Reviews
Refreshing.
I had a previous Blinker stuck on and was concerned about the back piccolo, so I found this and bought it. I had no work skills at all, so I used the shop direct installation. I did not use the Ceramic resistor that came with it, but I installed the ICBlinker relay and paid less than 8,000 for the labor. If you are not confident, I recommend you to use the shop. View detail
Refreshing!
I had been operating an OMBlinker with a smoked lens, but changed it for a change.
OEM. [Color] It was blurry and blinking and weak, partly because it was on Smoke.
After the change, I think it is now brighter as expected and next to the Number, making it more visible and safer.
As for wiring, it should be easy if you are knowledgeable about it, as there is an instruction manual available.
View detail
Very nice and compact!
[How is it used?
Purchased this product for my Rokudabo, I bought an Active Fender Eliminator, but since it is Center Up, the Rear area did not look very stylish, so I bought this product to replace the Fender Eliminator.
Was the one you received as per Image?
The blinker is not too thick and the smoked lens is very nice. The brightness is much brighter than the OEMBlinker.
Was the installation difficult?
I think it's a little Large weird, I bought a separate Connector to connect to the BlinkerConnector conversion for Honda.
I modified and installed Blinker's Wiring. It was a bit tedious, but anyone can do it if they look into it!
I also forgot to prepare a Blinker relay that is compatible with LEDs, so I recommend that you prepare one along with it!
How was your experience with it?
The Blinker itself works well and is bright enough! The blinker itself works well and is bright enough!
[Included Parts:were they on?
It included an Extension Cable and a spare Coupler.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
As the name implies, Compact
It's bright enough.
I like the Compactness of the Number, which is closer to the upper side of the Number than the same MODEL as the previous vertical Size of the Number.
Blinker relay with LED support (I used DAYTONA's) will not cause high flasherization without the use of a high flasher prevention resistor.
It is connected to the for KAWASAKI's BlinkerConnector conversion at the Bullet Terminal.
Since it is universal, it can be used for other manufacturers and car models with the same number mounting hole pitch.
View detail
CBR1000RR SC77 2017
I replaced the OEM LED blinker to refresh the rear area. When I installed the included Ceramic resistor, the Rear blinker did not blink at all, and when I removed the resistor, a high flasher phenomenon occurred.
I asked Manufacturer about it and was told that they put a very large resistor on it, so I bought a separate resistor and put it on, and now the blinking frequency complies with the safety standard! 。 Finally, 2Quantity of 30 Ohm:Set relayed and working properly.
View detail
The Rear area could be made Refreshing.
This time, we connected it with KIJIMA Conversion Harness so that it can be returned to Normal blinker as well.
The Conversion Harness was designed so that it could be returned if there were any defects.
View detail
สวยงามคุ้มค่า ติดตั้้งง่าย เมื่อติดตั้งแล้วทำให้ดูโฉบเฉี่ยว ที่เปลี่ยนเพราะของเดิมยื่นออกมาเสี่ยงต่อการหักหรือเสียหายง่าย แต่ของ active ชุดไฟเลี้ยวหน้า LED + กาบข้างหม้อน้ำ ติดแนบกับหม้อน้ำและเหมือนกาบข้างของหม้อน้ำสามารถดักลมได้ด้วย View detail
Great looks!
I was very worried because it was expensive, but it was the right decision. It looks great! I was originally going to replace it myself, but ended up having it replaced at the shop. I was very surprised at how expensive the labor was. I think it would be better to check in advance when requesting parts to be brought in.
OEMPannier compatible, looks great, TotalCost is a little high, wish it was a little cheaper.
Also, Parts is a Quantity:Wiring should be disconnected and a straight Bullet Terminal connection should be used.
View detail
Refreshing
Blinker can be set to Compact to clean up around the Rear! View detail
The Rear area has been Refreshing.
The appearance was quite Refreshing.
The position of the Wiring and Ceramic resistors must be well organized because of the narrow space inside the Tandem seat.
View detail
It's swooshy!
Looks pretty Refreshing! View detail
Eliminate OEM for Blinker installation marks.
ZX6R requires Bracket for License Plate Light, but eliminates unnecessary mounting holes for OEMfor Blinker. View detail
Stylish
I put it on zx25r with YOSHIMURAFender Eliminator.
I don't really know how to put it on since I got it at the store, but I like it because the blinker is integrated with the license plate and it looks very neat and clean.
View detail
BlinkerLED conversion
Adopted for GSX-R1000 with BlinkerLED.
We asked that the work be brought into the store.
It is clearly visible even during the daytime.
View detail
Refreshed
The rear area is now even more refreshing and cool. View detail
Threateningly low price
I think that this low price with Tail Lamp is a threat.
At first, I liked the wild feeling of the Tail Lamp of NORMAL, but when I changed it, this one is Refreshing and good.
View detail
I installed it on my ZX-25R?
I installed the Fender Eliminator Kit and this LEDNumber SIDEBlinker Straight on my ZX-25R and I am happy with it.
The connection to the OEM Wiring was a little tricky, but even as an amateur I was able to install it and it was Large and sturdy.
There was no place to install the resistor afterwards, but I processed the hole of the resistor base into a large size and fixed it with Bolt of the car body.
View detail
More Compact than expected, Stylish around the Rear
The OEMBlinker would sometimes get stuck when applying the &Cover when getting in and out of the car, and it was a plain Stress.
I don't dislike OEM, and I even thought it was good as Accent, but I wanted to refreshing the Rear strongly, so I decided to exchange it.
As a result, the Refreshing degree was more than I imagined and I was Large satisfied. It is more compact and stylish than I expected, but it is quite bright if it emits light, and I am not worried about the visibility at night.
The amount of light is not a problem, and I have the impression that there is an influence by the fact that the luminous point entered inside. If a car follows behind, it is difficult to be recognized by the second car.
The texture is good, and although it doesn't make a strong statement, it's very good for a sophisticated custom look.
View detail
Installed on ZX-25R
I installed it on my ZX-25R!
Smoked lens so it's not too bright at night!
View detail
Fits: その他 Universal model
Design is very good.
The product is very well made and can be installed reliably without any modification. View detail