Reviews
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
For Motorcycle Dress-up
I bought this for my Monster1200S dress-up
Design, in exchange for NORMAL's bare black plastic parts The quality is high in both textures
There is no problem with the accuracy of the installation of the product, but there is a slight driven sprocket in the design I'm a little concerned about the chain oil splashing around my feet because of the exposure
View detail
Refreshing and Parenthesis improved
The purpose of buying this Sprocket cover is to buy and install Oil cooler of Boa Ace later. But my SR is equipped with Y's GEAR's Power Beam so I seemed to interfere with Power Beam's Bracket and Oil cooler so I gave up installing Oil cooler. Unlike NORMAL's Sprocket cover, it looked very refreshing, Sprocket and Chain were visible from the gap, and Parenthesis improved.. View detail
Looks good
NORMAL's Material : Compared to Plastic
I think I got better..
Installation can be easily done to anyone in about ten minutes.
If the price was a bit cheaper, it was better!
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover with clutch piston base
Finished product of high quality, excellent material and precise in the dimensions. Easy to assemble and functional in its use. Finished product of high quality, excellent material and precise in the dimensions. Easy assembly and functional in its use. (Translated by google translation) View detail
Shift mistake prevention, Shift touch improvement effect Large?
Aluminum Cut-out Sprocket cover
Shift accuracy is improved because Seal bearing is adopted for Change shaft part.
Since OEMCover is not using Bearing, the hole of Change shaft deforms due to aged deterioration and Shift miss comes out.
I think Shift mistakes will decrease and it will also protect GEAR.
By the way, my vehicle was already prepared to withdraw from GEAR, but before the exchange I got Shift mistake.
In addition, OEM 2. Lighter and lighter as 4 kg ~ 800 g approx..
Same with Manufacturer, Light touchClutch
If you have Black Anodized or Color, are you grateful?
View detail
The shape is satisfying!
I hope to include making using nerve to detail.
It is unfortunate that there is unevenness on the edge part of the outer circumference of the back side, I think that it is better to chamfer the back side.
There is a return in chamfer of mounting hole.
I got lost my purchase because the price is high, but I purchased the shape.
If every detail is beautiful it is a perfect score!
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R
Does not fit WR250R
The case saver does not Fit the WR250R. Holes cannot be aligned and unable to mount. ☹️ I'm using a 14t sprockets and the case saver is unable to fit in. Wasted my $$ on this View detail
Depends on environment and subjectivity
Drive sprocket Since it seems that cleaning around it will be easier, purchase.
Results gave up at the end of installation.
Interfere with Rear Sets with ShiftLink Rod.
It seems that there is compatibility outside OEMShift Pedal.
Shift pattern It is not Japanese Vehicle Inspection Correspondence because there is no stamp and Seal attachment.
Personally, I abandon this point in Minus.
There is no cutting BALI, hole position is no problem.
I think accuracy is good.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
It is good.
I changed my OEM's heavy looking appearance. It looks really sharp. I do not care much about dirt.
Wiring kind will be exposed so it may be better to protect with Col Gate etc..
View detail
Awesome red!
Wanted to change the ugly plastic stock drive cover that came with the bike so i decided with the red Zeta drive cover to compliment the other parts. I was very happy with the item. Very high quality. Definitely not 'toy' looking. The red color is chrome red. The silver accent is amazing. Item comes with all the parts needed but you will still need to reuse the old drive cover steel plate. View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
POSH SPROCKET COVER
Very happy with Webike Japan and Posh, this sprocket cover is the third Posh item I have brought so far, I also have the Posh slim indicators as well as the Posh tail light. All items have meet my expectations, the Posh sprocket cover was easy to fit looks great and saves weight. View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Custom feeling highest!
Large diameter Replaced for Clutch release for replacement.
It is inexpensive, but it is not inferior to any other expensive product.
In addition, there is also a sense of security because the shape covers the entire Sprocket.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Almost as expected.
Purchased for the purpose of improving convenience of ChainMaintenance.
Around FSprocket, removal becomes easy as expected and cleaning etc.. It became easier to do.
As I imagined seeing the product photo, Left's knee under the foot will become dirty.
Installation is not difficult but because there are many colors,
It may be a little troublesome when doing OH of Clutch release.
I think regret is the product and price Balance.
View detail
Very Clean and factory looking part. Fits perfectly with all the hardware supplied. Helps to prevent the wiring from moving around.
Very Clean and factory looking part. Fits perfectly with all the hardware supplied. Helps to prevent the wiring from moving around. View detail
This thing is great in the flesh. Very nice machine work. Fits 100% perfectly. Retain the speedometer while having that racer open sprocket look. Provides some level of foot protection from the front sprocket. Really is a good looking custom upgrad
This thing is great in the flesh. Very nice machine work. Fits 100% perfectly. Retain the speedometer while having that racer open sprocket look. Provides some level of foot protection from the front sprocket. Really is a good looking custom upgrade. View detail
Posh sprocket cover has definitely met all expectations.apart from its posh finishing, if it's perfectly on my cb400.with this,it definitely makes cleaning the Chain much easier as all the hidden gum can be removed now without having the hassle to remove
Posh sprocket cover has definitely met all expectations.apart from its posh finishing, if it's perfectly on my cb400.with this,it definitely makes cleaning the Chain much easier as all the hidden gum can be removed now without having the hassle to remove the gear lever. It also give more clearance to my samco hoses as the original cover tends to compress the hoses. Although the price is steep however for the longevity of the chain and the aesthetic reason definitely make this product worthy View detail
It's beautiful Red
Normal sprocket cover interfered the other day when I installed the Frame guard, so I was pressed for necessity but I am satisfied that the coloring was also beautiful and the texture was unexpected.
Oh, one more bonsai has advanced. (Lol)
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Impact is good
Although there is almost no functionality, I think that the appearance performance is good. I have been running only once since installation (800 K per night for 2 nights) Because durability is unknown, I think that it is not a consumable item, so I think Large is durable. View detail
Design is Parenthesis!
Since ZETA likes Large, I purchased this Parts of course.
Installation is very simple as removing OEMParts and just reattaching in the same way.
I can see the place I could not see until now, I think Red of this Parts is also very Parenthesis.
It is more Parenthesis than the performance!
View detail
Fits: DUCATI Scrambler Urban Enduro, DUCATI Scrambler Sixty2, DUCATI Scrambler Icon, DUCATI Scrambler Full Throttle, DUCATI Scrambler Classic, DUCATI STREETFIGHTER848, DUCATI SS900, DUCATI SS800, DUCATI SS750, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI Monster S4, DUCATI MONSTER900, DUCATI MONSTER800, DUCATI MONSTER796, DUCATI MONSTER750, DUCATI MONSTER696, DUCATI MONSTER695
It was different from Image
In my anticipation image I thought whether the circle part of the product overlapped with the Sprocket.
I installed it, it is far from Image and I regret a bit ...
If possible attaching image etc. etc. Would have been there if there was one.
View detail