Reviews
Fits: BMW HP4, BMW S1000R, BMW S1000RR
Appeal full score
Installation is very easy. No modification, no drilling, nothing at all. 3Pattern Stop-lamp and 3Pattern Blinker are available for your enjoyment. The instruction manual was not included, but it is clearly explained in the video, so I had no trouble. I am satisfied with my purchase of Large. It is cool. View detail
Fits: HONDA CBR600RR
The Rear area is even more Refreshing!
[How is it used?
Purchased for CBR600RR PC40 mid-term.
I had always wanted a LED Sequential Blinker with built-in Tail lamp, and I bought it because it was cheaper.
Lens thought it would fit since the car body is Black. [Color] I chose Smoke.
Was the one you received as per Image?
The box was so small that I wondered if it was really this one. But when I opened the box, I found a Tail lamp with a meticulously constructed structure, which I thought was better than I had imagined.
[Color] The Smoke feel is just as I expected and Parenthesis is good.
Was the installation difficult?
It's super easy, just remove the OEM Product and install it in the reverse order! Some OEM Bolt and other parts are used, but I think you can tell just by feel.
Wiring is also exclusive, so it is Honda's Coupler and Bolt On.
TST's products have a Large body video explaining installation, so if you check it out and do it, I think you can do it very Smoothly.
How was your experience with it?
After installation, I checked the operation and it was functioning well.
I did not know about the Tail lamp, but when you hold the Lever, the Stop-lamp glows Polished like a high flasher. I think I could have done without it, but the brightness of the Stop-lamp is perfect and I think it conveys the message to the following cars.
And look [Color] Smoke is now more Parenthesis-like with the Black body.
The LED Blinker is a high flasher because I haven't changed the Relay yet, but I checked it and it seems to work well during the daytime. It is perfect at night.
I need LEDRelay and will buy it separately.
[Included Parts:were they on?
The resistance came with Included Parts:, a Type that interrupts Wiring.
I tried to use it for a while, but it did not work. I think it can be done if you understand it well enough.
[Was there anything that disappointed you?
Nothing in particular! I'm glad I bought this product.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
There is no Instruction Manual
I am very disappointed. I was worried about the price of the product, but I am not satisfied with the large change. View detail
Good
Hello everyone, here I recommend everyone to buy this product, it is a very good product, it looks cool and lighter, it is a product worth buying View detail
Taillight Set Results in a Sleek Looking Rear End on the Grom
About quality and texture: I am happy with the quality of the integrated LED taillight set from TST. The undertail panel is made from ABS plastic while the taillight is LED and intergrates the indicators into the brake light. About the feeling of use: Final result of the installation is a sleek looking rear end on the Grom and the LED taillight performance is superb but the integrated indicators may become a problem in the future when road worthy inspections are required. Products to buy together: An LED flasher relay would also be desirable to purchase alongside the integrated LED taillight set to simplify correction of the LED indicator flash rate. Difficulty of installation: The process to install takes about one and a half hours. Remove the seat, rear fairings, rear fender and taillight. Modify the OEM Honda undertail to allow for installation of the TST undertail panel. Relocate the tip sensor and install the TST taillight and wiring harness. Install the rear fairings and seat. Some what difficult to do. Cost performance and comparison with other products: Good costing as you are getting a outstanding designed and manufactured undertail panel and taillight with intergrated indicators but the price is high as compared to to just purchasing a taillight with intergrated indicators that will fit into the OEM Honda positioning. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You do have to cut up the OEM Honda plastic undertail to install this Kit from TST so if you want to go back to the OEM Honda setup in the future you will need to purchase a replacement undertail. View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB650F
TST TST Brake Light modulator
Was the installation difficult?
Simply interrupt the Wiring of the Tail lamp.
How was your experience with it?
I think it will reduce the RISK of being rear-ended.
[Included Parts:were they on?
Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
▼There are 3 patterns of luminescence.
1, Electronic flash alert
FLUSH several times during initial lighting and continue lighting as normal.
2, PulsarBrake Alert
Continuous FLUSH when BrakeLight is on 。 This is a feature that is Standard Equipment on today's luxury and high-grade vehicles, or Race vehicles (Endurance Race vehicles, driving in the rain, etc.).
3, IntermiTentPulsar
There is a momentary pause between PulsarFLUSH "Intermittent." FLUSHPattern of the
View detail
Fits: KAWASAKI Z900, KAWASAKI Z400, KAWASAKI Z650
Does not fit. Do not buy!
I bought this to replace the Blinker on my z650, but…
When I brought it to the Motorcycle shop, it took 5 seconds. We can't handle it because it would be an illegal modification." I was pushed back.
