Reviews
It purchased to the vibration proof of the screw stopped in the case of chamber exchange. When a screw and a nut are attached to stay as it is, there is chatter sound by vibration and it is the touch which is not so good, but it was able to be made to
It purchased to the vibration proof of the screw stopped in the case of chamber exchange.
When a screw and a nut are attached to stay as it is, there is chatter sound by vibration and it is the touch which is not so good, but it was able to be made to decrease to some extent by attaching this.
View detail
A box was not attached without this product. Between a base and a clamp, kiln is carried out and desorption of a box is enabled. Although it is casual goods, there is a size aimed at perfectly. It is important in Colet. He is an unsung her
A box was not attached without this product.
Between a base and a clamp, kiln is carried out and desorption of a box is enabled.
Although it is casual goods, there is a size aimed at perfectly.
It is important in Colet.
He is an unsung hero.
View detail
It used for monkey custom vehicles. it used for an engine mount portion, a caliper, and a wheel carrying out center appearance. It is found useful. It is recommended.
It used for monkey custom vehicles.
it used for an engine mount portion, a caliper, and a wheel carrying out center appearance.
It is found useful.
It is recommended.
View detail
It used in order to make the old type disk rotor of SR400 into flange bolt & wire lock specification. If there is this [ no ], the outer circumference of a flange will not be hit and fastened on the edge of a hub. Therefore, it is that of ! regard
It used in order to make the old type disk rotor of SR400 into flange bolt & wire lock specification.
If there is this [ no ], the outer circumference of a flange will not be hit and fastened on the edge of a hub.
Therefore, it is that of ! regarded as one-piece 200 yen over being high but although appreciated very much, and is three.
View detail
It purchased to the vibration proof of the screw stopped in the case of chamber exchange. When a screw and a nut are attached to stay as it is, there is chatter sound by vibration and it is the touch which is not so good, but it was able to be made to
It purchased to the vibration proof of the screw stopped in the case of chamber exchange.
When a screw and a nut are attached to stay as it is, there is chatter sound by vibration and it is the touch which is not so good, but it was able to be made to decrease to some extent by attaching this.
View detail
it used for an external chamber and pure stay to carry out location appearance. It is the touch which may come to be pure in not attaching to a silencer band but making a stay main part offset. If it was a decade ago, had just been going to attach
it used for an external chamber and pure stay to carry out location appearance.
It is the touch which may come to be pure in not attaching to a silencer band but making a stay main part offset.
If it was a decade ago, had just been going to attach forcibly, but there are parts which also reach an itchy place and they are saved these days.
View detail
Since a disk rotor did not come to the center of the caliper bracket, it equipped. It is the left when the right will be approached if you have no spacer, and it is a washer of a home center. It was exact at a 0.5-mm spacer.
Since a disk rotor did not come to the center of the caliper bracket, it equipped.
It is the left when the right will be approached if you have no spacer, and it is a washer of a home center.
It was exact at a 0.5-mm spacer.
View detail
Although the stay of the number plate was made on one's own It was used for the mounting hole of the stay. When searched by 2 t of & board thickness for M6, this product was discovered by Mr. Kitaco. The size from which a color & washer also diffe
Although the stay of the number plate was made on one's own It was used for the mounting hole of the stay.
When searched by 2 t of & board thickness for M6, this product was discovered by Mr. Kitaco.
The size from which a color & washer also differs by M5 and M6 combination type, respectively is attached.
Although it thinks that the size of a rubber is somewhat small using M6, using M5, it seems whether to be sufficient size.
View detail
It is the comparison with the aluminum collar by P company which was being used until now. The color with a small street price is cheaper than P company. A part of big thing had the high thing. Finishing of processing is felt somewhat ruder th
It is the comparison with the aluminum collar by P company which was being used until now.
The color with a small street price is cheaper than P company.
A part of big thing had the high thing.
Finishing of processing is felt somewhat ruder than P company products.
The direction which the result condition of processing worries recommends P company.
(If a day passes since alumite treatment is not carried out, it will become cloudy, but it is --) It is used by inconspicuous Tokoro.
Finishing is not worrisome.
And if it is a cheap size, I recommend Mr. Kitaco.
