Reviews
To Fender Eliminator Kit
It's a little out there.
To Fender Eliminatorize the Monki 125.
Used.
To SSKFender Eliminator Kit
License PlateFrame by DAYTONA
I tried to install the
I bought it in a hurry because I couldn't install it.
It's Limit, but I was able to install it.
I'm relieved.
View detail
Fits: Others Medium size car and over (126cc-)
The large size of the Reflector is not too large and looks good.
Simultaneous installation with Fender Eliminator made by HURRICANE.
I bought this one compared to the Reflector only product, and it looks good from the Reverse side, and I'm glad that the back of the Number is covered so it doesn't get dirty along with the strength.
Even the NORMAL Fender was covered in mud behind the Number, so it will be easy to wash and clean the car.
Reflector is not so good at attaching Double-sided Tape, but I think it's large and strong because 3M is quite firm.
View detail
Reflector is thin and good
Used with MONKEY125 along with their Fender Eliminator Kit.
It doesn't stick out from Number and Reflector is thin and neat.
It would be even better if it was bundled with the Fender Eliminator Kit.
View detail
Fits: Others Medium size car and over (126cc-)
It is not cosy, but it is safe to have.
I bought it on the occasion of converting my '14 MC41 CBR250R late model to Fender Eliminator.
The Fender Eliminator does not come with a reflector, so I chose this one.
I compared and examined with Active's Slim type Reflector of the number co-closing type, but I decided to buy this product also to reinforce the license plate which becomes bare by making it into Fender Eliminator.
The content of the packing is only Reflector of Number base and Paste Type. This price is just this …hmmm ….
But it is light and sturdy, and the texture is good and the anodized is applied beautifully.
As raised in the image, the interval between the Number base and the fixed claw is too narrow and the raised part of the edge of the Number does not enter at all. Moreover, Quantity:Pair (for Left and Right) And.
In case you're wondering, the Number was re-registered late last year and is still a beauty with no freshly made distortions whatsoever.
If I forced it in, the Number was going to be deformed, so I agitated the claws while paying close attention to the anodized peel and looking for the best position where the Number can be fixed and not rattle.
The position of the Reflector can be pasted to the top and bottom because there is room, but I wanted a sense of unity with the Number, so I pasted it to the RLimit of the upper bend part.
Once the position of the Reflector is decided, carefully pull the peeled paper downward while holding the Reflector so that it does not gap.
I installed it with that in mind, and it looks very GOOD.
Up and down Quantity:Pair (for Left and Right) Because both plates are exposed about 1mm more than the License Plate edge, it makes the Number seem to be high class.
Incidentally, for the above reason, Quantity:Pair (for Left and Right) NumberSIDEBlinkerCompact of the Active manufacture which was anxious whether it interfered and could be used together was possible to be used together without interference.
Personally, I'm not dissatisfied with it, but I think it would be more stylish if the Reflector mounting part was the same size as the Reflector. It's a bit expensive.
Well, I think it's unavoidable because I think the Base part is used with other Reflector size products, but…
Also, the aforementioned claw problem. If it is a cheap price, I think it is unavoidable, but if it is this price, I want it to be done properly.
If you're worried about tripping and bending the Number with the Fender Eliminator, buy this one for the Reflector as well!
View detail
Good shape
Used in MONKEY125.
It's not very noticeable and I'm happy with it.
View detail
Fits: Others Medium size car and over (126cc-)
It's neither good nor bad
I bought it to install a Fender Eliminator I think that there is no large difference between the price and the build etc. with other Manufacturer's ones However, I am a little anxious about the fact that the Reflector is a double-sided tape Nah View detail
Fits: Others Medium size car and over (126cc-)
It is slightly expensive, but ...
As we are attaching the Rear Fender Eliminator Kit with Off-road motorcycle
Gravel and mud come straight on the License Plate.
Indentations such as numbers disturb and cleaning is not easy either.
I did not turn down and bend, but I think that I will fold someday
I searched for something, I arrived at this product.
It is not related to running, not too much concern such as number back
However, as it is a License Plate that seems to bend only a bit caught
There is no loss when attached.
However ? ? ? It is slightly expensive.
View detail
Fits: Others Medium size car and over (126cc-)
If you are concerned about the dirt on the back of the License Plate!
Purchased with Fender Eliminator Kit installation.
When I installed the Fender Eliminator Kit, I purchased this item because the back of Number is visible..
The dirt became inconspicuous and the car wash became easier
There is also a nail that fixes Number under Plate, so there is no beating sound even if it runs.
I feel dissatisfied with the attached Reflector shovel
I think that it may be a little bigger
It is too cool between Number and Reflector.
I think that surprising is good.
View detail
Fits: Others Medium size car and over (126cc-)
Light than a certain product
At first, I used KIJIMA's License Plate Base, but Material : Aluminum, but with a considerable weight feeling, vibration was intense with Number unless you used Double - sided Tape etc between License Plate and Base for installation.
With Reflector I never knew that there was something I did not know because I purchased it, but I have been using it unfortunately, but I can not stand the adhesion of License Plate anyhow, buy it here.
Compared to KIJIMA, the thickness of Plate itself is thin and it is really light.
In any case, there is a nail that receives the lower part of the License Plate, and it firmly adheres. Especially Large seems to be durable without measures against vibration.
A double-sided tape is affixed to the attached Reflector, and it will be attached to Base by oneself.
Because it is thinner than KIJIMA, folding etc.. I am worried, but I think that it is stronger than License Plate, so it is acceptable range. Number Unevenness on the back has decreased, it is refreshing and cleaning is easy.
I wish it was a bit cheaper ...
View detail
Fits: Others Medium size car and over (126cc-)
Buy with Fender Eliminator
It is purchased simultaneously with Fender Eliminator Kit.
With ReflectorSingle Body, when you look from behind,
As you can see the vertical Plate Holder is better.
Reflector is also attached and is good.
View detail
Fits: Others Medium size car and over (126cc-)
HURRICANE Number base&ReflectorW122
I installed it simultaneously with Fender Eliminator.
Although the Reverse side of the License Plate is considerably dirty when washing cars when traveling, it is troublesome
This Number base is a flat surface with double sided Black Painting, so it is easy for dirt to fall off. There is also the thickness of Base there so there are likely to protect the License Plate firmly.
Although it is the attached Reflector, EMark is not specified, so there is a possibility of vehicle inspection ineffective. I installed DAYTONA made EMark attachment, but I think that it is necessary to pay attention when purchasing is considered.
I think that overall good Cost performance is a good product.
View detail