Reviews
A must for Brake hose replacement
There are many other inexpensive Copper Washers available as Universal Products, but they are often slightly larger in diameter or of poor quality.
In this respect, the quality of this product is stable and the texture after assembly is very good.
View detail
KITACO Needle SIMM set 3×6×0.3/0.6
Used to improve Kyanopi's mid-range speed.
I think it is good because it is cheap and effective.
View detail
Try it with Bolt of your choice.
[How is it used?
I purchased this product to refresh the exterior fixing bolt of SEROW225WE, which has been used for more than 20 years and has become rusty and lickable.
It is a convenient Spacer that kills two birds with one stone as it is highly universal and looks good because it can be easily matched with Bolts of 12.4π or smaller in size.
Was the one you received as per Image?
Although it is treated as a separate frame from the Spacer made by DRC that I purchased before, it is useful because the design and large size are the same, so I feel no sense of discomfort.
The price is just a little bit higher than the last DRCAluminum spacer I purchased, but it is still Reasonable enough and just like the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the impression of the appearance can be changed depending on the design of the BoltHead, and it can show various faces depending on the financial power (since the price goes up and down depending on the shape and material of the BoltHead) and Sense. (Since the price goes up and down depending on the shape and material of the BoltHead) and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I really wanted to buy the Red 20-pack, but it was already discontinued, so I could only buy the 4-pack.
We would like to see the 20-packs revived as the price per unit is slightly lower.
The product itself is not disappointing as I like the look and feel of the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, as there are some people who like or dislike the color of the same Red.
Other items that would be helpful
Point and hang of installation
Since it is like a fashion color used in place of a washer when fixing a bolt, it is a simple job to use this product (Aluminum Collar) by biting it when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be Large body and Large sturdy, but Bolts with good parenthesis design are expensive, so please consult with your Wallet and get the right bolt. Please consult with your wallet.
I have attached an image of a few different Bolts that I had at home together, and I would be grateful if you could help me with something.
[Opinions and requests to Manufacturer
I strongly hope you will bring back the 20-pack.
Please continue to sell the product itself as much as possible.
View detail
Functions and looks good as a Washer.
[How is it used?
When I replaced the bolt&washer that holds the exterior of my KDX220SR with a DRC-made bolt&washer, it looked so much better that I decided to use it to hold the exterior of my SEROW250. I checked Webike and found that the product I had purchased before was no longer available.
Did you receive the item as per the Image?
And the products I purchased before. Aluminum Spacer for M6φ18 The product introduction column is in a different frame even though it has the same name as this product. I wondered if something had changed in the design, but the product I received had the same design. (I would appreciate that more.) Prices are slightly lower.
I liked the design of the Aluminum spacer I purchased last time, so the price was a little lower and the quality was similar, just like the Image product.
Was it difficult to install?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How did you like it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the appearance can be changed depending on the design of the BoltHead and the financial strength. (as the price goes up or down depending on the shape and Material of the BoltHead). and can show various faces depending on Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
Was "Included Parts:" attached?
None
Spacer made by DRC previously purchased 20 Quantities:I was disappointed that the Set version was no longer available, but this product offers 20 Quantity:Set was lineup and I was happy to buy it.
Quantity:1 Set of 4pcs. means the unit price per pc. is 211 yen, but Quantity:1 Set of 20pcs. is 181 yen, so if you can use it up, you can use the Quantity:1 Set of 20pcs. is a great value.
Were there any disappointments?
I like the look of the product and I am not disappointed with the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, since there are some people who like or dislike the color of the same Blue.
Other items that would be helpful
Point and hang of installation
This product is like a fashion color that is used in place of a washer when fixing a bolt, so it can be used when installing a cap bolt of the appropriate length to the bolt stop of the part that can be attached. (Aluminum Collar) It is a simple job to chew and use the
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is top level, so I don't think there will be any mistakes in usage.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be large body and large sturdy, but the price of the bolt with good parenthesis design is also expensive, so please consult with your Wallet to get the right bolt. Please consult with your wallet.
