Reviews
KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)
About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail
SP TAKEGAWA Meter Protection Film
About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail
Fits: SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy
meticulous manufacturing
It was good up to the point of installing the Coupler on the body side of the NORMALIndicator with the Coupler, but the remaining Black color code was installed with Tap for Connection and the Instruction Manual's Sky blue code. The sky-blue code is used to connect to the Quantity:There are 2 pcs and the first connection failed, but I opened the Tap and connected it to the dark sky blue cord and it lit up fine. View detail
![Temp meter stay "Marumie-kun" YOSHIMURA PRO-GRESS [Progress] Multi-temp meter support](https://img.webike-cdn.net/catalogue/images/126077/bg-tms-y02bk_01_TS.jpg)
Fits: Others
easy to read
Can be installed in the middle of the Handlebar Clamp
It was easy to install
Easy to check voltage, oil temperature, clock, and
I think it's a good product
View detail
![SPI-H19 Shift Position Indicator Exclusive Kit [for CB400SF H-VTEC SPEC 1/3]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA CB400 SUPER FOUR
I received a damaged product and it cannot be used after installation according to the instructions. I also shipped a broken monitor without QC.
Received damaged goods, which cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC ---------------------------- ------------------------------- I received a damaged product and it cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC. Powered by Google Translator View detail
exchange
I managed to attach it successfully by replacing only the cover. View detail
It's really just a dress-up.
As Title
When you look at the Meter when you're in the middle of a
It is a Recommendation for Carbon lovers because it is in your eyes.
I'm sure there aren't.
I'm thinking that the Meter Lens part also has a clear plastic.
I'm afraid you're making an unfortunate mistake.
I literally bought it as a Cover.
There is nothing in the Lens portion.
The installation was left to the store when the car was inspected.
BOLDOR 2009.
View detail
feeling of being tightened
The panel is simply affixed to the meter, but the gold color around the black meter stands out and makes it look tighter.
I am very satisfied with the product, although it is not visible from the exterior, so it is a self-satisfying product.
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
It's difficult, isn't it?
I put Meter's Film on the new car.
I thought it was no different than GlassFilm for cars.
He applied it with a mild detergent.
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dust ・・・・ tears
That's a tough one.
I wouldn't worry too much about it since it's for Meter Protection purposes.
Fortunately, it is expensive and contains two different types of films.
I'll try again next time.
You must be a PRO to be able to do this so beautifully.
View detail
It picks up Noise.
I thought I knew what ShiftTiming was even without the Tachometer.
The re-acceleration is inevitably slow in the SCENE that requires climbing the board.
I purchased it to keep track of RPMs.
While retrofitted, the position and Size are moderate, and the high brightness makes it easier to read than the OEM Speedometer.
However, the Clutch Cable runs through the Shift Up Indicator position, so it is not visible when the driver is riding. (I guess it depends on your body shape …)
Also, as is common with retrofitted tachometers, the rpm may rise or fall by around 500 rpm during cruising.
The performance is sufficient for me as I only needed to know the approximate number of revolutions.
I was able to correct my riding style because I was SHIFT UP at lower rpm than I expected.
The installation is more difficult because the tank needs to be lowered.
The illustrated Instruction Manual is clear and helpful and manageable.
However, although not a problem with this product, we had two problems during installation.
1. OEM Speedometer BracketMounting Bolt stuck at an angle.
It is fixed by biting into the Blinker Bracket and Meter Bracket.
The Bolt on the Meter Bracket was stuck at an angle, making it difficult to replace the Bolt.
(It's mainly Honda's fault since it's due to individual differences in the car body.)
2. occupies the power supply for Attachment (+ voltage shortage may occur)
The power supply for the Attachment provided on the Brake Side is used.
Already incompatible with USB power supply and Cigar socket.
The same thing happens when I make the connections as per the Instruction Manual, but
While the Cell is spinning, it seems to run out of voltage and reboots (re-opens).
The Harness length is long enough to reach the bottom of the Seat even through the bottom of the Tank.
I modified the Wiring to take power directly from Battery and it improved.
The voltage display function compares the voltage at the time of wiring according to the Instruction Manual with the voltage at the buffer.
The voltage seems to be slightly lower in the former. (It is not the fault of this product, but the spec. on the car body side.)
The following products were used for the Wiring change.
KIJIMA:ACC Branch Harness Kit]
https://www.webike.net/sd/21317023/
DAYTONA:Attachment Power Supply Unit D-UNITPlus]
https://www.webike.net/sd/24232600/
View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANA SPEEDO NEEDLES
I recieved the Katana speedo needles quicker than expected and it arrived in a well protected package. Once I get some free time I will install them. I was so impressed with the service that I did not hesitate to order another product. Thanks! JOHNNY "B" KATANA View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle)
To MAGNA50.
