Reviews
SP TAKEGAWA Meter Protection Film
About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSS CUB, HONDA CROSSCUB110
Tachometer for Motorcycle
The OEM CROSS CUB 50cc does not have a Tachometer, which I discovered in my search.
The CROSS CUB50cc is a 4Cycle, so it was displayed correctly without any setting changes, although it can be made to display correctly in 2CycleEngine and other engines by changing the settings.
There are other types of Tachometer made by Mukawa, but this product is simple enough to display the Rev limit in addition to the RPM.
The Rev limit can be changed by operating the button on the reverse side. The OEM Rev limit for the 50cc CROSS CUB is 9000 rpm, so I set it at 8500 rpm to be on the safe side.
The Yellow Lamp lights up before the set 500 rpm and the Red Lamp lights up at the set rpm.
The Instruction Manual also states that if this product is installed, the display may come off if a Fog Lamp or Ignition coil from another company is installed.
Other items in the photo are KIJIMAHandlebar Mount Bracket, NeoFACTORY 48mm Voltage Meter White Panel Stainless, Eye PRO ShiftIndicatorAPH8 Red
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
It fits neatly!
[How is it used?
I had been using Z50J OEMWiring for about 10 years,
Harness was replaced in consideration of deterioration.
The Engine starts up better.
Was the one you received as per Image?
It was as confirmed by the description on the ManufacturerHP.
Was the installation difficult?
Wiring diagram is included, but because of full-wave rectification,
The connection was made in conjunction with the Wiring diagram from the previous processing.
Only the Connectors on the Regulator are processed.
Wiring around the Headlight is short because of the 3cm LongFrame, though,
The length is the same etc. as OEM.
How was your experience with it?
Meter and Tail lamps are made by Takekawa,
The connection was ready.
We use an external Alarm, but diverted the Harness kit Wiring,
Quantity since OEM:1 Set of 4pcs. could reduce the wiring in the eye photo.
[Included Parts:were they on?
Wiring diagram and Connector for Charger connection are included.
View detail
The night is fun.
It feels quite bright.
If you adjust it with the mounting angle, you may not be dazzled by oncoming cars, etc. lol
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Parts that make you wish you had put it on earlier.
My MONKEY is 88cc.
I have heard many things about 88cc engines, such as that they are difficult to ride due to lack of torque or that the idle is unstable, but this is not the case at all, and the response is improved and the engine is fun to ride.
View detail
Fits: HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110PRO
very good
I really liked this product. It was cheap and the delivery was very fast. I will definitely use it again next time. Thank you. You can definitely feel that the quality of the parts is different from other products.It was also very easy to install. -------------------------------------------------- -------- I really liked this product. It was cheap and very quickly delivered. Thank you again. It seems that the quality of the parts is certainly different from other products. The installation was very easy and good. Powered by Google Translator View detail
There were no problems.
The light came on without any problem. I was able to use it normally. View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
Durability is difficult
It broke down right away. 。 It's a shame View detail
Blinker I just switched from a 10w to an 8w bulb and it doesn't blink.
Simply remove the OEMRelay and install the Mukawa Relay in the same way.
I appreciate that it also comes with two different Adapters.
I would appreciate it more if the price was more affordable!
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB
Friendly Wiring relationship
Used for CUB.
The supplied Meter panel was not used.
Anyway, the Instruction Manual and structure related to Wiring are very kind. At first, I was working in a messy way, but I was impressed by the SMART design of the wiring, such as the Harness for taking out the rotation signal.
The instruction manual is well written at a level that anyone can install the product if they read it carefully, so even beginners should be able to install the product if they try their best.
View detail
Brightness is no problem
[How is it used?
I bought this for Main's XJR1300C.
We used Rizoma's Fender Eliminator Kit, which came with the Fender Eliminator. [Color] I have been using Clear's LED Tail Lamp, but I wanted to change my mind, so I replaced it with this Smoke Tail Lamp, which has the same mounting pitch as the LED Tail Lamp.
Was the one you received as per Image?
Image Street [Color] Smoke is a nice touch.
I didn't expect it, but it was the exact same Lamp as the Tail lamp that came with Rizoma's Fender Eliminator (lol).
It was probably a Tail lamp from the same country of production (China or Taiwan?). It was a Tail lamp of the same country of production (China or Taiwan?). No way, no way. (LOL).
Was the installation difficult?
There is nothing particularly difficult. The Bullet Type Terminal has already been carefully processed on the Body side.
How was your experience with it?
I am happy with the nice Smoked lens.
[Included Parts:were they on?
Bullet TerminalQuantity for Wiring process on the body side:Set is included.
I didn't use it, but...
[Was there anything that disappointed you?
The Rizoma Tail lens had EMark, but the Mukawa Tail lens did not.
I think they are exactly the same, so it would be more secure to have them when installing them on a motorcycle that is subject to vehicle inspection.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA DAX, HONDA LITTLE CUB, HONDA LITTLE CUB
Sp takegawa smoke tail
Very nice product takegawa as always, quick shipping with good quality of packaging, thank you we bike are the best View detail
Replaced due to poor contact
This is a regulator to protect Digital meter. Recently, the power supply of the meter was frequently turned off, and we traced the problem back to this Mini regulator. I replaced the Mini regulator because it had been used for more than 15 years and seemed to be causing poor contact due to age-related deterioration. After the replacement, the event that the power supply of the Meter falls did not occur anymore, but it is only confirmed in Idling state, so I would like to confirm it by running the Meter. View detail
Required whenever you replace Sprocket.
I bought this Meter thinking it was strange because my fuel consumption was 45km/L when I set the Driven Sprocket to 16T.
I found a setting item for Sprocket tooth number and Tire circumference length, so I set them, and sure enough, it was 59km/L.
Large change was also useful and useful custom parts to know accurate information.
It is good to display the exact RPM digitally, but since it is not used for Race, it would be better to use an AnalogMeter for that, and display Odo and Trip at the same time in the display area for that, or make the clock display larger.
I used HandlebarBrace's Bracket to make it high mount.
View detail
Fits: Others , HONDA Giorno, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MAGNA 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA GIORCUB, HONDA DREAM50, HONDA DAX, HONDA Byte, HONDA TODAY, HONDA TODAY
Very good product
It is inexpensive and very stylish. This is my second purchase.
Replacement can be done with a Phillips screwdriver.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Efficient and intuitive
It's a stylishly equipped tachometer that motorcycles don't have. When I open the product, there are two instruction manuals and this makes me confused. One is a universal manual and the other is a manual for Monkey125. If you can distinguish the two well, it's not difficult to install. View detail
bright
If it was so bright, I wondered why I hadn't put it on sooner.
The brightness is perfect, but I had to buy a Crimp Tool for the Bullet Terminal, and the Crimp did not work well, and I am a novice at installation.
It would be even better if Wiring would sell it complete, even if it costs a little more.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
MultiDNMeter
I chose Takegawa's DNMeter because I was looking for a replacement for my NORMAL, which does not have a Tachometer. View detail