Reviews
Daytona usb 18w.Good
Type C usb.Bult qulity good.water proof.cable lenth inought for from head cowul to handle bar mount.good thing is out put port dust seal is replacibale.Main power supply cable along with mini barral fuse.Out pout usb c port is very tiny and simple mount with cable tie Unfotunatly my unit dosent work some time in idel rpm,I'm suspecting volatge detecting(even viltage above 12,4v )Any way im satisfied. Charging is good can be charge phone battery quickly. View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
Fits: Others
Orthodox USB port
[How is it used?
no problem
Was the one you received as per Image?
Wiring is also discreet and Refreshingly cohesive.
How was your experience with it?
I was able to charge my phone with no problem.
[Points to note]
I doubt that it will be Waterproof on rainy days.
Other items that would be helpful
Installation Point or hang
:Rare/old cars should be installed by a store you can trust.
View detail
It does not require processing. The lid is a bit ….
The USB power supply can be removed very easily if you don't feel the need to remove the front parts, which are the face of the motorcycle. If you don't feel that removing the front parts and drilling holes in the body is too much work, you can take out the USB power supply very easily.
It is not difficult if you have a set of tools used for maintenance. Drilling was done halfway using a plastic cutter, Nipper, and File.
Wiring is completed by simply joining the existing Connector, which is the quintessential OEMAttachment.
It is also helpful to be able to download the illustrated Instruction Manual.
Material for Waterproof:It has a rubber lid, but the fit is squishy and unreliable, and it hits a nearby screw when closed, so it's not great here.
Aside from the amount of work and quality, I wonder if the most appealing feature of the Large is the ability to take out the USB power supply without any wiring process.
For reference, it took about 2~3 hours to do the work by hand.
View detail
Fits: Others
The Connector part is Compact, but the Body box is in the way.
As a result of changing Navigation from 5-inches to 7Inch, when connecting Navigation power to the USBConnector on the BOLT Shoulder Bag
It became difficult to do, so I thought it would be a good opportunity to replace it with this product, which is 2.4A compatible.
As mentioned in the Title, the Connector is compact and unobtrusive, but the Body (transformer from 12V to 5V?) is not. However, the Body (transformer from 12V to 5V?) is
I was worried about the mounting position because it is bulky.
Finally, it is fixed with Double-sided Tape on the Front side of the Top Bridge, which is hidden by the Bullet Cowl.
Red wiring is very noticeable as it is, so the Bullet Terminal is cut out and soldered on.
Spiral Tube and Wiring Cover were used to prevent the Red color from being seen.
The Connectors placed on the Handlebar are Compact and unobtrusive, so they look good when not in use.
View detail
USB Socket plugged in...
I think the slide style cap is great in terms of both gimmick and operation. However, since the SocketBody and the middle box are of a certain size, I could not pass through the small space around the Handlebar to hide the Wiring, and I had no desire to make it all Rose, so I ended up compromising. In this respect, it might be better to have an intermediate connector like other manufacturers, but it might cause contact failure, so it is a win-win situation.
The included parts are sufficient for most motorcycles, but a plain type terminal would have been a nice addition.
Test after installation is completed (using Anker USB Cable) After repeated unplugging and plugging several times, we were able to confirm that the device was energized. There was a feeling of being stuck until the device was energized, so there may have been something wrong with the molding of the USB Socket.
In any case, we are satisfied that the system is currently fully operational.
View detail
To my friend's Motorcycle.
Ordered for installation on a friend's Motorcycle.
The installation went without any problems.
I was thinking that the tools would be a Drill and a Hole saw.
Hole saws are expensive to buy new, so if you don't have one, you should ask a Motorcycle shop for one.
View detail
The lid can be conveniently closed with One push even while Gloved!
It is convenient to open and close the lid with one-touch while wearing thick gloves! View detail
Standard Items indeed!
[How is it used?
I used it on my Yamaha MT-25, which I use on a daily basis.
I chose this product that can charge more than two units because I have Situation to charge my phone and Income at the same time.
Was the one you received as per Image?
Fixed Parts and Extension Cord in addition to Body in Quantity:Set
How was your experience with it?
As for the installation, it can be replaced immediately if only the Accessories power supply can be removed.
In the case of MT-25, you only need to remove the Seat, part of the Side cover, and Meter and Wiring and you are done.
Since the Fuse is located just where it is hidden by the Side cover, we fixed it without any special treatment.
When wiring, only the Plus side is too short, so we made a wiring for extension, and when we work on it, we can use it. "Hey, hey, hey, DAYTONA-san, why is only Plus so short!" I am sorry for doubting you, DAYTONA.
Then, fix the Socket to the Multi Bar and you are done.
It is now possible to charge the battery safely and conveniently and quickly.
[Points to note]
The only thing that bothered me was the waterproof cap, which is removed by pulling it out, but the stopper is too small.
