DAYTONA Motorcycle Reverse-Bracket Reviews

Filter

Write a review and get Webike Points!

Reviews

DAYTONA

15 Jan 2024

Slant License Plate Bracket

Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S

Japanese Webike user

5/5

I was finally able to correct the angle to a safe one.

[How is it used?
When the Japan number was installed on the number mounting bracket of the KTM390DUKEOEM, the red reflector was facing downward, and the reflector did not reflect the light from behind at night, thus compromising safety.

Was the one you received as per Image?
I thought I have seen similar shaped Bracket in OEM Parts for domestic cars (lol).

Was the installation difficult?
The mounting holes on the vehicle body side and the holes on the Slant License Bracket side were not aligned slightly, so the holes on the Bracket side were cut off by about 2mm on the one side with a file to make an ellipse to align them. To prevent the Bracket from coming off due to vibration, I used a type of nut with a loosening stop.

How was your experience with it?
The 20-degree tilt angle is perfectly matched to make the reflector's reflective surface perpendicular and reflect light well at night.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation point and hang:When diverting the product to a car other than the compatible model, it is recommended to measure the angle of the installation part with a protractor in advance to avoid mistakes. View detail

DAYTONA

06 Nov 2023

Slant License Plate Bracket

Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125

Japanese Webike user

5/5

Just the right angle

The angle is just right, without being obtrusive.
The cost is a bit high, so I gave it a 4 for cost performance. View detail

DAYTONA

02 Nov 2023

Slant License Plate Bracket

Japanese Webike user

5/5

It's a good feeling

I saw my friend's Motorcycle and… Number angle is different! I thought ….
Myself too! And … Choyage has been good... ♪
A little customization can change the impression of Motorcycle!
Recommendation
However, since the Number mounting is Bolt-do→Nut-do
If you are BoltCustom, please be careful.
(since they will no longer be using Bolt) View detail

DAYTONA

07 Oct 2023

Slant License Plate Bracket

Japanese Webike user

5/5

It's still good

I have repurchased this product because I have added a Motorcycle to my fleet.

The license plate attached to the rear fender was not a good parenthesis, so we installed it.

I have installed the same product on a motorcycle that I have owned for some time and have no durability issues.

Fender Eliminator is good, but the motorcycle I use to commute to work gets a lot of mud splatter when it rains (I've experienced it).

I think this would look great. View detail

DAYTONA

19 Jul 2023

Slant License Plate Bracket

Japanese Webike user

5/5

YZF-R1 (2016) for use in

It was easy to install and I am very pleased with how it turned out, just as I expected. View detail

DAYTONA

13 Jul 2023

Slant License Plate Bracket

Japanese Webike user

4/5

Easy angle change

Purchased to add a little angle to the License Plate.
The angle cannot be adjusted.
The Bolt through which the License Plate passes is directly attached, so it is not suitable for those who are decorating with Bolt, etc. View detail

DAYTONA

17 Jun 2023

Slant License Plate Bracket

Japanese Webike user

4/5

Easy angle change

The number angle of the latest Fender Eliminator Kit is a little bit docile. The angle of my Motorcycle was not enough, so I used this parts to adjust the angle.
They are easily detachable, so they can be adapted to TPO.
It is easy and good IdeasParts. View detail

DAYTONA

19 Dec 2022

Slant License Plate Bracket

Japanese Webike user

5/5

Effective

Installed on a PCX125.

I bought this one because the License Plate attached to the Rear Fender was not a good parenthesis.

I am satisfied with the product as per the Image.

I have been using it for about 4 years now and it is non-trouble.

I think it is an affordable price to change the atmosphere a bit. View detail

DAYTONA

09 Dec 2022

Slant License Plate Bracket

Japanese Webike user

5/5

Made of sturdy steel! Just the right angle!

This is a real Commendation! I've already uploaded pictures of the installation.
"angle" I've added a picture because I don't think there are enough pictures of Really. Just the right angle."
It's a great idea! Also, it's made of steel, so it's durable.

stingy Material:It is better to use Stainless Steel's Universal Bracket to raise the angle of the License Plate than to use the Stainless Steel's Universal Bracket to raise the angle of the License Plate.
This product is more durable and most importantly, it absolutely looks better, so RECOMMENDATION!!!! View detail

DAYTONA

10 Oct 2022

Slanted-Number Bracket

Japanese Webike user

2/5

limited edition car model

Use outside of conformity at your own risk. As a result, it was not usable at all.
The problem is my own judgment, and the Manufacturer is not at fault in any way, since I am using a car model other than the compatible one.
Since it is made of bent steel plate, it is less likely to break unlike aluminum ones. View detail

DAYTONA

27 Mar 2022

Slant License Plate Bracket

Japanese Webike user

5/5

A little bit to Mischief!

What made you decide to buy?
My 6R I installed Active's Fender Eliminator Kit last year. The Fender Eliminator Kit is designed to meet the new standards for the first year, so the Number angle is a little Large…Number angle is a little Mischief style when you want to DAYTONA.:I came across Slant License Bracket. (Lol) This Slant License Bracket is applicable to PCX, FORZA, and Address. 125. However, the images and impressions posted by users who have installed the product on other models were very helpful and led me to purchase the product.

How was your experience with it?
As expected. The number from the back is not at an angle where you can't see it from the back like the Mischief people, but I think it fits at an angle where you can see it from the back as well. I think it's OK for me, but … that's your own responsibility.
If you are considering purchasing the Slant License Bracket, it has an angle of about 25 degrees. Fender shape to be installed (OEM or Other Brand Product) I think the angle will change with Installation is at your own risk.

