Reviews
Hole plugging!
Regardless, it is just a Bonsai Parts to fill the Screw hole!
But, well, I wanted to add some Blue color to it, so I went out and spent it....
View detail
Bolt hole concealment
When the tandem footpeg of the CT125 is removed, the bolt holes are exposed, and if water or other substances get into the holes, they can cause rust. View detail
While you are shopping
It is just a decoration, if you like.
There is no sense of discomfort as if it had been attached from the beginning.
It is completely self-satisfying because no one but the person himself notices it.
View detail
When was the last time you dropped out of a replenishment?
I bought these caps because the caps on my Handlebar Clamp Bolt had fallen off before I knew it, and the price is great for a pack of 12. View detail
Screwfor Hole
I didn't check it carefully, but it seems to be an M8 Screwfor Hole, not a product for filling a hole of M8Size. So the body is around M6 size.
It does not appear to fill the M8Size hole.
View detail
It would be nice to have a Type without Luster.
[How is it used?
TZr250R (3XV) I was concerned about the bare cap bolt on the Stem of the "Stem" so I bought it to put a lid on it.
I thought about using KITACOConvenienceParts, but I chose HURRICANE because it is a PRO around the handlebar and there were more of them.
Was the one you received as per Image?
1Quantity firmly as shown in the picture:It was 1 Set of 2pcs.
Was the installation difficult?
It can be installed in about 3 seconds as it just fits into the Bolt's head.
How was your experience with it?
As you can see in the photo, it is quite shiny, so it stands out a bit. (Lol)
Well, it can't be helped that it is probably intended for use in the bar Handlebar Post.
I'll try to get rid of the luster by easing it off a bit when I have time.
[Included Parts:were they on?
Cap only.
The bags are of a type that cannot be sealed, so it would be nice to have a Zip lock, etc. for storage.
[Was there anything that disappointed you?
Not really!
【Review】
It prevents Bolt from rusting and dirt from accumulating.
It is good for those who use it in such areas because of its gloss.
Also, since there are quite a few caps in the box, I will use them for cap bolt in places I am interested in.
View detail
It is good.
It is good. View detail
HURRICANE Hole Plug
About quality and texture - Top quality. Textured surface finish on the black plastic plug and is of a strong construction allowing removal and reinstallation if required. About the feeling of use - After I removed the belt drive guards from my Buell, the exposed mounting holes looked terrible. These hole plugs from Hurricane were a perfect solution to that problem. Products to buy together - If you are also using bar end mirrors, Hurricane offer these hole plugs in various sizes to suit the OEM mirror mount points to give your bar end mirror installation that professional finish. Difficulty of installation - Very easy to install these hole plug. Just be sure the hole is clear of any debris prior and press the plug firmly all the way in. Cost performance and comparison with other products - They are a very basic part and the price from Hurricane matches that perfectly. There are other CNC machined hole plugs available from other brands at a higher cost but for me the plastic hole plug was the best option. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If Hurricane does not have the correct size for your intended hole just go 1 size smaller and add some silastic sealant to secure it in place. View detail
For M8 is a little different?
First of all, please note that this is not a product for attaching to the hex holes of the Cap bolt. Do not blame the Manufacturer if you misunderstand the usage of this product.
I thought about what to do with the Screw holes that I had left partially visible and neglected, and remembered that there was also For M6 in the product I had bought to plug the M8 holes.
If you pick it up and compare the two, you will see that the texture of the head is different for some reason (minor change?), but the basic structure is the same. However, when you try to use them, the feel is slightly different.
The M8 for M8 is small and fits into the hole very well, whereas the M8 for M8 is not so responsive. The M8 for M8 has a head that fits tightly against the Exactly and fills the hole without gaps, making it difficult to remove, while the M8 for M8 has a slight rattle and can be removed by inserting a nail and pulling hard. I wonder if it is due to the difference in Screw Pitch.
View detail
I use it to prevent Rust in Screw holes.
I use this product to cover up the screw threads and to prevent rust. It is cheap to cover and comes off easily, so I now have a Habit to inspect it from time to time! View detail
Just put it on the existing bolt and dress-up!
This product is easy to dress-up just by putting it on the existing bolt, and it is easy to use if your Motorcycle has a black engine! View detail
Tiny but unobtrusive.
The M10 Screw mounting hole for the Stand Hook on the Swing Arm of the ZrX1200 DAEG is not used in the future, so I installed this Hole Plug. Is it really for M10Screw because it is unexpectedly small? I thought it would work, but it fit perfectly (laughs).
Pushing and rocking so you won't get blown away. Black resin, unobtrusive and Good.