[Opinions and requests to Manufacturer
This timeQuantity:1 Set of 20pcs. was available, but I would appreciate it if you could bring it back as some colors are no longer available.
View detail
There are many color variations.
[How is it used?
I replaced the bolt and washer that holds the exterior of my KDX220SR with DRC's Aluminum Spacer for M6, and I really like the way it looks. However, I wanted to change the aluminum washer to a Green Light type to match the Lime green exterior, and since DRC does not have Green Light, I went to Webike and looked for another manufacturer's product and found this one. "Lime green." purchased
Was the one you received as per Image?
Compared to the DRC model, it is a little taller and smaller in appearance, but the design is along the same lines.
Since they are not used side by side next to each other, it is not a concern.
At the time of purchase, the price was 990 yen for a package of two, which is relatively expensive compared to DRC-made products.
(DRC products are available in packs of 4 for 782 yen and up.) The product was exactly as shown in the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
Like the Aluminum Collar of today, this color can be used on Bolts with heads of 10.5mm or less in diameter, so it is highly universal, and the impression of the appearance can be changed depending on the Bolt head design used. The appearance can be changed depending on the BoltHeadDesign and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
The product has 13 color variations, so I think it will fit the image of large-bodied people.
[Was there anything that disappointed you?
I like the look of the product and I am not disappointed with the purchase.
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
The color I purchased this time is "Lime green." But...
Due to the nature of Anodized staining Candy Lime Green The color is very similar to the color of the original.
Other items that would be helpful
Point and hang of installation
As mentioned above, this is a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
It's been around for a while. FUJI TSUBO TYPE color." The outer diameter is larger than that of the "L", so please check if you want to install it on an exterior that has a depression.
[ITEMS TO BUY TOGETHER
As mentioned above, please purchase a bolt to match this product. Please consult with your wallet before purchasing.
[Opinions and requests to Manufacturer
This variety of color variations is quite attractive, please continue to sell as much as possible.
View detail
Black has been discontinued!
[How is it used?
The bolt that holds the exterior of the car started to rust, and I couldn't shake the feeling of disappointment after having gone to the trouble of making up the car with the Decal Kit.
Was the one you received as per Image?
The outer diameter was larger than expected and could not be used in places with a small depression, but on the other hand, the appearance of the large size could be used to disguise places where the mounting holes are gapped, so I think it was a good purchase for the right place for the right person.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when using Bolt.
How was your experience with it?
Used for other types of vehicles FUJI TUBO type. Compared to the Cap Holder, it is more like a fashionable washer that fits well with modern motorcycles.
However, the shape of the Head of the Bolt to be combined changes the look and feel of the Bolt, which is a bit troubling for middle-aged people with limited finances and Sense (the HeadDesign makes the CoolBolt very pricey...).
As for the product, the coloring of Anodized is vivid, and there is nothing to say, I am only worried about the fading caused by UV rays.
[Included Parts:were they on?
None
20Quantity at the time of purchase:4Quantity because the Set version was no longer available.:Buy the set
When I opened the product introduction page to write a review, I found 4Quantity:I was also troubled by the fact that the Set version was no longer available.
[Was there anything that disappointed you?
I like the way it looks and I buy it. As expected. It was
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
No special requirements. The outer diameter is Large, so please check if you want to install it on an exterior with a depression.
[ITEMS TO BUY TOGETHER
If the Bolt does not have a large head in M6 size, it is likely to be large body and large sturdy, but Bolts of good parenthesis design are expensive, so please consult with your wallet before you buy them. Please consult with your wallet.
[Opinions and requests to Manufacturer
Although this product is no longer available, it would be very much appreciated if another product with the same shape and color is continuously sold, so please continue to sell that product as much as possible.
View detail
Low Torque Location
Material:The aluminum anodized parts were about to be bald, so I inserted them between the parts.
It's just right to use it on Cowl for scratch protection.
It's a very solid object.