View detail
Although he bought it for height adjustment, since the die length of an outside with a cap was together, it is comfortable and was decided. He buys it and I think that it was good.
Although he bought it for height adjustment, since the die length of an outside with a cap was together, it is comfortable and was decided.
He buys it and I think that it was good.
View detail
It uses for the packing of the vibration isolation of a muffler. Since it excels in heat resistance and a size and thickness also have a broad kind, it is found useful very well. Although it is consumable goods, I think that I will use for the pla
It uses for the packing of the vibration isolation of a muffler.
Since it excels in heat resistance and a size and thickness also have a broad kind, it is found useful very well.
Although it is consumable goods, I think that I will use for the place where chatter sound is heard lavishly since it is not also a price which is worried.
View detail
In hand guard wearing, it was used in order to avoid interference of a throttle holder and a grip. Since it is the thing which was being looked for, it is a five stars without a complaint!
In hand guard wearing, it was used in order to avoid interference of a throttle holder and a grip.
Since it is the thing which was being looked for, it is a five stars without a complaint!
View detail
Attachment can do a change assist simply by using this product. A grotesque net is removed and it only exchanges for a color set. The direction of the model to which the grotesque net is attached to the cover recommends purchase together with an a
Attachment can do a change assist simply by using this product.
A grotesque net is removed and it only exchanges for a color set.
The direction of the model to which the grotesque net is attached to the cover recommends purchase together with an assist.
View detail
If it says from [[in play part 2]] conclusion, the products here will be the highest products in general!! The aluminum spacer collar here is inside diameter:phi8.2mm. Outside diameter: phi20mm Height: It becomes a 25-mm product. If existence of W
If it says from [[in play part 2]] conclusion, the products here will be the highest products in general!!
The aluminum spacer collar here is inside diameter:phi8.2mm. Outside diameter: phi20mm Height: It becomes a 25-mm product.
If existence of Webike is not known Didn't it meet with the aluminum spacer collar made from a kitaco, and the vivid bolt?,
.
.
By Webike, customization filled to originality and creativity can be performed, and it is a delightful limitation!! An attached image,
The muffler made from p's supply is treated to the address V125, and it is a muffler protector made from burial. (tune by a moriwaki sticker and #OS800-30000-41!!) In order to equip,
They are contents which use the aluminum spacer collar made from a kitaco and vivid bolt which are the products chosen as the end of deliberation.
The spacer collar made from a product muffler protector made from burial 竊?kitaco.
(#0900-093-00059, inside diameter phi8.2mm, outside-diameter phi20mm, and 25 mm in height) Product muffler made from product muffler made from product muffler made from 竊?p's supply attached silencer band 竊?p's supply attached M8 aluminum-collar (outside-diameter phi23 mm and, and 22 mm in height) 竊?p's supply attached aluminum -.
Washer & flange nut we for product muffler made from billet plate 竊?p's supply attached silencer band conclusion,
- vivid bolt made from a kitaco of M8x100 (#0900-080-0015) was chosen for the bolt used of this customization!! [ -- [refer to [ the in play part 1 ]] ], if two or more sets of the addresses V125 which drive the inside of a town are seen,
It seems that its respectively different customization was given, and each was colored with personality and loves.
Moreover, is conversion of a muffler mentioned the common feature of the customization?
.
.
As a protector to the replace muffler which you chose, if it equips with the chamber protector made from burial, it is how?
(Incidentally the outside diameter of a white duracon resin part is phi36mm.)
The size of the sticker of a moriwaki is about 56 mm.
Since the outer circumference of a duracon part is about 113 mm, the sticker of a moriwaki becomes a size like the semicircle. Replace muffler which incidentally must be praised, steiner muffler made from p's supply !!.
(A thing with a pleasant low-and-medium-speed strengthening muffler to the extent that a willy is likely to be carried out by zero start TSU which is a word!!)
