Reviews
For Pedal adjustment of homemade footpeg
I purchased this as a Material to create a 900SS (900SL) footpeg.
If you want a footpeg that has a bearing on the pedal axis, is coaxial with the footpeg, and does not have an extreme up or back position, the only decent footpeg left is the AELLA 900SS footpeg made by Kasuno, except for those made overseas.
Then why not just buy AELLA? I would say, but AELLA boasts gorgeous cutting and looks too flashy....
We had no choice but to use a footpeg (Position, stiffness, sobriety, all good) that was sold by GARUDA, but unfortunately it was already discontinued.
In addition, the GARUDA-made footpeg has a special eccentric footpeg receiving structure, and the pedal receiving part is made of POM resin material.
Even if the bearing is not a Bearing, there is no problem in operation, but the rigidity of the Bearing type cannot be beaten.
The problem with the Largeest is that the method of connecting the Footpeg is special and requires a Φ17mm eccentric Aluminum Footpeg.
Of course, Footpeg is also out of stock and cannot be repaired in the event of a fall.
Therefore, we decided to use only the holder part of the footpeg (obtained secondhand) and to modify the footpeg to the Φ8mm bolt coupling type commonly used by other companies, so that the pedal can also be mounted coaxially.
Prepare a bush that fits in the Φ17 section effectively, drill an M8 screw hole in the center of the bush, and fix the bolt so that it is tightened together with the footpeg while sandwiching the bearing of the pedal.
...Then, in the pedal section Bearing, the inner race and outer lace end faces are flush with each other, so the pedal locks up.
To prevent this from happening, a Spacer that only contacts the inner race part should be inserted......so this Washer or Shim was selected.
What you need is Bearing's Quantity:Pair (for Left and Right) To Quantity:Quantity in 1pc. each:1 Set of 4pcs., so there are 6 extra sheets, but that's OK, you may use them for something else sometime!
Shim thickness can be selected from 0.1mm, 0.3mm, and 0.5mm, but this time 0.3mm was used.
We wanted to reduce the gap as much as possible, so we wanted to use 0.1mm, but we didn't want to have it contact when the entire weight was on it and it was bent, so we used 0.3mm with a little bit of leeway.
If you are aiming for limit, there is a te to adjust by overlapping 0.1mm shims, but I decided not to use multiple shims because they are troublesome when servicing.
But on second thought, 0.1mm might have been better since I don't disassemble footpeg frequently.
0.It is better to overlap 1mm to 0.2mm gap because it should be Cool with gap Limit.
At any rate, 0.3mm is OK because it does not feel too governor!
It is not a part that requires extremely high precision.
I think it would be ideal for something like a playful take on "Lever".
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T120, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Bobber
Riding posture becomes easier.
I installed this on a 2018 Bonneville 120, I drove it for 6 months in OEM condition and wanted to do something about the Handlebar position as it was a little low for me. The price is reasonable and easy to install.
The only tool needed is to remove and install the Bolt, so the OEM is loosened with 14mm and the Kit is tightened with 17mm.
The firmness of the product when installed is sufficient. Almost no after-mounted feeling.
The Mirror is now in a higher position, so it is easier to see.
I can't say for sure since I haven't run long distances yet, but I think my upper body will be in a more upright position, which may cause my buttocks to ache faster. Recommendation for those who have difficulty leaning forward. Of course.
As mentioned in the product description, Cable and other devices can be used without modification.
In the case of the T120, the OEMWasher on the Bolt side as described in the instruction manual seems to be replaced by the Bracket pedestal that holds the Cable.
View detail
Fits: KAWASAKI Ninja250, SUZUKI GSX250R, KAWASAKI Z900RS CAFE, KAWASAKI Ninja400, KAWASAKI Z900RS
For NINJA400/250
KAWASAKI NINJA400/250 has the boss of Swing Arm deep, so it is necessary to stop the Rear stands hook. TAGUCHI MFG. (TaGu) I will include a photo of the :109001 Stand Hook in use. View detail
For mounting of cargo hooks
I used it to attach the Loading Hook for easy use of the Net to supplement the capacity of the Small TypeTank Bag. On the back side, a Loop is threaded through the Club bar.
I used a loading hook M8 with the same posh face as the colored Spool and a Stainless bolt M8x120mm without any modification. I think a M8 x 25mm colored spool or a 1cm short Loading Hook would have been fine. However, in the case of the Short Hook, the inner diameter is too large to interfere with the Club bar, and a thin Hook made of gold might be better suited for this purpose.
