Reviews
Well, it is about the same price.
It needs a little processing, but I think it's a good cosmetic product. View detail
Installed on JA45
Although it is designed for JA60, it can be installed on JA45 as well.
I'd have to get a separate Bolt for just the 1 pc, though.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
It suddenly got cold.
I bought this for protection against the cold because it suddenly got cold. I still need a leg shield for CUB. View detail
It is for JA60 but installed on JA45.
He tried to buy it at Webig, but gave up because of the two-month delivery time.
I bought it in stock at another Site.
Since it is for JA60, there were some differences from JA45 (installation around the engine) and some parts that needed to be modified in relation to other retrofit parts, but it was not that difficult.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Leg guard with material flexibility in proportion
Personally, I only do this to the extent of OffTrek at most ….
I ordered this Leg guard to improve windproof performance.
It is hard to understand even if you check the website, but the upper side is fixed to the H-shaped Carbon-like GuardBody, and the upper side is fixed to the horizontal Gold Bracket with the Bolt on the upper side of the frame cover. The lower side is fixed to the U-shaped resin parts on the under frame with the Bolt.
We have a Daytona & Phi; 22.2mm (7/8in) Engine Guard, so it is not possible to fix it with these U-shaped plastic parts.
SpaceMount (for Bicycle) & Phi;22~25mm made by Miknowla were lying around in the stocked materials, so we used these.
I used to have a forced air cooling fan on my Ural Sidecar.
Clamp the bolt to the Pipe with a bolt fixation, and you can freely place a reasonably strong bolt hole, which is just as well, because it is convenient.
Bolt fixed without bridging
Quantity:Pair (for Left and Right) It would be nice if we could both take advantage of the existing holes, but … it's not that convenient to go that farω.
Since I don't care about irreversible processing ΦDrill with a 6.5m drill blade and fix a single hole quickly with the supplied bolt.
The carbon-like resin body also flexes without difficulty, making installation perfect.
Style also has good wind protection. I would like to try running in the rain, but generally it looks good.
It will be interesting to go on a super long touring trip down the road again as well as the high-speed maneuvering with the Trailer load that I have been into recently!
View detail
I've had it for 8 years.
I installed it with Small machining and … what a surprise, I've had it for 8 years in its current state.
I've kept most of them covered with Cover, but even so, they've lasted surprisingly long; if they were OEM, they would be a shadow of their former selves.
As expected, recently it has become difficult to remove dirt and Black Mold grows under the Cover, but each time I put Dustcloth soaked in kitchen bleach and bleach it. This is a very good way to revive it.
For persistent stains, such as those from shoe hits, use Micro compound. In moderation." Taking.
I know it's cheap, so I should buy a new one, but I'm using it after modifying it a bit, so it's a hassle to replace it and modify it again, and I'm quite attached to it.
What's a bit of a surface white is the color loss and the decrease in transparency.
I recently noticed that it was originally Beige-ish. That cheesy color. was nearly bright White from sun exposure & fading over time.
The transparency is much less and no longer shows through to the Levels close to OEM.
The surface also remains smooth without any MicroCracks.
This made it even harder to replace them.
I heard that some lots of this product have a round BALI in the Center section (← did they change factories along the way?). I heard that some lots of this product have a round BALI in the Center part (did they change the factory in the process?), but perhaps the current distributed product has been solved by eliminating the BALI.
I can recommend it quite strongly because it is semi-durable and becomes more luxurious with each use (laughs).
View detail
TIGHT
2016 Yamaha Zuma USDM. This is the easiest install ever. 3 screws. The fit is great, the only thing I wish, is that they offered options for some sort of grille mesh over the gaping holes. I had some oval scrap laying around, so I rigged that in there. It also allows for more engine sound. View detail
appearance
It looks better Parenthesis and is easy to install. I am not sure how well it works yet. View detail
powerful
I was concerned that it would need to be relocated because the product image did not show Horn, but there were no problems installing it as is.
The description says to remove the Headlight and work on it, but the Coupler and other parts remain connected and Large sturdy.
The Pipe is quite thick and powerful.
The windshield function is also solid and will be powerful for long-distance touring.
The load can be increased by attaching a PET Bottle Holder or similar device to the inside.
Of course, it is necessary to remove the engine oil when changing it, which increases the time and effort required.
View detail
Perfect below the knee
I replaced the Engine Guard with a MORT SKILLS, and was worried about the installation of the 22mm Bracket from Home center, etc., because the 22mm bracket does not fit the 22mm stay that comes with the OEM 19mm bracket.
It was installed as beautifully as if it were Included Parts:.
Drilling holes for Fixing Screws is required.