View detail
Spacer collar discovery TSU perfect to W650!! If the following 3 items are treated, That there is nothing incompletely, it becomes smart extremely -- TSU!! [Kitaco] aluminum spacer collar: #0900-093-00027: M6 size: Outside-diameter phi18mm : 8
Spacer collar discovery TSU perfect to W650!! If the following 3 items are treated,
That there is nothing incompletely,
it becomes smart extremely -- TSU!! [Kitaco]
aluminum spacer collar: #0900-093-00027: M6 size: Outside-diameter phi18mm : 8 mm in height: 1pc.+ [antlion] Cap screw flange (chromeplating): #09001-CR:
M6 (it is 18 mm in outside diameter) : Gatling: 1pc.+ [tachyon] of the 2pcs./set(s) Titanium cap bolt: #TC06050: M6x50: It is the contents of the picture which combined the 1 pc. above and 3 items.
This part becomes near the side stands on the left-hand side of [ car-body ] W650.
The portion which connects the side stands switch which becomes a safety device interlocked with the operation of side stands, and a frame is right.
With the original manufacturer's product, the size of M6x40 is treating this bolt.
And a hollow is on a frame as if the head of this pure bolt was buried in the frame.
If the hollow of the frame of this portion is measured, it will become a hollow whose outside-diameter phi18 mm and, and depth is about 10 mm.
Even if one cap screw flange of an antlion remains ...?
Say and say.
There is no such thing!!
It will be OK if the cap bolt of M6x20 is prepared!! The swing arm left-hand side of W650 has a chain slide guard made from a rubber.
M6x18 is being used for the pure bolt which connects this through color.
It will be a cinch if this bolt is replaced to the cap bolt of M6x20 through the cap screw flange and pure color of an antlion!! If a side-stands stand is hung and parked at W650, W650 will incline to the left.
I want brightness also on the leaning left-hand side!!
It is a reason for having performed this dregs MAIZU.
* Two bolts used for this customization.
M6x50 It reaches. Although we used the bolt of M6x20 as the titanium-alloy bolt made from a tachyon, I think whether the cap bolt made from a stainless may be sufficient.
However, I consider only the bolt made from aluminum as it is better not to use it.
Because an aluminum bolt can be used only for the place in which stress is not applied extremely!!
View detail
It was a spacer of the size just which was just being looked for. Although it was after preparedness that I also have you manufacture by an honest one-off, it is a lineup of considerate accessories. Although quality is also truly small bad, it is
It was a spacer of the size just which was just being looked for.
Although it was after preparedness that I also have you manufacture by an honest one-off, it is a lineup of considerate accessories.
Although quality is also truly small bad, it is the one highest article.
I think that the direction troubled by the fitting of parts looks at the convenience parts of the kitaco once, and there is no loss.
View detail
It was used for the height adjustment of the attachment of a hand guard. Since an outside diameter, an inside diameter and die length, and a variation occur and it can purchase and tune finely to number type 1 clue, it is convenient.
It was used for the height adjustment of the attachment of a hand guard.
Since an outside diameter, an inside diameter and die length, and a variation occur and it can purchase and tune finely to number type 1 clue, it is convenient.
View detail
a gorilla is custom alike and it is using it. although it was custom alike with the brand-name parts of HONDA and components were diverted, when it was the order which looks at a parts list, components came at hand and there was a case of HAZURE (whil
a gorilla is custom alike and it is using it.
although it was custom alike with the brand-name parts of HONDA and components were diverted, when it was the order which looks at a parts list, components came at hand and there was a case of HAZURE (while a size is not understood, since an order is placed by intuition, it does not suit) plentifully.
Since the size is shown, the convenience parts of KITACO are found useful.
View detail
When attaching the sub frame made from KITACO to the zoomer (ruckus) of carburetor specification, this color is required in order to bury it, since a crevice is made. Although it thinks that color purchases because it is required, it sticks from the b
When attaching the sub frame made from KITACO to the zoomer (ruckus) of carburetor specification, this color is required in order to bury it, since a crevice is made.
Although it thinks that color purchases because it is required, it sticks from the beginning, and should be a little cheap just, I think that it is a good place that can buy it afterwards when it loses.
View detail
I think that an aluminum collar is brought and there is no loss since it will also be dressed up if it uses in order to secure the clearance of components, or it uses, carrying out an anodized.
I think that an aluminum collar is brought and there is no loss since it will also be dressed up if it uses in order to secure the clearance of components, or it uses, carrying out an anodized. View detail