【ACTIVE】LEDNumberSIDEBlinker Compact Review
More Compact than expected, Stylish around the Rear
The OEMBlinker would sometimes get stuck when applying the &Cover when getting in and out of the car, and it was a plain Stress.
I don't dislike OEM, and I even thought it was good as Accent, but I wanted to refreshing the Rear strongly, so I decided to exchange it.
As a result, the Refreshing degree was more than I imagined and I was Large satisfied. It is more compact and stylish than I expected, but it is quite bright if it emits light, and I am not worried about the visibility at night.
The amount of light is not a problem, and I have the impression that there is an influence by the fact that the luminous point entered inside. If a car follows behind, it is difficult to be recognized by the second car.
The texture is good, and although it doesn't make a strong statement, it's very good for a sophisticated custom look.
Responses
Other reviews
Compact is fine.
Product Name
ACTIVE Active LEDNumberSIDEBlinker Compact
Item Number
30100079
Vehicles
NINJA400
Number of man-hours
About 1 hour (depending on the person)
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because I wanted to choose by Active for peace of mind.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The Wiring area was difficult.
How was your experience with it?
Visibility is good.
[Included Parts:were they on?
Instruction Manualetc. was attached.
[Was there anything that disappointed you?
High price
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Not well made for the price.
[How is it used?
For ZX-6R G type.
If you use Fender Eliminator, you can't add Side Back because the Blinker is in the way.
Since I sometimes use it for Camping, I replaced it with this product which can hold the protrusion.
Was the installation difficult?
For Kawasaki cars, the Blinker is Coupler type.
This product cannot be attached as it is, so wiring processing is required.
Since I did not want to modify the wiring on the vehicle body side, I purchased KITACO's Kawasakifor VehicleBlinkerHarness and installed it on this product.
However, the space under the Rear Sets is limited and the resistor generates a lot of heat, so we did not use the resistor and replaced it with a blinker relay that supports LEDs to prevent high flasher. The Front has no problem even if the Valve is left as it is.
It is very easy if you have knowledge of the Wiring process, but if you do not have the tools, you may want to leave it to the store.
How was your experience with it?
There is absolutely nothing wrong with the functionality, but Wiring is Quantitative:Pair (for Left and Right) It sticks out from both ends and is a bit… spec. that can be seen in full no matter how you look at it.
It is a pity that the price is so high for an LED light, about 16,000 yen, but there is no attention to detail or consideration for the details.
[Included Parts:were they on?
Includes resistance, Tie Wrap, Clips, etc.
There is no Instruction Manual, but there is a Wiring diagram on the back of the box.
[Was there anything that disappointed you?
For this price, I would have hoped that Wiring would have made it a little easier to hide.
If you want to be picky, I think Wiring would be Refreshing to use a different LED Blinker.
[ITEMS TO BUY TOGETHER
・Electric Works Pliers、Bullet Terminal
・KITACO Kawasakifor VehicleBlinker lampConversion Harness
View detail
Very nice and compact!
[How is it used?
Purchased this product for my Rokudabo, I bought an Active Fender Eliminator, but since it is Center Up, the Rear area did not look very stylish, so I bought this product to replace the Fender Eliminator.
Was the one you received as per Image?
The blinker is not too thick and the smoked lens is very nice. The brightness is much brighter than the OEMBlinker.
Was the installation difficult?
I think it's a little Large weird, I bought a separate Connector to connect to the BlinkerConnector conversion for Honda.
I modified and installed Blinker's Wiring. It was a bit tedious, but anyone can do it if they look into it!
I also forgot to prepare a Blinker relay that is compatible with LEDs, so I recommend that you prepare one along with it!
How was your experience with it?
The Blinker itself works well and is bright enough! The blinker itself works well and is bright enough!
[Included Parts:were they on?
It included an Extension Cable and a spare Coupler.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
As the name implies, Compact
It's bright enough.
I like the Compactness of the Number, which is closer to the upper side of the Number than the same MODEL as the previous vertical Size of the Number.
Blinker relay with LED support (I used DAYTONA's) will not cause high flasherization without the use of a high flasher prevention resistor.
It is connected to the for KAWASAKI's BlinkerConnector conversion at the Bullet Terminal.
Since it is universal, it can be used for other manufacturers and car models with the same number mounting hole pitch.
View detail
The Rear area could be made Refreshing.
This time, we connected it with KIJIMA Conversion Harness so that it can be returned to Normal blinker as well.
The Conversion Harness was designed so that it could be returned if there were any defects.
View detail