View detail
Nice very Super cub50........................................... View detail
Leg shield LITTLE CUB
I bought this leg shield for SUPER CUB knowing that it needs some modification because of its low price. I installed it by shaving only the part near the handle. I was disappointed with the position of the bolt fixing holes at the foot. I wonder if this is a defect of only the product I received? View detail
After all, … low-priced products
I bought it because I was using an OEM compatible from another company and it went bad quickly.
After all … it is what it is.
It looks good attached in the picture, but the bottom part of the Shield seems to melt easily in the heat….
I've bought this kind of compatible product 3 times… probably the same total Gold amount as buying OEM.
good point
Inexpensive. Easy to obtain.
If you think of it as a painting base, it is.
A bad point
Thin and low strength.
Heat sensitive.
The durability is low, so you may end up having to repurchase many times, and in the end, it is cheaper to buy OEM;
It is often the case that even a battered used CUB has an intact leg shield.
Don't be a cheap buyer.
It is still available and I will use it, but next time I will not hesitate to go OEM.
View detail
Fits: HONDA SUPER CUB C90, HONDA SUPER CUB C70, HONDA SUPER CUB C50
If it's compatible, this is the best!
The one I'm using now is no longer working, so I thought I'd see if I could find a compatible one from a different place. The price is a little higher than the last one I bought.
good point
The Bolt hole and other dimensions are perfect because it is a compatible product.
●BALI is also less.
It is also moderately thick.
Quality that appears to be OEM at a glance.
Cheaper than OEM.
A bad point
Quality is lower than OEM.
Compatibility products are cheap and easy to buy, but the quality is often poor. However, this one is just as good.
View detail
As a Leg shield for CUB PRESS
It's deformed a lot on the inside, and in the winter, the wind will be stronger against your knees.
I installed each part with temporary fixation, but the position of the hole did not match, so I had to process the long hole and
I had to drill new mounting holes.
But for less than half the price of OEM, it's good enough for Cost performance!
I'm not angry because I imagined this much from the beginning (hole misalignment and deformation).
I think anyone can install it if they can drill the holes.
Best of all, it's much better than wearing OEM rags!
View detail
Price.
It's dry, though.
I bought this cheaper one because my OEM Leg shield was ruined.
good point
Cheap.
The position of the Bolt is neat so it is easy to install.
I thought it was easy to paint.
A bad point
●Thinner than OEM, so less strong.
So, it is easy to make a hole when you put Emblem.
The area around the exhaust system is easily deformed by heat.
As a solution, near the exhaust system, Cut or Paper is used to take a little clearance and make a gap.
Maybe it's wrong to compare with OEM because the price is low, but it's not as good as OEM.
As for Merit, I want to keep it inexpensive like I do. Or if you want to add some color to your Leg shield, it's good. Depends on how you use it.
View detail
Good
Because Cooling fan has been lightened, under Seat at this time of the year, it becomes hot immediately It is Because it is troublesome to return Cooling fan to NORMAL by the season, I decided to purchase it It is not a long distance, but Seat which had become hot on the way to work is not a concern so much after installation It's gone View detail
It can be used without problems
Far cheaper than the OEM, and with a little work, it works just fine I have no complaints about the color However, the bolt holes on the Engine side are misaligned with the Large and need to be corrected After the modification, the hole is not visible We made a hole-filling plate with the cut-off part and repaired it with a high-performance adhesive (the one that exposes it to ultraviolet rays) It is too big And the part that is fixed with the plate at the back end is too big I feel that it should be corrected The performance is excellent, so if you can install it yourself, you can do it yourself "Buy I think so View detail
It works fine
The LensRiproLeg shield for the SUPER CUB
I bought this vehicle used and it didn't have the Leg shield on it, so I bought it
It is completely safe to use
The color is Creamy White
I think it is better to be careful when using it on a car with a pure white side cover It is
Also, as others have said, I think it's thinner than the OEM (You can only see the light source through it if you shine a strong light source at close range.)
There are some weak parts in the overall construction, but I was able to install it without any modification
If you put it on, because only the Leg shield is Polished, it is the maximum Ripro feeling, but If you use it for a while, I think it will come on its own
Also, there is a BALI in the cut (but only if you cut it with a cutter) and overall There were some powdery things on it, but nothing wrong with it
It's a million times better than having a battered OEM on it
I was a vehicle that had been Pipe Handlebarized, so I had to process it from the moment it arrived and It's a good thing that I can process it without hesitation because of the price
In general, this is a product that can be described as a Recommendation
Even if you buy into a processing base like I did, as a Reproduct of STD Shape It's perfectly fine either way, even if you're buying
View detail
Cool!
Bw039;s ride
That's the first Parts you want to keep in check!
And it looks good
Parts that make sense from a functional standpoint
It's a bit stuffy underfoot when you stop in the summer, though..
View detail