![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Stick Reflector](https://img.webike-cdn.net/catalogue/images/103698/1108709_01_TS.jpg)
Since M5.
I bought it because my homemade Fender Eliminator cracked when it was brittle.
I chose this one because Screw was M5.
It is a very normal reflector with no particular problems.
View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
If you think you're missing something...
Almost done with TW's Restore and put a Number on it.
Hmm I don't know. It's not enough.
No Reflector Sweat
I don't think I'd be caught without it.
tentatively
I feel like I've become cool.
View detail
![Slim Reflector Kit](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0309/1834047_20220819163754131_TS.jpg)
Simple configuration
[How is it used?
Since the Fender Eliminator Kit was relocated, the Reflector that had been used until then could no longer be used, so we chose this one with the License Plate co-tightening type.
Similar products are available from Active and KIJIMA etc., but I chose DAYTONA's because it was in stock and inexpensive.
Was the one you received as per Image?
It was just like the picture.
The condition of the paint was also fine.
Was the installation difficult?
Replacement is easy as it is simply tightened together with the bolt on the License Plate.
One Side at a time, you can remove the Bolt and slip it into the gap and not worry about dropping it.
How was your experience with it?
Naturally, it was Exactly to the Size of the License Plate.
Visibility is also sufficient.
The Cushion works well and the contact with the Number is just right.
[Included Parts:were they on?
Mount, Reflector and anti-vibration Cushion are included.
[Was there anything that disappointed you?
Not particularly
【Review】
It is an inexpensive and solid reflector when converted to a Fender Eliminator Kit.
Of course, it also passes vehicle inspections, so it is safe for vehicles that are subject to inspections.
View detail
![Reflective Tape (Beads)](https://img.webike-cdn.net/catalogue/12169/v684-1_TS.jpg)
It reflects beautifully!
I purchased this product to increase safety as I drive more at night and use it attached to my Rear Fender. I think it contributes to safety because of its beautiful reflection. It is easy to process and can be cut into any shape you like. I also put it on the color cone in my garden. It can be used in various places, so I can recommend it to everyone. View detail
![Reflector Slim 3](https://img.webike-cdn.net/catalogue/images/47959/305-2146_01_TS.jpg)
Reflects light well and contributes to safe driving.
I bought this for Repair because one day I was parking my Motorcycle on the parking lot and it was stripped by the Prank. I am very happy that I was able to attach it to a Fender Eliminator made by another company. The shape is cool too! View detail
![Reflector](https://img.webike-cdn.net/catalogue/images/37814/ha5590_1-ha5590_TS.jpg)
Impact is greater than expected!
Needed for car inspection? I bought it because I thought I might need it for my car inspection.
Bought it for the look of the picture and the price!
The texture etc., is very good.
When installed, it has a strong presence.
View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
ACTIVE Reflector
Slim type Reflector.
It's a shame that the Bracket was twisted when installed and was not slightly straight.
View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
Reflector kit
I bought it to go with my Active Fender Eliminator Kit! It looks really cool now that the License Plate has been reflashed! I recommend this product because of its low price! View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
Japanese Vehicle Inspection Correspondence
I am riding XL1200C SPORTSTER 1200, and I had been struggling with battery up. I changed the stop lamp and stop-lamp to LED, just to ease my mind. I like it because it looks very modern, but I lost the reflector. At first, I had installed Universal Lens, but I was told that there was a problem with the vehicle inspection. So we installed this product. I chose the silver color because it is white. It blends in so well that you wouldn't even notice it if you didn't talk to me. View detail
![Multi-reflector](https://img.webike-cdn.net/catalogue/images/123773/6968_SUB1_TS.jpg)
Installed in Motorcycle yard.
I installed it in the parking lot for my motorcycle in my small yard on the way home from touring. It is very sturdy so even if I ride up on it with my motorcycle it doesn't scare me! It also contributes to safety as it reflects the light and shines well! The double-sided tape on the back has good adhesive strength and does not come off! View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
Looks Refreshing!