View detail
V125 K5 Fork Bottom Bolt Gasket as
V125 K5 Fork Bottom Bolt Gasket as
Cheaper than buying OEM Product
View detail
I wanted something thin.
I purchased these for the Rear Fender and to absorb vibration of the car body.
I put it on an area where there would be a lot of vibration, and it feels better to have it than not to have it.
I like that it's not too thick and not too wild.
View detail
Fits: Others 35mm diameter for Front Fork
Used for NSR50 front fork
There was an old fashioned method of putting a 10-yen coin in the front fork to harden the spring of the front fork, but instead of that, I put this in.
I wasn't sure if the damping was stiffer or not from a tactile point of view, so I feel that two or three cards should be included.
View detail
Real Carbon's pattern is beautiful.
I used this when installing TSR's Radiator guard on my CB1300SF.
Since we chose black color Radiator guard, the OEM screws (silver) looked floating, so we combined black dyed Button bolt and CarbonWasher. The black-dyed button bolt has a small diameter, so we tightened it with the CarbonWasher.
I am satisfied with the high quality of Carbon.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z750FX
Now you're safe.
Exactly. mk2 was in this
I bought a lock washer for z1-z1000 a while ago and it was a failure, so this is a relief!
View detail
Purchased to replace Oil
[How is it used?
Bought this to replace oil on my PCX125, used it between drain bolts to seal them.
How was your experience with it?
It was Exactly 12mm! It was a size larger than the Washer that was originally used, but it worked fine. I don't know about durability, but I don't need to buy more for the time being since there are several in the package.
I will make sure to change it every time when I change Oil.
How did it compare to other products?
[Points to note]
It comes in a lot, so if you think you don't need that much, you may prefer other products. However, it is a consumable product, so I don't think it would be a problem to have a lot of it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For places where you don't want to stand out.
This is the best choice for a washer in an inconspicuous location.
It is inexpensive and safe to use.
View detail
It came with your new Banjo. (Lol)
It came with the new banjo bolt, but will be a spare. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
Essentials when replacing Sprocket
I use it all the time when replacing ChainSprocket.
I tighten the DriveSprocket with pure STD nut without using lock nut, but if you use this lock washer and bend it neatly, the nut will not come off or loosen so easily.
Naturally, each time the Sprocket is replaced, the lock washer is also replaced with a new one.
View detail
Oil Check Bolt Sealing Washer for the Monkey 125
About quality and texture: I am happy with the quality of the oil check bolt sealing washer from K-Pit, the washer is made from copper and for the M6 sized bolt that are used for blocking the oiler port for the tensioner push rod. About the feeling of use: The OEM Honda sealing washer had been reused a few times and now had a minor leak, the replacement sealing washer is a perfect fit into the port on the left crankcase cover. Products to buy together: The 14mm sealing washer fort the tensioner push rod bolt would also be desirable to purchase along side the oil check bolt sealing washer to ensure zero oil leaks after performing maintenance on the cam chain tensioner system. Difficulty of installation: The process to install takes about 5 minutes, make sure oil is in the tensioner push rod oiler port before installing the sealing washer and torquing down the bolt. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda sealing washer but the K-Pit sealing washer is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Great texture and awesome looking!
As you can see from the pictures, it's very cool!
It's kind of luxurious…Motorcycle as a whole is tightened up.
Buy a Spacer in a color that matches your car's body color for a more attractive look!
Recommendation!
View detail
Used for R1000
Looks beautiful but the price is Neck,.
Just good for dress-up!
View detail
Unnecessary but awesome
I get more comments on the trick washers from Zeta products, Gives the bike a WORKS look.What do you say about a of washers? Necessary? No, but if you can justify the cost they're aluminum, won't corrode, look cool and are lightweight. This is an easy way to get your bike closer to that factory look without breaking the bank.. Super lightweight, perfect size for gas tank bolt, radiators, and 2 stroke exhaust mounts. I'd buy another if I had the place to put them. View detail