Reviews
Rare Other Brand Product for 6v
This is a Horn for 6V electrical equipment, which is now rare.
Since most of the vehicles have been manufactured for a long time, we recommend replacing them with OEM replacements.
View detail
6Vfor VehicleHorn with few options
YamahaCHAPPY (CHAPPY) I purchased this one because the Horn of
I preferred the look of the long-hole Type instead of the round hole, but I bought this one because it was in stock and I could work on it right away.
It is easy to remove and replace the Horn that was previously attached when it arrived.
The OEM had two bolt fasteners, but since they could not be installed horizontally, they were fixed vertically with a single bolt.
No special Bracket modification or Wiring extension was required.
After installation, I tried playing Horn and it sounded fine.
The voltage is not very stable at 6V and the sound varies depending on the engine speed, so the sound quality cannot be evaluated in any way. (Lol)
"Pi" rather than Bee." It sounds like "I'm not sure.
It's not something I would ever use, but I'm glad I was able to get it to work in case of an emergency.
View detail
![[Closeout Product]HornGuard [A Type][special price]](https://img.webike-cdn.net/catalogue/images/116523/01160951_63c49fa5ca088_TS.jpg)
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100
I put it on ADV160.
I installed it on an ADV160, although it is not a fit.
It is attached by simply extending the Bolt hole to 8mm.
Horns are located in places where you have to look closely to see them, so it is a good Accent, albeit a self-satisfying one.
View detail
![HornGuard [B Type]](https://img.webike-cdn.net/catalogue/images/116523/01201727_63ca508c37230_TS.jpg)
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
Fashionable HornGuard
Attach the HornBody by co-tightening it with the Bolt that holds it in place.
Guard's Logo can be adjusted to any desired angle.
The other item in the photo is ZEAT Headlight guard ZE52-4100.
View detail
![Horn Guard [A Type]](https://img.webike-cdn.net/catalogue/images/116523/01160943_63c49dc75ce34_TS.jpg)
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100, HONDA CB650R
I guess it's just cool to look at.
It does indeed guard Horns, as the name HornGuard implies, but I think it's more about how cool it looks. View detail
เล็งไว้นานแล้ว พอดีมี point ส่วนลดเหลือเลยจัดทันที การจัดส่งแพคห่อสินค้ากันกระแทกมาอย่างดี คุณภาพสินค้าดีสมราคา ติดตั้งง่ายไม่ยุ่งยากถอดอันเดิมออกแล้วเอาใส่แทนได้เลย สั่งแบบเสียงโทนต่ำ ใช้เวลาในการจัดส่ง 15-20 วัน สินค้าน่าจะมาจากญี่ปุ่น โดยรวมถือว่าดี แนะนำครับ View detail
Sound signal for motorcycle Alfer II Silver
Good sound, everyone can hear and pay attention on the road. There is a feeling of security: they will hear and see. Beautiful, chrome, looks good on my black motorcycle. -------------------------------------------------- -------- Good sound, everyone can hear and pay attention to the road. There is a feeling of safety: hearing, they will see. Beautiful, chrome, look good on my black motorcycle. Powered by Google Translator View detail
Suitable for many car models, comes with mounting brackets. clear sound View detail
It has a good VINTAGE atmosphere.
It looks good on SR400CafeCustom with VINTAGE atmosphere and high class feeling. I extended the wiring and installed it near the front of the engine on the Left Side of the body like a VINTAGE English car. View detail
Plating is Beauty!
Horn of CUB has not sounded for some time.
I turned the adjustment screw to no avail and looked at the wiring, so I had to replace it with a new one.
We considered OEM, but decided to go with Other Brand Product.
Since it is an electrical system, it is a trusted Manufacturer, DAYTONA.
There were many kinds of DAYTONA products, but we decided on this one, which has Beauty Plating and Classical Design.
It is larger than OEM, so those with a Normal insulator should change the installation location. It may hit other wiring or fuel lines.
The carburetor and the indicator are external to my CUB. I changed the mounting position to the front and bent the included bracket.
Wiring was a little out of reach, so I made my own extension and installed it.
I think it would be more difficult to change the location if the product were smaller in size, but this would be difficult because of the cost of the plating cover.
I have been using it for about 6 months and the sound is Beauty and no problems.
You can see a little from the leg shield but it doesn't bother me because the design is good. It is also good that it has a luxurious feel.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Reliable Nikko Horn
The Horn is almost the same as the OEM Product except for the absence of the plating section.
The volume is quite Large, which must have been an improvement since then.
View detail
Sounds good
It has a fairly good Large sound.
As for me, I am satisfied with Large.
View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
แตรสวยเงางาม เสียงดังดี View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
อันนี้ใช้งานดีครับ ขยันเข็ดหน่อย View detail
![Horn guard [B Type]](https://img.webike-cdn.net/catalogue/images/116523/01201729_63ca50f770f01_TS.jpg)
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
It can be attached to JA60 and looks good.
Was the one you received as per Image?
As expected of MORIWAKI, it is massive and just like the Image.
Was the installation difficult?
Simply remove the Bolt securing the existing Horn and co-tighten.
How was your experience with it?
Cheesy looking OEMHorn will be Wilde (Lol)
View detail
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
Highly satisfied!
It's FashionCustom parts that stand out from the crowd!
The MORIWAKI construction is very beautiful, and the angle of the Logo can be changed with 4 screws!
Installation is very easy with Screw1 pc.
Highly recommended!!!
View detail
![SLOTED HORN 12V 113DB [DS-271996]](https://img.webike-cdn.net/catalogue/images/35311/DS271996_TS.jpg)
Sportster with this and now people take notice when its needed! Big improvement over the quiet factory one.
It's louder than...let's just say I've heard foghorns on tugboats that weren't this loud. She loves it. Exact match for the OEM cowbell horn. My stock bell was rusty on the inside and I'm not into all the aftermarket versions so I tried this one out. Almost the same hardware as Stock.It hooked right up with the original wiring harness on my Sportster. My only issue was the Short Screws. The ones that mount the Chrome Cover to the Bracket. Screws could've been a little longer. To install the Harness Clamp, Had to reuse one of the Stock Flange Screws. No Instructions. Put some Silicon grease on the terminals to prevent corrosion. Even uses the same terminals like stock.Great product and would by again if I had to. View detail
Sounds good!
Changed from OEM to this Horn while relocating Horn.
I haven't had a chance to use it much, but it sounded good.
View detail
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100, HONDA CB650R
Improved appearance
Parts completely for appearance improvement.
The quality of the product itself is high, and once installed, it is highly satisfactory.
When installing on the REBEL 1100, the OEM cover must be removed.
Be careful not to make the wrong connection as you disconnect Horn's Connector.
Work SuKill is within the range of what you can do if you know how to use the tools.
View detail
Installed on TT-R125LWE!
Size and sound are also good.
Installation was Bolt On.
View detail