Reviews
![SPI-H19 Shift Position Indicator Exclusive Kit [for CB400SF H-VTEC SPEC 1/3]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
I received a damaged product and it cannot be used after installation according to the instructions. I also shipped a broken monitor without QC.
Received damaged goods, which cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC ---------------------------- ------------------------------- I received a damaged product and it cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC. Powered by Google Translator View detail
Fits: MV AGUSTA TURISMO VELOCE, MV AGUSTA SUPER VELOCE 800 SERIE ORO, MV AGUSTA SUPER VELOCE 800, MV AGUSTA RUSH 1000, MV AGUSTA F3 RR, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE 800, MV AGUSTA BRUTALE 1000RS, MV AGUSTA BRUTALE 1000 SERIE ORO, MV AGUSTA BRUTALE 1000RR
Unfortunately, I can't Recommendation.
I put it on a BRUTALE 800RR MY22 MODEL.
When I first put Antiglare on and did a test run, I peeled it off because in strong evening sun conditions, I could not recognize any areas such as the Blinker display at all.
I peeled off the Antiglare and tried to use the Super clear, but there was a white discoloration in the center, as if it had been bent somewhere. I can't blame the Super clear because I may have stored it in a bad way, but I was disappointed that I paid 2500 yen for it and this was the result.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
Durability is difficult
It broke down right away. 。 It's a shame View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON FX Systems, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily
It's broken
I installed it and drove about 80km and the needle stopped moving around 75km.
Stopping the system does not restore it to its original state.
Worst product I've ever seen. Lost my faith in them.
I wonder if you can replace it.
View detail
So bad
I purchased this product because my 30 year old KIJIMA product started to rust.
The shape is different and it doesn't fit well. I have a FOR JAPAN MODEL E3, but is there a difference in the shape of the meter depending on the year?
No year model designation in the description.
It says that it focuses on the beauty of plating, but I think it is an inexpensive Chinese product that will not shine as brightly as KIJIMA products even if it is polished to a poor plating base.
We decided to re-plating KIJIMA products.
We purchased only the Upper Cover, but I think you should check the shape of your meter before purchasing.
View detail
Fits: HONDA Super Cub 110, HONDA cross-cub 110, HONDA Cross Cub 50, HONDA Super Cub 110, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 50 Pro, HONDA cross-cub 110
Defective product.
Poor quality for the high price. It malfunctions all the time and has many contact failures (even contact resurrector doesn't work). I bought it with the determination not to complain even if I was cheated, but I am so frustrated that I rated it because I just can't agree with it. View detail
Solder failure
Blinker signal line Solder defective
Since it was purchased new, I assumed there were no initial defects, so I removed the tank and inspected the wiring extensively.
I'd really like to charge the actual cost.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Opmid multimeter is way better than the Takegawa super dn multimeter
I sold my opmid to purchase the takegawa. I wish I wouldn't have. The takegawa is constantly changing settings on its own. It worked fine for the first 2 months it was installed then all the sudden I have to program it every time I ride my honda monkey. Super dissatisfied with this product. View detail
Gone in six months.
Measurements were quite accurate.
However
After about 6 months, it started blinking abnormally and the measurements were crappy.
I tried Setup again, but to no avail.
I can't even find the warranty card so it is going to the Garbage box.
It was an unnecessary expense.
This product is shoddy, just like the Chinese products!
View detail
Someone who is used to pasting.
The instruction manual is in English, but the material is too thin and does not listen to me even if I follow the instructions. There is no Spare, so I gave up. If I could stick it well, there was no wound on the screen even though I rubbed it a lot this time, so I guess it is resistant to wound. View detail
Too soft.
After applying the film, I tried to lightly push out the air bubbles with my fingernail to release them, but the film was clearly scratched. View detail
MeterGuard installation
I have not been able to find a store that can install the product, but I have been able to find a store that can install the product. View detail
Fits: SUZUKI Address V125 CF46A, SUZUKI Address V125 CF46A
Grease not painted.
[How is it used? Commuting Street Riding
Was the one you received as per Image? Approximately the same date as the Net photo
Was the installation difficult? Installation is not a problem.
However, no Grease is applied to Cable at all.
Functional issues as a product. Disgusting. 。
How was your experience with it? Silicon grease applied and installed. No problem in running.
[Included Parts:were they on? There it is.
[Was there anything that disappointed you? The fact that the Cable is not oiled is not a problem.
Should have bought OEM.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50
Before we talk about satisfaction.
The one I received was the wrong model number.
I bought the correct one at another Site.
View detail
China Quality
Just as the warranty was about to expire, it stopped working altogether.
I asked Manufacturer to repair it (for a fee), but they refused.
No repairs. They want me to buy a new one.
I see that it breaks easily in other Reviews.
I feel that many of this Manufacturer's products are terrible in my experience.
View detail
Everything is China Quality
It broke just as the warranty period was expiring.
When I asked Manufacturer to repair it (for a fee), they refused.
They did not repair it. They want me to buy a new one.
I see many reports of breakage in Reviews of this item (Single Item).
I think many of this Manufacturer's products are terrible.
View detail
There was a Size Film that did not fit the ROCKET 3R Meter
When I tried to attach it to the ROCKET 3R Meter, the second film from the Left and the second film from the Right did not match the shape of the Meter's Display.
The radius of the arc was a little large and the length was long. I decided not to paste the film because it would not look good.
View detail
![[Optional Parts] PG-660 Pulse Generator Rotation Signal Converter](https://img.webike-cdn.net/catalogue/images/41170/11295_01_TS.jpg)
Fits: YAMAHA SEROW, KAWASAKI KLX, KAWASAKI D Tracker, YAMAHA SR
I misread the guarantee of conformity.
As stated in the product description This product is part number 11294 (TVM-01). It seems to be an "Option Parts for UniversalTachometer" and cannot be used with UniversalTachometer. I have connected it to 3 different UniversalTachometers and it is completely useless. I had no choice but to buy another product and throw away this one. View detail
Approximately six months after purchase, the
About six months after purchase, the Meter's display light stopped working due to poor contact.
Furthermore, during touring, the Knob portion of the mileage meter is removed and the meter number cannot be reset.
We plan to replace it with a new one from another Manufacturer.
Complete shoddy product, no recommendation.
View detail