I explained the situation to Webike and the return process was Smooth, which helped, but … it's hard to buy Parts other than OEM Product.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
CBR1000RR '13 did not fit the reverse car
CBR1000RR '13 It didn 't fit the reverse car. shouldn 't the webike side write down the proper indications?
I think many of the Cases were not adapted for other Impressions.
View detail
Used for ninja250R
The blinker of the NINJA2 Helmet50R broke, so we diverted this one.
Cars with similar holes can usually be installed.
Unlike the OEM stick blinker, the Small is hard to see because of its poor angle.
I think the design is good and modern.
View detail
Fits: YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZ8 10-15
Tst Mech Gtr
Overall product quality is ok. Satisfied with design and quality. Material of the product quite good. Bulb is looking nice and solid. Every part is solid and rigid..easily to install without any doubt. View detail
Superb service
I ordered the item on 5/3 and received it on 14/3. Since the item was not in stock at their warehouse, it took around 9 days for the item to arrive at my hand. For me, the service is quite faster for international delivery. View detail
Good quality and design
Good quality signals and easy to install. Honda wire connector also included makes the install super easy. Blinker relay for LED is required. Smoke lens but it is still bright. View detail
Cosmic LED Flashing
I bought it because it is one of the cheaper LED blinkers and its shape is horizontal and not sequential.
It looks like a manufacturer in the United States, but there is an installation video on the official YouTube Channel, so I watched it and installed it and it went smoothly.
If you look closely at the finish, you can see some plastic molding marks and a little BALI.
I chose the Smoked lens, and I think it looks good without the Orange standing out.
View detail
This taillight is really amazing
"Although there is no Z800's signature "Double Z" logo, it does not affect its attention to passers-by. There are multiple optional steering modes, and there will always be one that suits me. I chose the current popular lumen steering as Signal lights for daily street riding ------------------------------------------- --------------- Although there is no Z800 signature ""double z"" logo, but do not affect its attention to the passers-by, multiple optional steering modes, always have a suitable you, I chose the current popular fluent steering as everyday Street riding signal lights View detail
It can be used without problems
Installed with no problems and flashes well.
The screw and nut of the mounting part are made of plastic, but I don't think it's a problem because it's not the part where the load is applied.
View detail
Fits: KAWASAKI ZX6R, KAWASAKI ZX10R
It looks good!
[How is it used?
I wanted to make the Motorcycle look Black, so I just used the Stop-lamp.
Was the one you received as per Image?
Street Image
Was the installation difficult?
It took about 30 minutes.
How was your experience with it?
If you also use Blinker, you can Refreshing, but it won't pass inspection.
[Included Parts:were they on?
It came with a cheesy Relay.
[Was there anything that disappointed you?
I could sell it for a little less.
Other items that would be helpful
Request Maybe I should just use Stop-lamp and offer a cheaper version.
View detail
Used on Honda Grom
I thought I could pimp it out to a Grom, but I needed Conversion Harness.
I'm sure you can find it if you look for it at the same TST.
The replacement itself is easy, as you just remove and replace it.
View detail
![LED Front Blinker Easy Fitting [No Processing]](https://global.webike-cdn.net/uiu/impression/202110/21_1019039_61714350c6ab6.jpg)
Fits: HONDA CBR250R, HONDA CBR300R, HONDA CBR250R
If only it was a little more visible……
I bought this to reduce the protrusion as much as possible because the parts of the car body are generally easy to catch the Motorcycle Cover.
Exclusive? Because it is too dangerous to "Flasher as it is in the luminance of Position", Relay was processed by 2Rinkan though the Blinker relay of (Cancelation of Position function) I had it done.
Because it is a 300R conformity product of the North American Spec. originally, it seems that it is different from FOR JAPAN MODELMODEL.
According to Axxl, the distributor "I recommend ICRelay from POSH and KIJIMA. It seems
Since there is almost no protrusion from the vehicle body, the visibility from the front during the day is not flattering.
I think it is a good idea to choose CowlPaste Type.
View detail
Can be used with JC92 * Requires processing.
I decided that this was my only choice for front blinker.
Processing is required for installation.
The Position light will not light up. ＜If you modify the wiring, it will turn on.
When installing, it is possible to install if the original Rubber cover is cut off with Cutter.
Because it cannot be fixed with PlasticNut of the attachment, it is fixed with TNut M10x25x1.8mm.
TNut sells them at Home center.
I'm sure there are individual differences, but only our Right Side is damp and cloudy. (Lol)
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z125, KAWASAKI Z900, KAWASAKI ZX6R, KAWASAKI Z400, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZX10R
Not so convenient
The functions of the modular are good but programming is a bit inconvenient because you need to open up the cover. Should have provide a small hole for adjustment. View detail