Reviews
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
I should have made a different color... (This is my personal opinion)
The texture is indeed that of a MORIWAKIE Engineer.
You can see that it is carefully made.
As mentioned in the title, this product is available in Silver and Black.
When choosing between these two colors, I had a hard time deciding between them.
I chose Silver because the texture of Silver looked good and the price was a little cheaper, referring to the pictures of other wearers.
When I opened the product from the box and saw the actual product, I felt the texture was very good.
The actual installation can be seen in the picture, but my personal impression is that it is a little conspicuous for me, who likes to customize casually.
I will keep it attached for the time being, but am considering whether to replace it or Paint it....
The installation process was very easy.
Even a Custom novice like myself had no problem installing it.
View detail
Horn Replacement
I'm not sure of the effect yet, but it's a hell of a lot better than the pathetic sound of NORMAL. View detail
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
It looks GOOD!
Like Headlight, we were looking for some kind of protective Cover. Objective achieved! It looks great. But I can't deny that it looks a little expensive. And the screw to fix the Logo part, I am not sure if 4 screws are necessary, and the installation method is also a bit tricky as one screw hole is located near the part that fixes the Guard to the body, and the screw is not cut into the Guard, but a separate part of the Nut, so after installing this part on the MotorcycleBody, the fixation of the Logo part was a bit tricky. Therefore, it was a little bit difficult to fix the Logo part to the MotorcycleBody after installing this part. Therefore, I give it a rating of 3. View detail
If you don't care about the finish, it might be possible.
It had almost the same dimensions as the SR400 OEM.
The first product I received had paint buildup on the surface, a wound on the edge, peeling paint, and dead insects in the package.
Since we are not in Japan, we probably shouldn't be looking for OEM quality.
I returned and exchanged it because I had Checked it with the Package unopened, but the restocked one also had a buildup of paint in the center.
Well, I used it as it is because it is hidden from the front by Headlight.
Unlike OEM, even the edges are painted, which looks tighter and reduces the risk of rust.
The volume is sufficient. cheaper than OEM. Now I can take on the car inspection without any worries.
View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
horn
About quality and texture It's chrome, so it's neat and simple About the feeling of use The sound is moderate Products to buy together be not in Difficulty of installation It's not easy. It's very different from the standard Cost performance and comparison with other products The cost is very attractive About shipping and packaging It took a week and the packaging was great Any concerns, cautions, or advice when purchasing If you try to install it in the APE100 horn seat, it doesn't fit. You need to find the seat, and you need to reattach the wire View detail
Fits: Others for 12V * Attached bracket can be removed for use
It is an ordinary Horn.
Temporary regal need to purchase.
Large and heavy, but it's cheap so it can't be helped.
It does not fit in the light cowl and I am considering where to install it.
View detail
usually
I bought it for the cost and small space. It works fine, and the sound is lovely. View detail
It is a common Universal Horn, and the sound was as I expected.
It was easy to install.
LargeIt was good.
View detail
Compact
It is thick but the size itself is compact. This is a well known manufacturer, so I hope it won't break down. View detail
The performance is the same as NORMAL.
I've been using it for a while now. View detail
I will interfere with poning.
Since it interferes with Front fender in poning, process Bracket, remove rain shears and install.
Sound sounds like a trumpet sound, I do not like it much, but better than OEM.
View detail
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.I chose the trusted PIAA Sports Horn.I checked the frequency with YouTube many times, and selected 500Hz.I installed it on
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.
I chose the trusted PIAA Sports Horn.
I checked the frequency with YouTube many times, and selected 500Hz.
I installed it on KAWASAKI Z800.
Fortunately, the terminal form (flat 2-terminal type) of the OEM horn was the same as this one, and I was able to install it without extra processing. (Still, the terminal orientation of this horn differed, and I needed to reach out for the harness for it was a little too short.)
Its high beeping sound has now changed to a more deeper sound, and I'm happy with it!
I have an OVER engine slider on my motorcycle. And as you can see, I had to install the horn to a place very close to the exhaust pipe, for the clearance between the slider bracket and exhaust pipe was too little. I had to make sure that it didn't touch the bracket.
