Reviews
Try it with Bolt of your choice.
[How is it used?
I purchased this product to refresh the exterior fixing bolt of SEROW225WE, which has been used for more than 20 years and has become rusty and lickable.
It is a convenient Spacer that kills two birds with one stone as it is highly universal and looks good because it can be easily matched with Bolts of 12.4π or smaller in size.
Was the one you received as per Image?
Although it is treated as a separate frame from the Spacer made by DRC that I purchased before, it is useful because the design and large size are the same, so I feel no sense of discomfort.
The price is just a little bit higher than the last DRCAluminum spacer I purchased, but it is still Reasonable enough and just like the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the impression of the appearance can be changed depending on the design of the BoltHead, and it can show various faces depending on the financial power (since the price goes up and down depending on the shape and material of the BoltHead) and Sense. (Since the price goes up and down depending on the shape and material of the BoltHead) and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I really wanted to buy the Red 20-pack, but it was already discontinued, so I could only buy the 4-pack.
We would like to see the 20-packs revived as the price per unit is slightly lower.
The product itself is not disappointing as I like the look and feel of the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, as there are some people who like or dislike the color of the same Red.
Other items that would be helpful
Point and hang of installation
Since it is like a fashion color used in place of a washer when fixing a bolt, it is a simple job to use this product (Aluminum Collar) by biting it when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be Large body and Large sturdy, but Bolts with good parenthesis design are expensive, so please consult with your Wallet and get the right bolt. Please consult with your wallet.
I have attached an image of a few different Bolts that I had at home together, and I would be grateful if you could help me with something.
[Opinions and requests to Manufacturer
I strongly hope you will bring back the 20-pack.
Please continue to sell the product itself as much as possible.
View detail
Functions and looks good as a Washer.
[How is it used?
When I replaced the bolt&washer that holds the exterior of my KDX220SR with a DRC-made bolt&washer, it looked so much better that I decided to use it to hold the exterior of my SEROW250. I checked Webike and found that the product I had purchased before was no longer available.
Did you receive the item as per the Image?
And the products I purchased before. Aluminum Spacer for M6φ18 The product introduction column is in a different frame even though it has the same name as this product. I wondered if something had changed in the design, but the product I received had the same design. (I would appreciate that more.) Prices are slightly lower.
I liked the design of the Aluminum spacer I purchased last time, so the price was a little lower and the quality was similar, just like the Image product.
Was it difficult to install?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How did you like it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the appearance can be changed depending on the design of the BoltHead and the financial strength. (as the price goes up or down depending on the shape and Material of the BoltHead). and can show various faces depending on Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
Was "Included Parts:" attached?
None
Spacer made by DRC previously purchased 20 Quantities:I was disappointed that the Set version was no longer available, but this product offers 20 Quantity:Set was lineup and I was happy to buy it.
Quantity:1 Set of 4pcs. means the unit price per pc. is 211 yen, but Quantity:1 Set of 20pcs. is 181 yen, so if you can use it up, you can use the Quantity:1 Set of 20pcs. is a great value.
Were there any disappointments?
I like the look of the product and I am not disappointed with the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, since there are some people who like or dislike the color of the same Blue.
Other items that would be helpful
Point and hang of installation
This product is like a fashion color that is used in place of a washer when fixing a bolt, so it can be used when installing a cap bolt of the appropriate length to the bolt stop of the part that can be attached. (Aluminum Collar) It is a simple job to chew and use the
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is top level, so I don't think there will be any mistakes in usage.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be large body and large sturdy, but the price of the bolt with good parenthesis design is also expensive, so please consult with your Wallet to get the right bolt. Please consult with your wallet.
[Opinions and requests to Manufacturer
This timeQuantity:1 Set of 20pcs. was available, but I would appreciate it if you could bring it back as some colors are no longer available.
View detail
Black has been discontinued!
[How is it used?
The bolt that holds the exterior of the car started to rust, and I couldn't shake the feeling of disappointment after having gone to the trouble of making up the car with the Decal Kit.
Was the one you received as per Image?
The outer diameter was larger than expected and could not be used in places with a small depression, but on the other hand, the appearance of the large size could be used to disguise places where the mounting holes are gapped, so I think it was a good purchase for the right place for the right person.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when using Bolt.
How was your experience with it?
Used for other types of vehicles FUJI TUBO type. Compared to the Cap Holder, it is more like a fashionable washer that fits well with modern motorcycles.
However, the shape of the Head of the Bolt to be combined changes the look and feel of the Bolt, which is a bit troubling for middle-aged people with limited finances and Sense (the HeadDesign makes the CoolBolt very pricey...).
As for the product, the coloring of Anodized is vivid, and there is nothing to say, I am only worried about the fading caused by UV rays.
[Included Parts:were they on?
None
20Quantity at the time of purchase:4Quantity because the Set version was no longer available.:Buy the set
When I opened the product introduction page to write a review, I found 4Quantity:I was also troubled by the fact that the Set version was no longer available.
[Was there anything that disappointed you?
I like the way it looks and I buy it. As expected. It was
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
No special requirements. The outer diameter is Large, so please check if you want to install it on an exterior with a depression.
[ITEMS TO BUY TOGETHER
If the Bolt does not have a large head in M6 size, it is likely to be large body and large sturdy, but Bolts of good parenthesis design are expensive, so please consult with your wallet before you buy them. Please consult with your wallet.
