Reviews
LED
The LEDs are no longer lighting up, so they are being replaced.
I would have liked to have only LEDSingle Item, but the cheapest replacement seemed to be this product.
LampSingle Item sale because I don't need a Connector, and it would be helpful if it were cheaper.
View detail
The price difference.
What is the difference between LampSingle Item and this one? It is unclear.
LampSingle Item purchases are a little cheaper, so it's a good deal.
View detail
Fits: MOTOGUZZI V85TT, APRILIA TUONO V4 1100, APRILIA TUONO 660, APRILIA SHIVER 900, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RS660, APRILIA DORSODURO 900
[Color] Only Clear is useful.
I was concerned about the reflection, so I applied Antiglare first, but the lack of transparency made it very difficult to see the screen, so I removed it immediately. It is dangerously hard to see.
[Color] I am satisfied with Clear in terms of screen protection as I can't even tell if it is attached or not.
Antiglare was Garbage.Quantity:1 Set of 2pc. if available [Color] I think I'll just use two Clear cards.
View detail
Short
The LED of the key transfer installation seems to have been shorted, and since it was sold as a Single Item, it was replaced.
Smaller size and mounting parts can be easily detached, so care must be taken when touching the wiring.
It is a small LED, but the price is there.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I just wish the colors were longer.
Quantity available at 1/6th the price of OEM Parts:If you don't care about the quality of the damper rubber, this is a good Quantity because the parts are hidden inside the meter cover.:I think it's Set.
However, if the collar were a few millimeters longer, the Meter would move more wobbly and absorb shock.
View detail
Fits: TRIUMPH Tiger 900 Rally Pro, TRIUMPH Tiger 900 Rally, TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900 GT, TRIUMPH Tiger 900 Rally Pro, TRIUMPH Tiger 900 Rally, TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900 GT
Is it a work sKill problem….
I was not able to put it on without any air bubbles, but I was able to put it on without worrying about it. At any rate, it looks so much better than without it. [Color] I feel Clear. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Works but Broke
The left mounting post seperated from the meter body at the weld during install. At first I thought I over torqued it but I discovered rust color at the both the post and meter. I assume this is a bad weld so I gave 3 stars. View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
Good visibility
I use it on my 5 speed Grom and JC92.
It's easy to put it on. It's like putting a cover on your phone.
The price is reasonable and the Meter visibility is fine.
Too bad I had to install it after it was scratched. w
If you have a new car, we recommend you to install it as soon as possible.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Waterproofness is questionable.
I used it to convert the front tire of Kawasakiz1 to 18-inches.
The front hub bearing is not covered like the NORMAL meter gear, and the bearing is exposed, so there is a question about waterproofness.
View detail
not feeling good
Because I bought the electronic meter of this brand, but the cable for measuring the speed is missing after installation, I need to buy the electric speedometer adapter of this brand to use it together, and the adapter product is expensive. So I don’t feel too good. View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
Do you need it?
The size and ease of application are fine. The edge will be floating, so it is better to plan to replace it when it gets dirty.
After buying it, there is a question whether it is necessary in the first place without Touch panel.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
Dust is the …
It's as difficult as putting it on a cell phone screen.
Dust is in … two sheets each, so that's good.
View detail
The texture is good, but…
"Bracket for Motorcycle [MOTO GPS RADAR LCD Option]" I bought it for the installation of MOTO GPS RADAR4.
It's not designed for that purpose, so it can't be helped, but the size of the connection hole was different, so I had it machined at a motorcycle shop.
I fixed it to a 22.2mm diameter bar holder, but it moved round and round even though I tightened it tightly, so I put a thin piece of rubber in between to prevent it from slipping. So I put a thin rubber piece between them to prevent slippage. I wish it had been processed to prevent slippage.
I have chosen Black, and the texture is very good, but the Silver of Washer in Center stands out a bit.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe, KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Head lampBracket and Quantity:Set to replace it
[How is it used?
Dress-upCustom daily use
Was the one you received as per Image?
Meter angle was different from Image.
Was the installation difficult?
The OEMMeter&Head lampBracket can be removed by removing the wires from the Caliper and the Master. It is recommended to install head lamp brackets of the same manufacturer at the same time, but it is complicated to remove the fork, align the brackets, and consider the interference with the body of each bracket.
How was your experience with it?
For all the hard work I put in, I feel like there's not much change in appearance. (I'm actually up about 40mm).
[Included Parts:were they on?
No. Bolt is OEM.
[Was there anything that disappointed you?
As stated above, there is little change in appearance.
Other items that would be helpful
Point and hang of installation/Anyway, prepare in advance.
The Meter Bracket itself is easy to install.
Note:If you use the company's Head lampBracket, you will have to do more work.
Items you should buy together/Head lampBracket
There is not enough room to install the parts without interfering or machining the long holes because it is a newly developed part.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Large is strange for clumsy
The air vent was LARGE weird. I was clumsy, I used two sheets, and in the end, there was a little left. It's also a bit Large than the LCD. View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA Tracer 9
It really got rid of the air bubbles!
It's a foreign product, but the translation (please input it here, the explanation is also written. But, I started to work without understanding the meaning.
In the meantime, clean the Meter part with the included CleaningKit and wet the Meter with Spray with detergent to work on it. It'll start to thirst soon, so get busy!
After I put it on, whoa! There's a bubble! I tried so hard to push it out, but it didn't go away.
Well, Quantity:It comes in 2 Sets, so let's hold out for this Season.
and a week after such work.
When I looked at the Meter, I saw that all the bubbles were almost gone! The product description didn't lie,... (Lol)
Unfortunately, the Tracer9gt is divided into a protective seat for each side, so there is a gap between the seats. It seems to collect dust.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Meter Bracket replacement
OEM Meter angle was bothering me, so I replaced it.
Functionally satisfactory, but a little disappointing because of the high price and sweet paint job.
View detail
If you can't process it, you'll regret buying it.
The texture is good, but the installation is too large.
First of all, it doesn't work with Exactly. If you can't do it, don't buy it. I was able to get it to fit by pushing and pulling on the large hole, but it doesn't flex like the OEM, so if you try to force it, it will crack. It's strong but not rigid. If you force the screw in when the hole is not correct, you will damage the screw hole.
View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
subtle
If it's about protection, I'm satisfied, but the quality is not very good.
No matter how you crimp it, the edges will still float.
I feel that the price is a little high because I feel like I want to replace this Level in a short period of time.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
neither good nor bad
After a little use, the edges started to float slightly.
Probably not enough adhesive on the subtle curvature of the edge of the screen.
Well, it's generally stuck to the surface, so if you don't mind the details, I think it's large and durable!
View detail