View detail
There are many different sizes.
You don't need impressions.
You will get Points, so please stay with us.
[How is it used?
Silencer BracketI just wanted to let it out a little.
Was the one you received as per Image?
And I've seen the actual thing at Image itself Naps.
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
That was great.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
View detail
The only color available is Silver.
[How is it used?
I bought it to add Accent while replacing the Plus screw that started Rust stopping the exterior of a pre-2000 vehicle.
In the past, there used to be a wide variety of color variations available from various manufacturers, but now they are rarely seen and the choice of colors has become limited.
Was the one you received as per Image?
The design of this type of aluminum spacer is common. FUJI TUBO type. The simple design with no bumps and no dents and the universal nature of the product made it very easy to use and just like the Image.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
In functional components, as the appearance and product name suggest. Washer/Color. since it is only Power up!" Ya Better fuel economy! There is no effect of etc.
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
There is no effect of weight reduction, reinforcement, etc. (strictly speaking, there is a slight increase due to the color) and it costs a lot of money, but I like this kind of product and I am very grateful for it.
It looks like a one generation old FUJI TSUBO Type design, so some people may think it looks old-fashioned, but if you install it in a slightly older vehicle, you will be able to see the new design. "Oh, there were people wearing colors like this in this era..." I personally think it looks strangely like a good fit.
[Included Parts:were they on?
None
4Quantity:Considering that the price per set is 2,938 yen, the unit price per unit is 734 yen, and there are no color variations, I would like to see the product sold at a lower price, but since the product is out of season, it is probably a good thing that it is still on the market.
[Was there anything that disappointed you?
As mentioned above, there is only one color variation, Silver.
I have no problem with it, since I decided to just paint it whatever color I wanted after purchasing it, but to tell the truth, I would like to have at least Red, Blue, and Black options.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
It is a very easy-to-understand product, so I don't think that incorrect usage is likely to happen.
[Notes]
None in particular. Please note that there are no colors other than Silver available when ordering.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Collar, so please prepare a cap bolt of each material & length you want to install.
[Opinions and requests to Manufacturer
I am grateful that they are selling them in this day and age, but I would like to see them sell cheaper equipment if possible.
View detail
For a little Accent
[How is it used?
The bolts that hold up the exterior of my long-owned motorcycle have become rusted over the years, If we're going to replace the Bolt anyway, let's put some Accent in it." This product was purchased to match the Cap bolt with the
The several color variations are useful because they allow Spacer to be used in accordance with the color of the car body.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
None
2 piecesQuantity:The price for the set is 880 yen, and I would appreciate it even more if it were a little cheaper, but the product is out of season, so I guess I should be glad that it is on the market.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 9 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, please purchase a cap bolt of each material & length that you want to install.
[Opinions and requests to Manufacturer
It is easy to purchase large quantities if the price is a little lower, so a quantity of 10 pieces is 10% cheaper.:A Set would be even more appreciated, please.
View detail
Certainly the vibrational frequencies are thinner!
Compared to before installation, the ThornThorn-like vibration between 3000 and 4000 rpm has become a little more mild. I would like to install a heavy bar end with Plus alpha from now on.
For your information, the product number is AT-W0006A for S1000RR to 18 years old cars.
I initially purchased AT-W0007 by mistake. The←s product is for S1000RR '19 and later.
View detail
Offset firmly in place.
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
So we measured the amount of gap and purchased this product to offset the aluminum collars on the rear suspension mounting and silencer band side.
How was your experience with it?
The measurements were perfect and the Offset was solid.
We also did a good Torque management on the fixation, so I don't think there is any problem.
How did it compare to other products?
It was Large strange to find a product that fits Exactly because various Manufacturers are offering similar products.
I have the impression that this product had the best price and Size development.
You can buy them at Home center, but basically you should buy them at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
nothing special
View detail
For fine tuning
Used to compensate for Cowl Bracket Gap in combination with other thicknesses of Spacer View detail
for adjustment
Repurchased to add a step on the Screen I had previously put on. View detail
Universal and can be used in many ways
[How is it used?
The bar of the external Rear Sets was not long enough, so we put it on to extend the length.
I personally prefer longer ones because they are easier to load.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to insert between Footpeg and Footpeg Plate.
How was your experience with it?