I thought it was a Point in need of improvement, as it will probably crack sooner or later.
How did it compare to other products?
We considered various Chinese USB power supply and Others.
In the end, I was right to choose DaytonaBrand's product, which has two mouths and is a standard item.
【Review】
SUB charging is now possible with easy installation.
It takes up only the smallest amount of space, so there is no clutter around the Stem.
View detail
It is good to be normal.
I had to replace the one I had been using because the plastic part of the USBOutlet cracked.
I expect quality from DAYTONA products.
View detail
Effective
My son has been using it for touring (using his cell phone as a navigation device) for a couple of years now, and it seems to be very durable without any trouble, so I put it on myself.
I modified the Bullet Terminal and connected it to the Wiring that is electrified when the key is turned on. (Because I was afraid that the battery would run up.)
In that case, the transformer was a little too large to fit in the headlight case.
I have also purchased a portable Holder and will use it for my next Touring.
View detail
Like a good luck charm.
I bought this product because I had a battery failure while touring the other day. I put it on to keep an eye on it. I put it on to keep an eye on the battery. I wear it like a good luck charm. View detail
MOTO GPS RADAR 12VPower Supply Cable Installation
I like it because Body is activated by key ON.
I bought it once before for my Body and installed it myself,
The voltage converter was attached to the car body with double-sided tape, but before I knew it, it was ha-gapped.
It looks like it was broken by vibration and the electricity stopped coming.
For a while, it was powered from USB,
I still repurchased and installed it for its waterproof property.
This time, I fixed it properly with Tie Band. 。 What is the result?
Power is taken out from the D-UNIT.
Wiring is necessary to consider the movement of the handlebar (depending on where the body is mounted) and to handle the wiring around the handlebar.
If you want to remove the Cowl with Wiring handling,
To identify the location and type of bolt (write the number on the cowl or put a plastic tape on it).
Bolts that have been removed should be inserted through holes in the corrugated cardboard in numerical order so that they are not lost.
Be careful not to leave Bolt behind for restoration!
View detail
Fits: HONDA CT125CT110 HUNTER CUB
Choice without hesitation because of the location.
Choice without hesitation because of the location.
It fits well and I'm satisfied with it, but I think it would be better not to use it in the rain.
I am sure it will cause a malfunction.
View detail
[K. TOUR] USB power kit review
Installation is simple. After watching the video, you can install it by yourself. Prepare and install sufficient equipment.
It fits well with the genuine part. Suitable for ct125.
The downside is that the rubber lid is difficult to open because the lid fits too tightly. Please be careful.
We strongly recommend that you install it. -------------------------------------------------- -------- The installation is simple. You can watch the video and install it alone. Prepare enough equipment and install it. It fits well with the pure part. Suitable for CT125. The disadvantage is that the lid is so perfect that the rubber lid does not open well. Please be careful. We recommend that you install it. Powered by Google Translator
View detail
USB power supply, installed
It is easy to install and power up, has 2 ports, and looks and feels good. View detail
Charge & Display Battery Volt
This is a very good type-c charger, with added functionality of voltmeter. You will know instantly if your battery having problems. For the charger, its type-c, with this you are ready for the future. The device also has 3 positions of clipping to the included bracket, so you can adjust according to your preference. My only dissatisfaction is i think the type-c connector cover can be improved. The mechanism wears out overtime as the rubber hardens and water could get it. View detail
Personal view after installation
good point
The voltage drop can be judged by the color of the back light, so the Timing of replenishment can be seen at a glance.
Easy to install
Compact and good in size without taking up too much space.
A bad point
The waterproof cover of the USB port is loose and does not fit tightly, so I am concerned about the waterproof effect on the Large.
The harness on the top of the body may not look good, depending on how it is attached, so it is better to have the harness on the bottom of the body.
Harness could be installed discreetly. (Personal view)
View detail
Fits: HONDA CT125CT110 HUNTER CUB
Easy installation
Easy installation with the help of YouTube installation videos.
Since the cable connection port is facing up, the problem may be solved by preventing dust from entering the unused insertion port when using a single port, and by curing with curing tape in the event of rain.
View detail
Fits: Others
No problem for now.
I bought a KaEdia Heller Socket from Amazon and after 2 years the contact went bad, so here it is.
Large than KaEdia, but slightly Plus in both size and weight.
It works fine on the tiger TIGER800 and so far the contact seems to be Large sturdy.
However, the LED is always on and glows, so I would not leave it plugged in.
The fact that they have to be removed when finished using them may cause them to be pulled out and inserted more often, which can quickly spoil the contact.
I read in other reviews that the lid is too small, but it is a waterproof lid.
If you screw it in with force, it will fit snugly.
However, the lid doesn't seem to be of much use because it can't be left plugged in.
View detail