I am a bit worried about melting due to heat, for the horn body is made of resin.
Since it has a dust cover, I'm counting on its durability.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Since there was only one phon in one of the two, it purchased. If a little attachment is knowledgeable, it can be done simply. Since there is also sound volume as it is, I think that the driver of a car also fully hears. Since Plating processing is car
Since there was only one phon in one of the two, it purchased. If a little attachment is knowledgeable, it can be done simply. Since there is also sound volume as it is, I think that the driver of a car also fully hears. Since Plating processing is carried out, I also think whether to be dressed up. View detail
It is a horn of normal touch. An automobile inspection can also be cleared and it is the sound of touch with ordinary MITSU. If plating merely wipes with that which rusts easily (plating becomes cloudy in the shape of an orange skin) weakly occasi
It is a horn of normal touch.
An automobile inspection can also be cleared and it is the sound of touch with ordinary MITSU.
If plating merely wipes with that which rusts easily (plating becomes cloudy in the shape of an orange skin) weakly occasionally 556, it will become beautiful, but it is *3 piece.
View detail
It purchased to SR400. The structure itself is satisfying enough, if it thinks from a price by the result as for which inferiority is not even if it is solid and compares that it is pure. Although I purchased the low tone, though what is necessary
It purchased to SR400.
The structure itself is satisfying enough, if it thinks from a price by the result as for which inferiority is not even if it is solid and compares that it is pure.
Although I purchased the low tone, though what is necessary is just to become, it is a single youth, and a low tone feels different sense of incongruity from an image, when [ at which it uses by the double of a low and a high ] it sounds.
When purchasing, a double or a high tone is recommended.
View detail
It is used for 99ZX-9R. It is because sound stopped coming out. Since an authentic positive one required a little less than 4000 yen in the assy, the cheap thing was looked for. Since the space which needs to carry out hole processing etc. to
It is used for 99ZX-9R.
It is because sound stopped coming out.
Since an authentic positive one required a little less than 4000 yen in the assy, the cheap thing was looked for.
Since the space which needs to carry out hole processing etc. to attachment is narrow only in the thing shipped by an assy, cautions are required for it so that it may not interfere.
Although sound was SHOBOI, its automobile inspection also seems to begin to be calm and it was good shopping.
View detail
BMWF650CS is equipped. Since a pure sound stopped coming out, the cheap thing was looked for. Attachment did not use stay but was able to carry out bolt-on mostly. Sound is also practically equal and an automobile inspection also seems to be c
BMWF650CS is equipped.
Since a pure sound stopped coming out, the cheap thing was looked for.
Attachment did not use stay but was able to carry out bolt-on mostly.
Sound is also practically equal and an automobile inspection also seems to be calm.
Since the value stretched the original manufacturer's product, it was saved.
View detail
Since the tone color of a pure horn did not not much have liking appearance, it purchased by appearance. Although a tone color is touch called such thing kana -- well, appearance is self-asserted very well.
Since the tone color of a pure horn did not not much have liking appearance, it purchased by appearance.
Although a tone color is touch called such thing kana -- well, appearance is self-asserted very well.
View detail
The super multi DN meter was attached to APE50. Although it is necessary to change a light case into the thing (parts number 090-00-0029) of the company from an authentic positive one in that case, this light case and horn have interfered. Interfe
The super multi DN meter was attached to APE50.
Although it is necessary to change a light case into the thing (parts number 090-00-0029) of the company from an authentic positive one in that case, this light case and horn have interfered.
Interference is avoided using this stay.
Since the circumference of Wright was crowded, it could not attach, and it was made to move under Wright like a photograph in the part written in the description.
View detail
It is very good for a horn to be plated. When attaching to sr, it may change by a model, but since it cannot attach to 2007 models as it is, some processings are needed. Moreover, since no oscillating measures are taken, please carry out by yourse
It is very good for a horn to be plated.
When attaching to sr, it may change by a model, but since it cannot attach to 2007 models as it is, some processings are needed.
Moreover, since no oscillating measures are taken, please carry out by yourself to take oscillating measures.
View detail