It serves its purpose because it is used as a simple color.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It's just a color of Aluminum, so it could be a little cheaper. I thought it was a good idea.
but it is good to have a variety of Sizes to choose from.
View detail
Exactly!
This time, I had to buy it in a hurry because the Carrier RANBolt I was installing had come off and was missing.
I was just about to add a screw lock material, but the other side was still there, so I measured the size and purchased a bolt at a nearby home center!
Screw lock material was also added!
View detail
I feel the quality is getting better.
Used to install Rear Sets on a YamahaXV750E.
I have purchased Aluminum Collar made by K&TBrand several times, and I think the quality is somehow better than before.
Previously, I had purchased it as a usable aluminum collar anyway, as the cutting marks were fully visible.
The surface was smooth and the corners were well rounded.
Although the material is unknown, such as Aluminum Alloy or the surface treatment, it is used in the same direction as the Bolt, and the force is applied only in one direction, which is fine.
If it is not anodized, it may corrode as it is used.
If we are interested in using it for a while, we will consider other Manufacturers.
The cost performance is outstanding, so if you need an aluminum collar, why don't you first look for a size?
View detail
Spacer
Purchased to fine-tune the standing width between the Screen and the Screen stay. View detail
uplift
It is used to create an angle between the Screen stay and the Screen. It is black, the same color as the Bracket, so it does not stand out and is unobtrusive. View detail
Used to reduce rattling of Brake lever
[How is it used?
Brake lever was rattling badly and I bought it in hopes that it would get better.
The Touch feeling of the MASTER itself was not so good, but I suspected that maybe it was because the rattling was so bad that I could not press the Piston straight? I also suspected that it might be because I could not press the Piston straight.
To be honest, since it is a SmallEngine Displacement Volume for a foreign car, I thought that the rattling might be terrible combined with poor accuracy, but I tried it when I learned from an article on Webig that this Washer can reduce the rattling.
Was the one you received as per Image?
As you can see in the picture, it is just a Washer.
It is not a very expensive product, but the price of this thin Washer may be too expensive for some people...
Was the installation difficult?
Simply remove the Brake lever and insert it in between.
Washer is just on Lever, so it is a bit frustrating to have to Gap it back to MASTER.
How was your experience with it?
Actually, I first tried 0.3mm, but did not feel much change. 0.6mm with 2 layers of 0.3mm reduced rattling in a good way. However, I felt that the movement of Lever was a little reluctant or stuck, perhaps due to the two layers of 0.3mm, and I felt it was dangerous.:I settled on 1pc. Even with 0.5mm, there is some rattling, but it has been reduced to an acceptable level.
However, I did not see any large change in the touch feeling that I had expected, and I felt again that in such a case, I had no choice but to replace the entire MASTER.
[Included Parts:were they on?
Washer only.
[Was there anything that disappointed you?
nothing special
View detail
Accuracy.
The accuracy is excellent, but it is somewhat expensive for the color. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125
Operation Fee Ring Improvement
I am riding a GSX-R125, but when I use high RPM or go for long touring, I felt the clutch connection was loose. I was a bit worried about disassembling the clutch as a DIY project, but it wasn't that difficult. The most difficult part was removing the gasket.
I was concerned about the possibility of one-sided contact, etc., considering the spring's seating position, so I removed the burrs with diamond sandpaper. The thickness was 0.9mm when I measured it with Caliper, though it was described as 1.0mm. I thought, "Why is this a plate material? I thought so, but... I have not verified whether it affects the surface of Spring's seat or not, because it is my personal impression.
After the installation, the connection feeling of the clutch became direct. The feeling of slipping when shifting up at high rpm has been reduced. I think that the pressure of the OEM clutch is stronger than that of the Shim, and it is harder for the clutch to slide. I thought that the weight of the clutch lever would theoretically be heavier since the spring has been reduced by the thickness of the shim, but there is no change that I can actually feel.
I think the Shim installation was effective. If you are dissatisfied with the clutch feeling, it may be worth replacing it. Personally, I am happy with the replacement.
View detail
Height adjustment
I bought a used rear caliper support and used it to adjust the height because the wall thickness was different, perhaps due to a difference in spec.
The Swing Arm was black, so I purchased this color, which was available in the same color lineup.
It is good to measure the height and diameter in advance so that you can choose from a wide lineup of similar Sizes.
It was firmly beveled and ready to use as soon as it arrived.
View detail