to your phone. I find it very convenient not to have to have a separate short USB Cable, and I think it looks much nicer than having a USB Socket attached to the Handlebar. I feel the price is a bit high, but I use it very conveniently. View detail
It is usually convenient.
I think it is a standard product, but it is very useful. If I had a wish, I think it would be more convenient if the cable could be directly inserted without using the Bullet Type Terminal, since the cable is never separated at the Bullet Terminal anyway. Also, I think it would be easier to install if it were 1mm thinner and smaller. View detail
Convenient to consolidate Wiring
It is good that multiple electrical items can be wired together either with the key or directly to the battery terminal, so that the number of wires connected to the battery terminal can be reduced and the battery can be refreshed.
It is not only cheaper than making a similar circuit with Relay, but also reduces the number of wires. If you make multiple circuits by yourself, you need to connect as many batteries and relays as the number of batteries and relays, and the area around the terminals of batteries becomes messy, but you can prevent this and make them reflective. 。
The only unknown is durability, so we'll get to that later.
If the durability seems to be OK, I would like to replace the Relay backs with these on my other motorcycles.
View detail
I think it is necessary
The quality is quite good It's good to organize the wiring well for the feeling of use Product to buy together KIJIMA Plug Pin Set [304-7126] It's easy to install Cost performance and comparable price to other products WeBike packaging is always great, arriving in a week for delivery and packaging Advice is that Monkey 125 has a small headlight space, so you can't put much wiring in it However, you have to consider it because it comes to the battery and connects the lines View detail
Good Connector!
This is the best way to get power out of the device, and it is useful in tight spaces. It is also useful in tight spaces and saves you the trouble of attaching Bullet Type Terminals, which are often tied together when wiring is long. View detail
It is for people who are not good at electricity!
I would like to add an electrothermal Grip heater!
I want to add an additional Tachometer!
Oh, and a USB power supply would be handy too!
But I'm not very good with electricity, so this is my first step.
Since we do not want to have multiple branches in the Attachment power supply, we only need to take out one unit, and once this unit is installed, we will have a total of four stable outlets.
I was able to install it if I took my time in a niggardly way.
I think it will take some experience to put together the additional electrical components related refreshment, but I think it will be manageable if it is the first step for amateurs to tinker with the electrical components.
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
Installed on XSR155.
Used for XSR155.
AttachmentI purchased this product to secure the power supply.
I learned about the availability of Harness here on YouTube.
Coupler will need to be replaced, so it needs to be looked into and worked on.
As a side note, I later learned that XSR155 has an existing Attachment power supply that is OEM and unused. LOL!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Convenient for Attachment power supply extraction
I purchased this product because I wanted to get Attachment power with ease and without modification. The installation was easy and the power supply worked exactly as I expected.
However, the size of the Bullet Type Terminal is not shown in the product information. Bullet Type Terminal uses CA/CB 103(Honda) Plug receptacle." As stated above, the Bullet Type Terminal is slightly different from the Bullet Type Terminal available at Home center. Well, the difference is so subtle that devices can be connected by transforming the female side with pliers, etc., but we would like the size to be UniversalSize here.
The one I bought is Yamaha/for SUZUKI, so even if they say it is for Honda ... . I am not sure if it is for Honda or not.
View detail
SMART power supply with no hassle
[How is it used?
I bought a new motorcycle, Z900RS of 2024 model, and I thought I would use DAYTONA's Attachment Power Supply Unit D-UNITPlus because I use some attachments such as USB power supply and electric heating equipment for Touring Main use. I bought this product to easily get the Attachment power supply.
Was the one you received as per Image?
I saw the elaborate Connector and thought that if the OEM Attachment power supply could be obtained with a normal Bullet Type Terminal, there would be no need for this product (laugh).
I think the Z900 had a regular Bullet Type Terminal near the Meter... (Sorry if I'm remembering it wrong)
How was your experience with it?
The Attachment Power Connector on the vehicle side inside the left side cover is wrapped around with a black tape, and it can only be used if the tape is turned off and the Connector is set to "Free. I felt it was very convenient.
[Points to note]
Not particularly
How did it compare to other products?
No comparison was made because we could not find anything else that could be used for the 24-year MODEL.
View detail
Plus minus needs to be replaced in reverse for GSX1300R HAYABUSA
Precision Driver is required to shift the rubber packing→push down the gold part→replace the Plus minus→and restore the current state. View detail
If only it were a little longer.
Used on New Model PCX125 JK05.
I installed it while replacing the Large Screen.
I have Wiring up to the Handlebar Post, but the length is A little too short and it is difficult to use.
Installation is easy, and by removing the Screen and the black cover below it, you can access the OEM USB port on the reverse side.
Just interrupt the Coupler there.
There is no need to modify the wiring on the car body side.
View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
Used in S1000RR 2023.
We came across this product because we were told that if we took out the power supply poorly, an error would occur in the CAN BUSSystem.
It was easy to install as it simply slots into the USB power supply located under the Tandem seat.
Cowl removal is also easy.
Although the price is high, it is a good product because it can take out the power supply without the need for any modification.
View detail
WR250X requires processing
2016 WR250X, but the Coupler shape and lines are Quantitative.:I bought 2pcs, same Yamaha, thinking this would work.
As a result, the Coupler shape is the same, but the placement of the lines is different, so it could not be ponned.
I was able to use it by changing the placement of the Power Outlet Port Harness line and the License Plate Light line.
The Power Outlet Port Harness line was luckily spotted at Pliers and replaced.
License Plate Light is a DaytonaBlinker Connector 040 that was left over from a Fender Eliminator conversion that didn't pull out cleanly. (3-poles) Rebuilt with item number 96197.
Processing was not difficult, but I would have given up if I had not been lucky enough to pull it off.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Used for NMAX155
I purchased this for my NMAX155 with USB and Wiring from Attachment power supply.
There were no particular difficulties during the actual installation, and the USB was successfully attached and used.
Just by purchasing this, you can easily install electrical components, so there is no loss in purchasing it considering the time and effort required for modification.
View detail
Installation location is not chosen!
Compact and good. Wiring is also easier than expected.
We originally planned to fit it in the space under the Seat, but since it is Waterproof Specification, it can be a candidate in the Front cowl.
It will come in handy in the future as a power source for the Drareco and Fog Lamp.
View detail
CROSS CUB power supply extraction
I installed KIJIMA's Grip heater on my CROSS CUB last year, and when I was using Season now, I thought the heater was not working well and changed the battery, but it was not working. It was very easy to take out the power supply. View detail