Reviews
One point
There are no special functions!
I think it's possible to have one point of coloring!
View detail
WR3 Frame cap
Is the texture slightly less luxurious because it is plastic?
Rubber packing is also included, so the hold feeling is perfect.
The holes are slightly larger than the holes in the frame, making it easier to remove the frame.
I chose Black, and it matched the Frame and gave me a sense of unity.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB
MORIWAKIFrame Hole Plug
Purchased for CB1300, Silver is almost unnoticeable when replaced from OEM.
If you want to make it stand out, another color is recommended.
The OEM Hole Plug has a groove on the underside.
It can be easily removed by screwing a slotted screwdriveretc. into it.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
Good looking!
Installed on gsxs1000gt
The installation process was easy.
Screw lock was applied because we were concerned about loosening of the screws due to vibration while driving.
I like it because it looks good.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
It suits you well this time too
I bought it because it looked flat, but it fits well like a Yoshimura product.
However, I am a little disappointed that the installation instructions are not friendly.
I was surprised that the installation method was different from what I thought.
I like the product itself and recommend it.
I like that the delivery is fast
I am thinking of purchasing other products from Yoshimura --------------------------------------- ------------------- I bought it with a boring part, but it goes well like Yoshimura. But I am a little disappointed because I am not kind. I was surprised that the mounting method was different from what I thought. I like the product itself. It's good because it's fast delivery I am thinking of buying it as Yoshimura with other products. Powered by Google Translator
View detail
Used for Demon150GR
[How is it used?
Demon150GRFrame Hole Cap, used as.
Was the one you received as per Image?
I have seen Frame Hole Cap replacement often in Thailand, the home of Demon150GRCustom, but I don't know which one is available,
Once again, we sought out Universal Product and took on a human-pillar challenge!
First of all, it was important to know if it would arrive or not, so I measured the size at Caliper and bought one to try it out.
I found it to be usable and ordered more for the other side, but was disappointed to find that the inside of the Wrench hole in the second item I ordered was rusted.
I gave up on returning and exchanging the product because I had to wait several months after ordering, but if the rust continues to appear, I will look for a separate Screw only.
The texture of the aluminum cut-out part is high, and the design is simple and nice.
"MADE IN ITALY" notation increases Tension.
Was the installation difficult?
The OEMPlastic cover of the Demon150GR is only held in place by tabs, so it can be easily removed by pulling it off and replacing it.
Type of size adjustment by tightening the screw, which collapses the rubber.
Can be mounted with Bolt On.
How was your experience with it?
Compared to the OEM Product, I like the increased sense of quality.
Anodized Black has a duller shine than OEM Product's chunky resin caps, which is exactly what we were aiming for.
This product is available in a number of Sizes, so if you can find one that is circular and fits the Size, it is worth a try.
I am using another Size of Gold for CYGNUS-X as well.
[Included Parts:were they on?
The product is only in the blister pack, there are no design documents etc.Included Parts:.
[Was there anything that disappointed you?
It is Rust in Screw. Other than that, it's perfect.
If I had to say so, I would say that it is difficult to change the bolt color because the screws are silver Hexagon Socket Countersunk Head Screws.
If possible, Bolt is also someone who would like to change colors.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400x, KAWASAKI Ninja250R
Nice to see ??
It looks different and stylish. A little bit of RubberGrease on the surface makes it easier to install. View detail
Dismounting Caution
Fitted to prevent moisture and for aesthetic purposes.
It has the same glossy finish as the Frame, so it has a good sense of unity.
As noted in the Instruction Manual, care should be taken when removing it because it is made of plastic and the nails are thin.
View detail
THESimple
It's not bad.
I think the Ducati Performance is better looking design-wise...
Pricey!
Once installed, it is simple and comfortable, but a little sad.
It is good for those who like simplicity.
View detail
Quality is good
As can be said for all of YOSHIMURA's products, the quality is often better than that of other companies.
I like this product and the texture.
I had to wait for a while, but I happened to be able to purchase it in stock.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Why is there no OEM Product?
The Frame hole has been on my mind since I bought the car. I would have been happy if you could have added more color selections if possible… I have installed it with color by myself a little. View detail
Hole Cap for CB1000R(2022)
Too much expensive, i would rather make same thing used by 3D printer... haha akward View detail
It takes a lot of force to fit them in.
Good appearance and texture.
I don't know if it takes hang to fit the product, but you have to put a lot of effort into it to get it to fit.
View detail
Fits: YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA MT-07
It's better than nothing.
MT is made at low cost. I wish I could have at least put this on… View detail
Could be a little tighter.
It just fits into the Frame hole. It is not so tight that you have to remove it, but it is a little loose.
Since they are dress-up parts, they give a sense of high quality.
View detail
Well made dress up part from Yoshimura
The gaping holes on the monkey frame are horrible to look at. these plugs are made well and look awesome on the bike, especially with a yoshimura exhaust to match. View detail
The finish is not so good.
I was not expecting so much from the Pivot Cover, but I bought it because I wanted to cover the Pivot hole for now.
The actual product is of foreign quality as expected.
The body is plastic, with color rings in aluminum, the surface is covered with small scratches, and the back side has BALI.
The friction of the O-ring holds the type in place, and the shallow angle makes it difficult to insert the O-ring unless it is tapped against the wood.
The design and dimensions are fine, so I put it at 4, but it is not a recommendation for those who seek the beauty of bonsai parts.
View detail
That's what MORIWAKI is all about!
It's a little hard to fit, but once you do, you'll be highly satisfied. View detail
Frame holes that are bothering you are cleared up.
I bought this to plug holes where dirt might accumulate, and it's a great dress-up.
However, since it consists of Cap (both sides) + Shaft, I think it weighs quite a bit.
It would have been nice to have something just for Cap if possible.
Also, there are several holes other than the one where this product is mounted, and I would like a product that can hide these areas well.
View detail
Installed on 21 year old GSX1300R HAYABUSA
I installed it on New Model GSX1300R HAYABUSA.
I was looking for a Cap for my Frame and found this easy to use product and bought it.
Anodized Treatment is beautiful, but Speedra's Gold color is a little light.
The color of this product is different from Gold of other products.
View detail