[Opinions and requests to Manufacturer
Although this product is no longer available, it would be very much appreciated if another product with the same shape and color is continuously sold, so please continue to sell that product as much as possible.
View detail
Great texture and awesome looking!
As you can see from the pictures, it's very cool!
It's kind of luxurious…Motorcycle as a whole is tightened up.
Buy a Spacer in a color that matches your car's body color for a more attractive look!
Recommendation!
View detail
Unnecessary but awesome
I get more comments on the trick washers from Zeta products, Gives the bike a WORKS look.What do you say about a of washers? Necessary? No, but if you can justify the cost they're aluminum, won't corrode, look cool and are lightweight. This is an easy way to get your bike closer to that factory look without breaking the bank.. Super lightweight, perfect size for gas tank bolt, radiators, and 2 stroke exhaust mounts. I'd buy another if I had the place to put them. View detail
One of the few with Stages
I needed a Washer with Stages to attach an Aluminum Bolt, and since I couldn't find a good size, I ordered a DRCCap bolt, expecting it to be Large and sturdy.
The result was that the batch Size was Exactly.
Shroud and side cowl were fixed, dress-up and lightened.
20 pieces Quantity:It is unfortunate that Set has been discontinued.
View detail
Spare
I keep it in my toolbox at Spare. View detail
Spare
I keep it in my toolbox at Spare. View detail
No problem at all.
The GPZ900R has two oil drain bolts, so two bolts are used for one oil change.
The product comes in a 5-pack and a 50-pack, but I thought I wouldn't be able to use up the 50-pack, so I bought the 5-pack again.
If you think you will change Oil once in 6 months, it is for 1 year.
If I were selfish, I'd have a six-pack, which would be three times the amount.
No quality problems at all.
View detail
That's it. That's it!
Used for Oil replacement.
Since it is a consumable product, it is better to be cheap, and Quantity:The Set contains multiple copies, so if you make a mistake, you don't have to worry about replacing it.
View detail
Fashionable items that can be fashioned in a super-expensive way!
DRC's Spacer is in many places.
Use.
M6Taper bolt in a pack of four.
They come in handy because they can be colored!
View detail
Safe to use
I used to buy a pack of 5 in the same size as the multiple motorcycles I own
They ran out quickly, so I made a pack of 50 this time
It's very inexpensive and there's no oil bleed even if you've replaced it
You can buy them with friends and others to share
View detail
it's the best
It's a Repeater because it's very cheap and totally usable
Other Manufacturers are too expensive and this might be the right price
Next is Quantity:I am going to buy the Set of 50pcs
View detail
Aluminum spacer
There are several patterns, colors and shapes to choose from
Other Brand ProductScreen's off-color plastic washer Exchange from
The head of the torque is changed to a thin type, and washer is used here The custom feel goes up
Since it also expands the contact area, it may be effective in preventing cracking
View detail
DRCAluminum spacer
This Type:11 has the reverse side instead of the Flat
Because of the steps
When there is a large hole in the bolt compared to the M6 Bolt, or
Fine-tuning when a Bolt is a bit too long, or
When you want to float a little bit, etc
It is convenient to use at a moment's notice
View detail
Versatile Custom for Everywhere
Off-road&MOTARD at Absolute CustomManufacturer Anodized, sticking to aluminum spacer, solid and colorfast The treatment is done, and it is possible to customize in the areas that are lacking I'm very happy with it View detail
Self-satisfaction is on the rise
What made you decide to buy?
Parenthesis MyGROM casually and yet parenthesis well! I guess it's all about self-satisfaction enhancement
How was your experience with it?
The M6Aluminum taper bolts were also used in combination with the company's M6Aluminum taper bolts to install the parts It was It looks better too Also, as others have reviewed, I wonder how well Anodized can keep it up! It is
Was the installation difficult?
Easy to install! You don't need a special tool...but if the bolt to be co-tightened is special, the tooling is special too! I think it will be a Tool
View detail
It's cheap on the web
AddressV125GK7 Oil drain bolt for gasket
M10× 18.5mm (19mm on ManufacturerSite) purchased
I've used it many times and there are no oil leaks, etc
The cost performance is the best, with a little over $20.00 per piece of gold
I think it's perfect for those who ride GunGun and change oil by themselves
View detail
Consumables to be replaced at every oil change
What made you decide to buy? Affordable and cheaper than OEMs
How was your experience with it? No oil leaks
Was it difficult to install? (In the case of hard parts) Drain bolt, Quantity:Just Set
What is the point or hang of installation (for hard parts)? Any
How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? None
[Do you have any products to compare it to? OEM Parts
[Others] I removed the drain bolt to change the gear oil, but the washer was on I don't have one It looks like I forgot to put it on the last time I replaced it Still, did the Oil not leak? It's a relief to have it
View detail
Red Anodized stand out.
【What made you decide the purchase?】
I bought it because I was playing BoltCustom Motorcycle which I was riding the previous time and knew the effect.
【How was it actually used?】
DRC M6 Aluminum taper bolt and Quantity : We exchanged with Set.
As White is a Red Fender, it's Bolt & Spacer so it stands out pretty.
Shape and accuracy are also good, satisfaction is high.
【Mounting was difficult?】
Since we were measuring OEM Bolt with Caliper before purchase, it was possible to install without problems.
[Is there anything I was disappointed about?]
There is none.
Since Anodized has aged deterioration, I am concerned about durability.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
I'm happy if the price is a bit cheaper.
【Have you compared items?】
KN project Aluminum Front Fender Bolt
View detail