Reviews
It is perfect!!
It is perfect!! View detail
When carrying out custom, since an aluminum collar is fairly frequently needed, this product is dramatically helpful. Dropping during maintenance and also losing and becoming insufficient and running for buying it on the way, if you buy a mechanic you
When carrying out custom, since an aluminum collar is fairly frequently needed, this product is dramatically helpful.
Dropping during maintenance and also losing and becoming insufficient and running for buying it on the way, if you buy a mechanic youth entering ten piece since it is occasionally can also be prevented.
View detail
Installed on a 92 Grom.
I think it works better than I expected.
My Front fork is NORMAL, but I think a TuneUp'd Fork would be more effective.
Installation is as easy as Handlebar is heavy.
When I first put it on, I thought it was floating. I thought it was floating when I first put it on, but when I checked it carefully, it was fine.
I haven't driven the distance to work yet.
The effect I felt was that when I pushed the Motorcycle and walked around, it seemed more stable, and the feeling of handling was clearly different from when I moved it before the replacement.
I also think the Handlebar flutter before stopping and at very low speeds has been slightly suppressed.
I have not driven long distances, so I am not sure, but I was not too concerned about the effects of vibration.
Also, the transmission of road surface conditions was slightly easier than with Rubber.
This is just my personal view, so it will vary from person to person.
Unfortunately, the Instruction Manual misstates HandlebarNutTorque.
2.7N/m is a misnomer. Squeeze firmly.
I don't need my own Torque wrench, so I remember it was around 25N/m in the Instruction Manual when I got it with Visor as a rough guide.
View detail
alignment
Rear Sets position, used to avoid interference.
Quantity:1 Set of 2pcs., good product at a reasonable price.
View detail
![Premium Zone Cap Bolt Collar [for M6 Bolt]](https://global.webike-cdn.net/photo/impression/01/010963a63e961a6c10ec53139e6d5e07L.jpg)
One point
I wanted one point and I bought it. It's well made. View detail
Clutch leverWobble eliminated
Clutch lever Wobble one-shot elimination of concern
I added a bar end mirror, so if there is a Wobble, it will interfere with the Mirror Bracket, so I added this.
Smooth Clutch operation is now possible. 0
View detail
Say goodbye to stacked Washers!
Used to install Cowl Bracket on Zr-7S.
I bought it to install Bracketetetc. to Beauty, which is not adding up as I customize it.
In the temporary installation, I had stacked the Washer for M8 Bolt for now, but it was not beautiful and not good for my mental health, so I decided to use a proper color.
It is beautifully machined and anodized, so it is hard to corrode.
Various sizes and colors are available from various companies, so it is helpful to be able to choose according to the dimensions and colors you want to use.
This time, I was looking for something with a less large outer diameter, so it was a great help.
View detail
Takegawa CNC machined side collar's
I have a 2022 yellow Honda Grom, and after seeing the first reviewers Grom with these Takegawa side collar's, I knew I had to have them on my bike.. So I picked up 6 silver and 6 black and they look TOTALLY AMAZING. Only had them for a week, and im already getting comments on how Great they look.. Very well made CNC machined, and etched Takegawa on the sides.. These add a nice custom touch to any Grom.. Thank you, Brian Hyland P.S. Super fast shipping with FedEx .. I ordered these on Thursday afternoon and receive them Monday afternoon, that's almost 7,000 miles from Webike in Yokohama to New York City in 4 day's.. Wow. That's Fast!! View detail
Lineup of other materials would be better.
I purchased this spacer to connect the shift arm to the GEARShiftClamp when installing an external footpeg kit on my NSR250R MC21. I really wanted a Brass spacer, but they didn't have any, so I went with an Aluminum spacer. View detail
Used to install Engine protector.
[How is it used?
We chose KITACO products because they are reliable and must be sturdy since they will be used to install Engine protector.
Was the one you received as per Image?
Material is Aluminum A2017-T4 cut-out with Black Anodized Finishing.
How was your experience with it?
I haven't tipped it over yet, so I haven't been able to check its strength, but it will probably be Large sturdy w
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Points and hang of installation:Since the engine mount is used for installation, Screw lock fluid was used to prevent the bolt from loosening.
Availability of Instruction Manual:No Instruction Manual.
View detail
Very textured color.
In replacing the headlight
Camaed between homemade Bracket and Light.
It was nicely settled.
View detail
Outer Diameter Size is helpful
I have purchased a different size before, but this time I needed something other than the one for my motorcycle and was looking for something with an outside diameter of 25mm or more and an inside diameter of 10mm, so I was very pleased with your help.
I see that they are available in a variety of thicknesses. It would be great if they were a little cheaper, but …
View detail
I should have used this.
When I used the Extension Bracket to adjust the angle of the Fender Eliminator, it was too long and I couldn't set the angle as it was, so I used it to fine tune the angle and it looked like a reflection. View detail
Aluminum textured Spacer. High precision too!
This product is a highly accurate and Aluminum textured Spacer, used for height matching of the RearBOXCarrier! View detail
It worked for Cowl's Chatter and others.
This product is inexpensive, but it has worked well with Replacing Screw on Cowl's Chatter and other products. Now all I can hope for is durability! View detail
alignment
Rear Sets are installed for alignment and fine adjustment.
Size type, Quantity:2pc. Set-in, the price is not that high, which is helpful.
View detail
A mere Spacer is a Spacer.
[How is it used?
I had time to install the Boa Ace Spacer, which had been long overdue since it arrived.
Was the one you received as per Image?
Of course! I have purchased Boa Ace products many times in the past and I have confidence in them! This product also shows the beauty of polishing etc.
How was your experience with it?
There are no particular defects. I feel very self-satisfied because only the rider can understand this part, but…
[Points to note]
If I had to say something, I would say that Torque management is a Large cut, but we are hand Torque (appropriate), so what the … (laugh).
How did it compare to other products?
I'd like to think it's not like the extra Nut in the toolbox etc. or the proper Spacer (I hope).
Other items that would be helpful
I need a 20mm Wrench to remove the bolt on the Tandem Footpeg side and replace it.
View detail
justification
Used for adjusting the position of the Rear Sets and for fixing Spacer.
The size and thickness choices and reasonable price are very helpful.
View detail
Used for SilencerOffset
[How is it used?
When I installed RSV's Silencer on D Tracker, the exhaust was interfering with the License Plate and making a strange noise, and the exhaust was making the License Plate dirty.
Was the one you received as per Image?
It is an Aluminum tube as you see it.
Was the installation difficult?
Basically, I just put the Spacer between the Silencer Bracket, but I need to get the balance for offset on the entire exhaust pipe, so I need to make sure that the Bolt and Nut of each joint of the exhaust pipe, including the Cylinder attachment part of the exhaust pipe, are in place once. The silencer was lightly loosened, and the silencer was offset 20mm outside the vehicle body to prevent excessive force from being applied to a single point.
How was your experience with it?
As expected, the exhaust interference was eliminated, the noise disappeared, and the License Plate was no longer dirty.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
KITACO's ConveniencePartsSeries is very useful, but a lower price would be helpful.
Other items that would be helpful
Point or hang of installation:If you try to offset the silencer part alone, excessive force will be applied to a single point, leading to damage in the long run.
View detail
Suspension conversion
Bolt size conversion don't cheap Iron View detail