[Others]
The number attachment pitch is 12, which can be attached to 125cc to liter machines. The body is compact but solid, and bolt is welded to fix Fender and Number. The following is an example. This welded bolt is about 13-14mm on the Fender side and about 1mm on the Number side. Please be careful when installing the product. The difference in length can be seen visually, and a cap nut and washer are attached to the number side when the unit is packaged.

From here, Active installed in 6R.:If you have installed the Slant License Bracket, you can install the License Plate Light and Number with Limit.:The installation had to be done while successfully crossing the License Plate Light before setting. Also, with the NumberCover in place, it was thicker and I felt that the nut was not tight enough, so I removed the NumberCover and installed it this time. I felt that the parenthesis was more Refreshing and better without the NumberCover. (Lol)
I think it is necessary to check to make sure that it does not come off due to driving vibration when it is last driven. If you drop the number without knowing it when you drive a long distance or drive at high speed, … it is necessary to check it. In my case, the Fender side is tightened with a nut with a loosening stop. View detail

DAYTONA

26 Jan 2022

Slant License Plate Bracket

Japanese Webike user

4/5

sturdy

It is very strong, but although it is painted, it rusts easily. I also bought a Plate Holder because if you attach a number to this bracket alone, the number will easily bend if it gets caught or hit by something. View detail

DAYTONA

18 Oct 2021

Slant License Plate Bracket

Japanese Webike user

4/5

Easy angle change

[How is it used?
I have a YZF-R1 with a Fender Eliminator, but I was concerned about the angle and bought this product that suddenly caught my eye.
It is not in the compatible car models, but of course the License Plate is the same size, so there was no problem about the installation.

Was the one you received as per Image?
It's a DAYTONA product, so the quality is solid.
Nut for installation is also included and helpful.

How was your experience with it?
It only takes a few minutes to install.
I have a DAYTONA Dr-Recorder, but I was able to use it by just replacing it without having to relocate it.
When I installed it, the angle of the Number itself was exactly what I was expecting, and I am satisfied with the product.
But this is completely a matter of personal taste now. "There's something not quite right about it. I'm worried that I'm going to get a lot of laughs.
It is very difficult to understand the difference between these parts without installing them on the actual car.
If I don't feel any discomfort after using it for a while, I'll leave it as is.

How did it compare to other products?
I compared it with a very small bracket from a certain large hand ShoppingSite.
I chose this product because I could only see a future where it would obviously be Garbage and I could expect it to be of good quality.

【Review】
You can change the angle of the License Plate by DIY, but it is not possible to change the Quantity:Pair (for Left and Right) If you use Universal Product, you may get Rose Tsuki. (And at a reasonable price.) I'm grateful for the solution.
If you want to use it for other car models, you should check if it is large enough to be legal. View detail

DAYTONA

23 Mar 2019

Slanted-Number Bracket

Japan User(translated)

5/5

A little RearMakeover!

Purchased in conjunction with the relocation of NumberSlate to a reflector position above the existing position It was
The reflector part is processed vertically in the middle of a slanted rear fender, so this product is not I did some small work on the Rear Fender side as it is, and bought the Reflector that I bought at the same time I installed it with the kit
The verticality of the OEM was undeniable, but I personally felt that the Refreshing was more cohesive We are self-satisfied View detail

DAYTONA

23 Jan 2019

Slanted-Number Bracket

Japan User(translated)

5/5

Impressions!

I wanted to change the look of the standard spec I bought it with the Reflector kit StylishType
The company has an exclusive version for each model of car, but the standard spec. reflector is removed I wanted to install it, so I fitted it, and I wanted another 10 degrees of slope I used rubber plates to increase the slope of the addition, but this was a poorly thought out addition We are honestly satisfied View detail

DAYTONA

02 Jun 2018

Slant License Plate Bracket

Japan User(translated)

2/5

Can not be installed

I thought about installing it on Fender Eliminator on another vehicle but I could not install it without clearance with License Plate Light

View detail

DAYTONA

23 May 2018

Slanted-Number Bracket

Japan User(translated)

4/5

Rise moderately

Although it is the order to fix Number to Bracket after attaching Bracket to the car body formally
Level that it is very painful for the thick fingers because of the narrow gap.
Even my own finger was much Large strange.

However, once installed it will be at a moderate bounce angle
Not feeling not too much Brown (Personal opinion) I wonder if it is OK. View detail

DAYTONA

12 Feb 2018

Slanted-Number Bracket

Japan User(translated)

5/5

Used with ZrX1200R

Motorcycle I bought in second hand was Fender Eliminator but because it was removed
License Plate Bracket is required and purchased here.
I will add Exactly to NORMAL's Fender.
I only have a little bit of angle to the ground. Compared to the commercially available Fender Eliminator, it is nearly at right angles at all.
I think that it is not necessarily flashy. View detail

DAYTONA

28 Oct 2017

Slanted-Number Bracket

Japan User(translated)

4/5

It will be such a thing

Because you can not install with the License Plate Holder attached (If it is impossible, Large is durable) I removed the Holder and worn it.

It's angular and it's not unlimited, is not it.

View detail

DAYTONA

09 Sep 2017

Slant License Plate Bracket

Japan User(translated)

5/5

It is very good product of COSPA.

Put this item to cut the Rear Fender of Address and angle it to a near vertical number.
Is it because the vibration is Large in Single? Another Fender Eliminator is a strong Type that also fixes SIDE and more than double the price. Is that necessary?
Certainly, when running after installing, the number is fluttered, but if you prevent vibration from breaking out Number, you can either add Cushion between Number and Bracket or attach License Plate Holder
Is it okay.
There is no extra Bracket next to it, so I'm satisfied as I'm refreshing. View detail