Cheap!
Fast arrival!
Good texture!
No complaints!
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
There's no way out of air.
I did it with a good amount of detergent and plenty of Kiribuki, but I couldn't get the air bubbles out. View detail
No problem, no problem, no problem
There is no wobble and no problem. View detail
An accessory should be mounted on the vehicle
With 125cc models produced by Hona in recent years. The vehicle's display clock often does not show engine rpm or battery voltage. These two things lead to disadvantages when using a motorbike, especially the voltage problem when the battery is weak, we cannot monitor the exact voltage index at that time. With this OPMID meter, the above disadvantages are resolved, the meter clearly displays rpm as well as the current voltage of the battery. The special thing about OPMID compared to other watches is that it has a touch screen that can interact very sensitively. From there, it makes adjusting parameters much easier and faster. View detail
Relief
I bought it because it was inexpensive. It is a good product and easy to read for a small size. View detail
Should be originally equipped with OEM
It is a must have item for a beginner of Rotary Mission. I used Seiran Kobo's Meter Holder for the Handlebar Post because it is too far away from the Meter and not very visible. The instruction manual is easy to understand with color photos. Sometimes when I put it in first gear... "0" Neutral on the Meter side disappears, so I judge it by that. View detail
Stress resolution at stoplights
When connecting to the Ignition coil, you need to pull out the original cable and insert it into the Ignition coil, which requires a lot of force.
The wiring routing from the side box used the hole at the bottom of the box, not the hole indicated in the Instruction Manual (Honda seems to have changed the routing spec. for the existing wiring. (Honda seems to have changed the existing wiring routing spec. and the wiring could not be routed.)
For the Attachment to be attached to the Handlebar, we had prepared a different Manufacturer's Installation Base, but the Included Parts:was pretty solid, so we are using it as is for now.
View detail
Fits: KAWASAKI MEGURO K3, KAWASAKI W800
This is the invisible Custom
First of all, there are not many aftermarket parts for K3 on the market, and Small raws have also been prosecuted on the Net in various ways, but could not find many.
I am sure that K3Rider who is reading this Review is also having a hard time!
Now to the main issue.
Two round MeterFilms and a protective Seat for the key slot.
Meter is Material:Plastic, so it seems to be effective against fine scratches and UV degradation
After applying the film, it has a more beautiful luster than the plastic surface, and the film is thick enough to be durable.
The key insert Seat protects the print on the Body side from being erased by rubbing with keys, etc., and is thick enough.
Construction
The meter section is a type that can be stretched with the attached gels (separately sold separately). There is a detailed instruction manual on how to install the meter, and oil removal, fine pride removal seal, air and moisture removal spatulas, and cleaner cloths are easily provided for easy installation.
The film is wetted with Gel, so there is time for it to dry, making it easy to correct the position of the film.
There were a few areas that did not drain off the water during the work, but the next day it was cleaned up nicely and in one piece with the Meter.
It's invisible (you can't see whether you put it on or not) Custom, but it's a lot of fun to work on it yourself!
View detail
Fits: SUZUKI GSX1400
It would be appreciated if the Instruction Manual was easier to understand.
I was fed up with the GSX 1400's confusing fuel level and bought it before long touring.
Wiring to remove the Right Side Cover and connect the wires is as shown in the photo. (The picture is hard to understand, but …) The Wiring is thin, so I ran it along the Tie Wrap between the Wiring and the existing Wiring without having to remove the Fuel Tank toward the bottom of the Tank. It took less than 30 minutes even for a clumsy person like me.
I have not been able to input the correction data yet because I did not read the Instruction Manual carefully and used the residual amount method from the full tan.
The residual volume method from full Tan, in my case, had an error of about 2 Liter.
It seems that the original error correction method is to display the amount used, then set the full Tan, and then correct the monitoring system. Please do not make a mistake.
However, I am not sure how long my GSX 1400 can run from the blinking of the fuel Lamp due to fuel depletion, and I think quite a few people are running on their own Data somehow.
If you go to Hokkaido, for example . At night, there are many places where even Large urban areas are not STAND. This will give you a good idea of the distance and approximate amount of remaining fuel to plan your touring.
Although not the cherry of Protec, the other day when their Shift indicator would not return from 6th gear, they immediately took care of the problem.
As I said, the customer service is also very strong, which is very helpful.
The product is a bit expensive, but it is trustworthy.
View detail