Reviews
Is the Reflector Bracket a little long?
The Fender Eliminator Kit itself is of good and stable quality, as it has been used in my previous cars, but this time, the Motorcycle is a MONKEY125 with a License Plate.
I am considering to cut the bracket a little and weld it, but the welded part will pick up vibration.
I'm thinking about it because I'm worried that it might break! If possible, it would be nice if the lineup could include one with a bracket that matches the size of the 125cc Nan Bar.
View detail
Plating section is Material:Plastic and cheap….
[How is it used?
I bought it to put a reflector next to the headlight to make it look like an old car.
Was the one you received as per Image?
The base part of the plating is made of Material:The large size is about 50mm in diameter, which I think is a good size.
Was the installation difficult?
The M6 Screw was long, so we cut 5mm off and used it.
How was your experience with it?
I am glad I purchased it because it gives off a cheap but good atmosphere.
Durability will be verified in the future.
[Included Parts:were they on?
Rubber cushion for fork mounting is included.
[Was there anything that disappointed you?
Plating part is Material:Plastic and cheap point. (It is actually cheap, but …)
Reproduct such as ▼BRC seems to be a little small in large size, but the foundation is Material:It seems to be Aluminum, so it is difficult to obtain the OEM equivalent.
View detail
Moderately
The threaded part is wobbly and not of very good quality.
I can't complain because of the low price, but it is not something I would confidently recommend to others.
View detail
Not luxurious, but works fine.
tawdry A "normal with Reflector's Number stand. A few more details to be worked out.
I was happy if the design was solid and good looking.
View detail
Cool, easy to install, highly recommended!
I bought this kit at the same time I installed the Fender Eliminator Kit on my Grom jc75, and it is simple and cool. I was not happy with the 1cm gap between the License Plate and the Reflector, so I had to modify it to fit the gap. It is good to use the ready-made one as it is, but I like to fine-tune it and make it more to my liking. I can recommend this product. View detail
Reflector angle needed to be adjusted
It is made to fit the TitaniumPlateHolder made by k-factory, so the fit is Exactly.
However, the angle of the reflector after installation was such that it was worshipped at the bottom. (Since the License Plate is co-tightened, the angle is naturally determined by the License Plate angle on the body side.) 。
After much consideration, the angle of the Bracket in question is angled. (Folded part) The angle was adjusted by tapping the Finally, the angle was just right.
Also, the part where the reflector attaches (Bracket part) I also thought that the bracket could be hidden when a slim-type reflector is installed if the dimensions of the "1" were made a little smaller.
I have diverted the OEMReflector so the Bracket is hidden and not visible.
View detail
Mounting holes are perfect.
Fender Eliminator was converted to Fender Eliminator and a Reflector was added.
It is cheaper than other companies' products and the reflector itself reflects well.
I was worried about the mounting holes because of the low price, but the Number was installed without any problems.
View detail
Not without this.
Be aware that the absence of a Reflector is a violation when installing the Fender Eliminator Kit!
Shape and rigidity seem to be fine.
View detail
It was cheap and was able to use.
It was cheap and was able to use. View detail
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased. He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divi
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased.
He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divided into six.
Although 1 cmx5? of the divided parts was small, the space to stick was not located at the place as for which the number plate was vacant.
Therefore, he plans to create and attach the pedestal for sticking a reflector to a number plate by his original work.
View detail
I think kana a little weak in reinforcement.
I think kana a little weak in reinforcement. View detail
For some reason, it's not reflective.
I attached it to a post in the garage of my house.
Is the product at a narrow angle to reflect? Is the angle at which it is applied bad? It is not reflective at night.
View detail
Because if you don't, you will be caught.
I bought it because I wanted a thin one. View detail
Stylish
[How is it used?
I used it on my XJR1300C. I'm running it with a Rizoma Fender Eliminator Kit.
The Reflector that originally came with it was too large, and I started to feel uncomfortable, so I replaced it this time.
Was the one you received as per Image?
The image is generally correct. However, I feel that the angle of the bend of Reflector is a little too strong.
It would be nice to have a few different angle options like the ones made by DAYTONA.
Was the installation difficult?
All you have to do is loosen the two License Plate Bolts, insert them, and tighten them together, so it's not difficult.
Depending on the combination with the Fender Eliminator, the length of the Bolt may be insufficient.
The thickness of this product is roughly 2mm to 3mm. If the length of the Bolt is about Exactly as it is now.
It is recommended to use Screw lock to tighten or replace with a slightly longer Bolt.
How was your experience with it?
The look is certainly cleaner and more Stylish, so it has served its original purpose.
[Included Parts:were they on?
There is none. Everything was as shown in the product images.
[Was there anything that disappointed you?
I thought the angle was a little too tight for my Motorcycle Fender Eliminator.
DAYTONA's Reflector has a few different angles to choose from, so in some cases this may be a better choice.
I chose the Active product this time because the design of the Reflector itself was sharp and had design characteristics.
View detail
My bad!
I am ashamed to say that I bought this product without checking the fitment and dimensions carefully. Why I didn't check it properly....
There is no problem at all as for the quality of the adhesion of the reflective material which was a little uneasy for the price, and there is no peeling of the paint.
The dimensions didn't match, but I was able to adjust them by offsetting with a cheap bracket from Home center, so that's good! Be sure to check the measurements! (naturally)
View detail
Slim and GOOD!
I bought this for my 250 Husk.
Just fit.
View detail
It's not too obvious.
The company's Fender Eliminator and License PlateBlinker have been added.
The reason I chose this shape is because it is inconspicuous.
Looking at other people's installation images, you can see that between Reflector and License Plate
There was a gap between the two, so I had to make sure there was no adjustment range to eliminate the gap.
I was worried about it, but it was good that there was a way to adjust up and down on the screw holes for mounting.
The truth is, even if I didn't have this product, I'd still buy Blinker's Plate or
I wish Fender Eliminator had a Space for Reflector.
View detail
I can recommend this product as a fairly satisfactory one.
I installed it because the Reflector is gone with Fender Eliminator.
Although a similar one from Active has come out, but I did not find one for 125, because Size is bad for Large and Parenthesis, I made DAYTONA.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
That's normal.
It's different from the OEM Stanley, so it has just a little bit of rattling, but it's very effective as a dress-up because you can choose your color etc. View detail
Fits: HONDA Dax 70, HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Dax 70, HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Dax 70, HONDA dachshund
It came on nicely.
It was a nice fit.
But unfortunately, the Cable clip
The mounting holes should be on the Left Side.
But for some reason it is still on the Right Side.
Why?
View detail