View detail
HURRICANE, are you serious?
[How is it used?
I purchased this product to prevent Trouble such as rust by plugging the hole in the Cap bolt.
Was the one you received as per Image?
When I picked up the product, my impression was that it would be easy to install by simply inserting it into the hole. Until this time, .....
Was the installation difficult?
As it turns out, it cannot be installed!
The depth of the hole in the cap bolt is 3mm, but the length of the hole plug (the part that fits in the hole) is 4.5mm! I was going to install it on my FZS600, but I suspected that the cap bolt used on Yamaha cars is special, so I decided to install it on another Motorcycle I own, KawasakiD Tracker, SEA BASSRGV250, and SEA BASS RGV250, and I was not sure if the cap bolt used on Yamaha cars is special or not. I tried with the bolt used in the MOTO GUZZIV11LE MANS, but I still couldn't install them all!
How was your experience with it?
3 Pack total 1Quantity:2pc. After much consideration, I decided to shorten the length of the set and use it. However, if I cut it down, the two stoppers attached to the lower part of the neck would be lost, and if I simply set it in the hole, the Hole Plug would fly away due to vibration and wind pressure. The decision was made to adhere them together using the This bond is flexible even after curing, so the Hole Plug can be removed later.
I first thought about doing the shortening process manually, but the quirkiness 1Quantity:2pc. I used my Belt Thunder power tool because I had a GSX400E to do the set as well. With this tool, it is easy to shave in an instant. But I had to be careful not to shave too much.
[Included Parts:were they on?
There is no such thing.
[Was there anything that disappointed you?
It's super disappointing because it's useless as it is!
Other items that would be helpful
Opinion or request to Manufacturer:Mr. HURRICANE, if you sell products like this, you will lose credibility!
View detail
Purchased to prevent rain puddle on Cap bolt.
I bought this to prevent rain and car wash water from collecting on the Cap bolt that faces the sky.
Installation is good by fitting and lightly tapping with a rubber hammer.
View detail
It's just a plastic Cap.
It's just a plastic cap, like the title says.
It is probably the same model as the one included in the HURRICANE Pipe Handlebar KIT in Black.
This time I used it on a Bolt that was dyed black on Stainless Steel, but it was too tight!
I accidentally got a Wound on the butt of a Penetrating Minus.
View detail
Dress-up made easy
I bought this as a Cap for Fixing MirrorBolt.
I'm glad I put it on because every time it rains, the hexagonal hole part used to be a puddle of water.
Installation is also super easy, just lightly hammer in with a plastic hammer etc.
View detail
Ideal for covering up holes, but difficult to remove.
It is used for the screw hole of Plate which is exposed with footpeg position change. Because this is much cheaper than hiding with an ordinary Bolt, and the appearance seems to be good, I tried it.
The diameter of the head is almost the same as the screw hole and it is very neat. The protrusion on the side goes in easily in the inserting direction, and there is no need to worry about it coming off due to vibration as it is designed to catch on the screw thread in the pulling direction.
After that, the footpeg was finally installed in the same position as the original and this Cap was no longer needed, so I tried to remove it, but this time I had a problem. However, the Slotted screwdriver was not able to be put in at all because of the Smallness of the head diameter and the adhesiveness.
Fortunately, the hole I used is penetrating, so I was able to push it in with a driver and pull it out from the back. If the hole is non-Penetrating, you will need to drill a hole with a drill bit and cut it out with a cutter, etc.
Before you use it, you should really think about whether it's strong enough to cover it up and Large before you use it.
View detail
Damn it!
I bought it for the Mirror Hole Cover and it is much smaller than I thought it would be
When I first saw it, I thought it was either the diameter of the hole or the Bolt cap, but it's smaller than the Image is
It went in the screw hole of the M10 tightly, but the spit? I have no complaints if the outer diameter of the
It's returned, so it doesn't look like it was left out at all
View detail
It is only looks
I closed the M6Screw hole that I do not use.
Garbageetc. Although it can prevent invasion, since it is Pura Cap, since water enters, water gathers inside when it gets wet, there is a possibility that it becomes easy to rust on the contrary.
There is not much need, but please to prevent Garbage clogging.
View detail
Unnecessary Screw filling up
I removed the Left Side Mirror for commuting Scooter as it gets in the way because it slips through the traffic jam, but I tried using it for filling in the remaining M8Screw hole. It has a burr and is plugged into the Screw mountain when inserting it so that it can not be taken easily. I think that it is very convenient because it helps to protect Screw holes which are no longer used.
However, it is slightly troublesome as the head is Small when you remove it.
View detail