Reviews
Good
Glaringly and without insistence, it is Simple and luxurious, which suits my taste.
It would be nice if it was a little less expensive.
View detail
details
the little detail that makes all the difference. very beautiful pieces, as usual with Yoshimura. The only question is which side to put the banana on!. View detail
It's easy lol and looks perfect!
It is easy to fit.
The visual effect is perfect!
Cost performance is honestly bad but it looks better so I'm ok with it lol.
View detail
Practical & good looking
These are of a nice elegantly simple design that compliments the location near the radiator. They come with a rubber seal that seems to secure the item in place adequately, once fitted. Make sure the plug is pushed in all the way, I noticed I hadn't pushed mine fully into place until after I'd been for a long ride. View detail
Super plug
I've been dreaming about this detail from Kitako for a long time. It seemed like it was missing from the Honda monkey. Beautifully crafted from aluminum, installation takes minutes. Now this part of the semolina has acquired a finished and laconic look. I recommend to buy.
I've been dreaming about this Kitako part for a long time. It seemed to be missing on the Honda monkey. It is beautifully made of aluminum, installation takes a few minutes. Now this part of the semolina has acquired a complete and concise look. I recommend it for purchase.
-------------------------------------------------- -------- I have long dreamed of this detail from Kitako. It was not enough for Honda Monkey. Greatly made of aluminum, the installation takes a matter of minutes. Now this part of the semolina has acquired a finished and laconic appearance. I recommend buying. I've Been Dreaming ABOUT THIS KITAKO PART A LONG TIME. It Seemed to be Missing on the Honda Monkey. It is Beautifully Made of Aluminum, Installation Takes a Few Minutes. Now this Part of the Semolina Has Acquired a Complete and Concise look. I recommend it for purchase. Powered by Google Translator
View detail
Simple design and good parenthesis.
I wanted something simple, so I bought it. View detail
Cheap and effective dress-up!
Whether or not Parenthesis is a good idea is up to you.
Installation is quite hard, so it may be easier to apply a thin layer of grease or the like.
View detail
Looks good.
To PetitCustom.
The OEM Frame cap was hard, but this one was also hard to fit.
If the body of the cap is hard, it may be a good idea to lightly tap the cap with a plastic hand by applying Dustcloth or a military glove to the cap.
View detail
The coloring is also good.
It's a bit pricey, but the Anodized color is great and it's one of the best products for hiding holes in Frames. View detail
OVER??
I used to have just a manufacturer's cover, but I found this one and installed it. I was a little bit worried because of the price of the Both Sides, but I use other Over products, so it was not a reason for me not to buy it.
I am very satisfied with this product.
View detail
PivotHole Plug
z900rs Frame Color and Best Match
Rear Sets are also over and not too assertive.
It was GOOD! 。 Glad you found what you were looking for.
View detail
OverRACING lovers.
I bought it because I like OverRACING!
Rear Sets are also Over, which is a nice touch!
I wish the price was a little lower.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERFrame Hole Cap
I was concerned about the hole, so I put it on. one point and it looks good. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Excellent quality and fit.
Great addition to my bike and has the added benefit of keeping crud out of the swing arm pivot. Well made as to be expected from Yoshimura. View detail
Really nice dress up accessory
I chose the titanium colour option & I wasn't disappointed. Even in the packaging it looked amazing. The product has a decent weight to it & is well machined. I do have one gripe.. Fitment is very tight and I had to use a mallet & a bit of physical effort to whack both caps into place. As a result; a small amount of the rubber O-ring (that is fitted to the cap) was stripped off (the cap itself & bike were undamaged) -I don't think it'll be an issue for waterproofing, but I doubt those caps are coming out any time soon. Please note: if it wasn't for the struggle to fit the caps, I would have given this product 5 stars. View detail
I really like the Yoshimura frame cap.
Before choosing this product, I was wondering whether to use frame caps or seat bolts. There were several brands, but I chose Yoshimura frame caps. I had confidence in Yoshimura's brand as it was currently equipped with a Magnum muffler and carbon heat guard. After installing the frame cap, my Monkey 125 became even more luxurious. -------------------------------------------------- -------- I was worried about whether to choose this product as a frame cap or a seat bolt. There were several brands, but I chose Yoshimura Frame Cap. Currently, Magnum Muffler and Carbon Hitguard have a confidence in Yoshimura's brand. When I put the frame cap, my Monkey 125 became more luxurious. Powered by Google Translator View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Premium Quality
Easy to install. Essentially plug and play. Great contrast with the black frame of the bike for a premium look. Highly recommend! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
It's GOOD that it doesn't stand out badly.
One SideQuantity of Cap for 3 locations each for a total of 6 locations.:Set
I was worried that it would stand out and look uncool if I put the same thing on three different places, but when I tried it on, it was surprisingly unobtrusive.
However, this does not mean that the texture is bad, but rather that it blends in with the car body while looking closely. Oh! This is a good balance of assertiveness that is
The part that fits the cap of the largest size is good for preventing rust, especially since the bolt is exposed from the beginning.
The caps for the medium and small sizes have OEM plastic caps, but they can be easily removed by hand, so no tools are required.
However, you will need parts cleaner when you attach it, so if you do not have it, you should prepare it in advance.
Dustcloth is also GOOD because it is easy to work with.
View detail
Yoshimura!!!
First of all, it is completely different from the cheap and flimsy products sold on Ali.
I can firmly say that there is no better product than this in terms of material, design, and finishing quality.
This is a good product that will satisfy anyone looking to purchase frame cap products. -------------------------------------------------- -------- It is different from the cheap and poor products sold by Ali. You can say firmly that there is no better product about materials, designs and finishes. Anyone who wants to buy a frame cap product is a good product that is satisfactory. Powered by Google Translator
View detail
High quality product
About quality and texture Bra kvalitet About the feeling of use Products to buy together Difficulty of installationAbout quality and texture Lett og instalere About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Gode fraktpriser og godt pakket Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail