Reviews
Right Side does not fit.
[How is it used?
Frame caps are now available and purchased.
Was the one you received as per Image?
I thought it would be a little brighter Green Light.
Was the installation difficult?
The Left Side easily entered, but the Right Side did not enter completely and jumped out.
I removed it because it was going to get in the way at Brake.
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Not functionalParts.
I bought this as a measure against dirt to the part of the hole where this Parts is installed.
As a result, it was not a dirt solution.
Running in the rain, water and dirt from somewhere (Sand etc.) comes in.
Manufacturer doesn't sell it as waterproof or stain resistant either.
This was a complete misunderstanding on my part.
So it's not a functional Parts, but a custom looking product.
It is good to be Accent as Custom in appearance.
The finish etc. is very good and I can recommend it for that.
Installation is easy
However, because there is RightLeft as others are also written, it is temporary there.
It needs to be confirmed at times.
The installation instruction manual says to use a screw lock agent to prevent the screw from loosening.
It's written, but as mentioned above, water and dirt can get in to clean it.
I think that it is better not to use too strong Screw lock agent for
View detail
Quality…
Bolt bare can be covered with this product and
I am satisfied with the role and the price compared to other products.
I'm generally satisfied with the price, which I can easily afford.
However, I was honestly disappointed with the quality when I opened the product I received.
One of the two enclosed is new but has a few scratches.
On the other side, there is a Plastic BALI where it connects to the Frame.
I wonder if it was forcibly cut off during the manufacturing process. and
I was a little skeptical.
The installation itself is fine, and the scratch itself is not extremely noticeable, but
To be honest, I was disappointed with the quality and wondered if the product had been inspected. I wondered if it was inspected.
If you don't mind the Gold amount for a similar product, we will recommend another company's product.
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 1200 S
It looks great, but it won't be on the 2018 and later.
Quantity:Pair (for Left and Right) Three locations each, for a total of 6 Quantity:Set
The texture is very good for the high price.
However, the area underneath the Seat has changed shape since the 2018 model year, so it's not installable. (Not mentioned in the description, which I think is a problem.) I am in the process of applying for a return, but I'm not sure if I can return it. It's very hard for me as it's expensive.
View detail
![Frame Cap Set MV AGUSTA F4[Frame cap sets MV Agusta F4]](https://img.webike-cdn.net/catalogue/images/37768/TT334B_TT334G_TT334R_TS.jpg)
Fits: MV AGUSTA F4 1000 13-15, MV AGUSTA F4 1000R, MV AGUSTA F4 RC, MV AGUSTA F4 RR
I can not use it.
The goods are TrussFrame's Bolt fixed place (Quantity : Pair (for Left and Right) 2 places in total, 4 places in total) and Parts covered in the Shaft section of Swingarm.
Cap attached to the underside of the Frame makes Small O-ring attached, you can not install it with a skusca even if you close Bolt.
Also, although the Swingarm department can be installed, the Bolt position is bad and slightly deviates downward.
Parts I think that it is an expensive class from points, but this precision can not be used.
View detail
Plastic case of 100 yen Shop
Since it does not match the shape of what you purchased and you can not do Bolt-on according to the Instruction Manual, you purchased Aluminum Shaft separately in DIYShop and managed to do it somehow. The texture is as good as the Pill case of 100 yen shop. One Side 4,763 yen for this, 9,000 yen for Both Sides. Things you do not need, with this quality this price. Moreover, any shape mismatch is bad. The appearance after installation is tolerable, so I wonder if I felt a little better. View detail
![Frame Plug (left side) [Frame Plug (LHS)]](https://global.webike-cdn.net/photo/impression/61/61d35c01d82f0a06968358071e36c469L.jpg)
Fits: BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW HP4
Can not be installed as it is
Since it does not match the shape of what you purchased and you can not do Bolt-on according to the Instruction Manual, you purchased Aluminum Shaft separately in DIYShop and managed to do it somehow. The texture is as good as the Pill case of 100 yen shop. One Side 4,763 yen for this, 9,000 yen for Both Sides. Things you do not need, with this quality this price. Moreover, any shape mismatch is bad. The appearance after installation is tolerable, so I wonder if I felt a little better. View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Attachment is easy and the best for a one point custom.
Attachment is easy and the best for a one point custom. View detail