Looks Parenthesis better than OEM Product! View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
SMARTest shape in compliance with laws and regulations
We replaced the Rear Fender of our CB400SF with Active's Fender Eliminator Kit, but since the Reflector was sold separately, we chose this product.
https://www.webike.net/sd/24858765/
This is a combination with Kore.
Various companies offer lineups in various shapes, but we felt that this was the best in terms of design and adopted it.
Photo Quantity:Limit the minimum area on the Rule as shown in the 1pc. eye (instruction manual). [Color] Clear. Excellent.
The reflective patterning is also well designed and is inspection compliant.
It has a long hole to adjust the height of the reflector by about 5mm, which is called ReflectorSlide function. This allows the reflector to coexist with a frame (depending on the product).
The Number and Reflector surfaces are folded at about 45 degrees, and the angle at which the Reflector is generally perpendicular to the road surface is desirable, so it is best to fine-tune the angle to match the Fender Eliminator design.
The Fender Eliminator on my own CB400SF Active is 40-Degrees, so a 45-degree finish should be slightly inverted Slant, but in fact it is almost vertical, so no correction was made.
HondaDream stores, for example, have a strict policy of not allowing illegal Custom vehicles to enter their stores, so it is necessary to take these measures when sending them in for inspection. (I was told by a Dealer)
Some of the cheap ones may have the red color of reflector faded by ultraviolet rays, or the design of the reflective parts may be so bad that the car will not be inspected after all. However, it is safer not to add any parts to the class for vehicle inspection.
View detail
![Reflective Lens](https://img.webike-cdn.net/catalogue/12169/6704-1_TS.jpg)
Durable!
I put one on the back of my car and the rest at the entrance to Garage. I scraped it on the ground once when I fell over, but it was strong and only got a few scratches! It's a great job and it's a Recommendation! View detail
![Reflective Protector](https://img.webike-cdn.net/catalogue/12169/v756-1_TS.jpg)
A bit expensive but high quality! Be safe!
I have experienced an accident with a child, so I put this product on my Rear Bag for safety first!
I feel that the number of times I have been forced to close the distance between cars has decreased since I completed the application! Safety first! I will be an active Rider for life! This is a recommendation!
View detail
![Reflective Protector](https://img.webike-cdn.net/catalogue/12169/v756-1_TS.jpg)
If you're willing to rip it off, be careful.
Items convenient for products that also have a protector, so even if they are attached to protect scratches, they look like they are attached to improve visibility.
However, when peeled off, it left a mark and was a type of adhesive that was difficult to remove even with Seal peel, so I recommend using another double-sided tapeetc. if you are thinking of peeling it off.
View detail
![Reflective Sheet DX](https://img.webike-cdn.net/catalogue/12169/6697-1_TS.jpg)
Thick enough! Reflects well too!
We were looking for a reflective Sticker to improve safety. At first, we were looking for a reflective Sticker sold at a hundred-yen store.
I was dissatisfied with the adhesive strength and stuck this product on it.
I am satisfied with the results! When degreased properly, it does not peel off even if it rains, and it reflects the light of following cars perfectly.
It contributes to safety improvement! It is easy to apply, so it is a recommendation for everyone!
View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
With Fender Eliminator Kit
I purchased this kit along with the Fender Eliminator Kit.
It is a Slim shape, so it is good for Refreshing.
Installation is nothing difficult as it is simply inserted after the License Plate.
View detail
![side reflector](https://img.webike-cdn.net/catalogue/10073/81-1260_TS.jpg)
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII
very good
It is usually a good product and the price and texture are good enough! View detail
![License Plate Base & Reflector W122](https://img.webike-cdn.net/catalogue/images/37814/ha5796_1-ha5796_TS.jpg)
I think it's good
It is a good product with a beautiful finish.
If I had to say something, it would be nice to have a more vertical lineup to prevent mud splashes.
View detail
![Reflector Kit Type 3 Slim](https://img.webike-cdn.net/catalogue/10458/ref_type-3_TS.jpg)
No complaints
When MAD's Fender Eliminator Kit was installed on a CB650R, this reflector was used.
I have no complaints about the cospa, texture, or design.
View detail