Reviews
Fits: HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R
Dress-up
Frame Hole Plug made by MORIWAKI.
It also comes with a helpful and detailed instruction manual.
There are just a few products listed in HONDAOEM's AttachmentCatalogue.
The quintessence is MORIWAKI!
View detail
Dress-up effect
This product covers the connection between the Frame and the Swing Arm, and can be installed in a quantity.:Pair (for Left and Right) It is easy because you only need to sandwich the Cover from the Bolt with the Bolt.
The 1000GT is not listed as an applicable model, but I got it because it has the same Frame as the S1000, so I assumed it would be able to be installed.
It was easy to install as intended. To be safe, Screw lock was applied during installation.
After installation, there is no difference between the color of the cowl and the large size, so a sense of unity has been achieved.
View detail
Price per piece
I think it would be good for a small accent.
However, if you say it is self-indulgent, it is sold in one.
Quantity:I bought it because I thought it was a good price for 1 set of 2pcs.
Quantity:Pair (for Left and Right) If you would like to have a Quantity:2pc. Set need to be bought.
I didn't see that mentioned in the WeBig, so ….
I had no choice but to buy another one when it arrived and I only had one.
It's a two-step process.
It seemed a bit expensive.
The product itself is good.
View detail
It is beautifully Anodized Finished!
It looks different but does not change anything in terms of driving. It is a recommendation for those who are obsessed with it. (_ _) m View detail
Recommendation of otherManufacturers, even if expensive.
It looks there, but it comes off easily by hand even if it is fitted in.
Other Manufacturers have Quantity on the reverse side.:Pair (for Left and Right) The shape differs in the following two cases, but this is the same.
So I think the hooking is not so good.
If the gold price were lower, it would be acceptable, but since the price is so high, it would be better to pay a little more and buy another Manufacturer.
View detail
The condition of the packaging of the product is questionable, but …
It was supposed to be new, but some of the corners had been scraped off and the substrate was visible.
Silver would not bother me at all, but since it is Red, the underlying Silver is a concern.
It may cost more, but the material of these items must be packaged individually, or there will be bound and scraping due to contact.
I would like to see quality commensurate with the price.
View detail
Compromise with Titaniumium color
[How is it used?
To hide the hole after removal of the sub-frame
Was the one you received as per Image?
As shown in the picture. Good texture.
Was the installation difficult?
It is easy to use because all you have to do is plug it in.
How was your experience with it?
Fitting good. can be Accent.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Initially, I wanted to buy another Manufacturer's product in silver tailoring.
However, we were told that production was undecided, so we had to settle for a color here that was close to ours.
Cooperative. design and color disappoint.
Other items that would be helpful
Installation Point or hang Just plug it in/Instruction Manual Yes/Easy to understand ◯/Cautions None/Items to be purchased together None/Opinions and requests to Manufacturer Silver color, Polish and Plating lineup are desired.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
It will be One Point, but not much Recommendation.
One Side is falling off as described in the other impressions. As a countermeasure, do not over-tighten the bolt, and apply a thin coat of Screw Loosening Stopper + Bond for Grip to the rubber part to prevent it from falling off. We do not recommend this product because the price is too high, but it is easy to fall off. View detail
good
It has a luxurious feel to it, but it is easy to pull off. I'm worried that it will come off when I'm running. View detail
for Right Side
Quantity:Pair (for Left and Right) I thought it was, but it is the Right Side.
If you buy two of these, you cannot put them on the Left Side.
The price seemed high for One Side.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100
Hole Plug
The hole is covered and the parenthesis is still good. If the price is a little lower, it would be even better. View detail
It's for decoration.
The Right Side fits perfectly, but the Left Side sticks out a little. View detail
Fits: DUCATI SCRAMBLER SIXTY 2, DUCATI SCRAMBLER 1100 PRO, DUCATI SCRAMBLER 1100 DARK PRO, DUCATI SCRAMBLER 1100, DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER CLASSIC, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER 1100 SPORT PRO, DUCATI SCRAMBLER 1100 SPECIAL, DUCATI SCRAMBLER 1100 SPORT, DUCATI S4RS
I couldn't install it myself.
I thought it would be easy to install, but without a solid tool, it cannot be installed.
I will bring it to Shop for installation at a later date.
View detail
Anodized color will be faded
The Anodized color will fade in UV light.
It is installed in the lower part of the vehicle, but it is not so noticeable, so I am satisfied with myself.
You just put it on, but it won't fall while driving.
View detail
Fits: KAWASAKI NINJA1000, KAWASAKI VERSYS 1000, KAWASAKI Z1000, KAWASAKI Z1000SX
I just wish it was a little thinner.
When you install it, the sticking out is a bit annoying, but it could be made a little thinner or the corners smoother. I don't know if that's a good idea because it's so cheap View detail
The hole will be filled.
The groove of the packing is too wide for the diameter of the packing, so it is not possible to push it deep enough for the rattling, and it floats a little.
It's OK to look at it from a distance, but up close it's disgusting.
MORIWAKI seems to fit in better.
View detail
Frame cap.
In fact, what is Frame cap?
Protection of the Bolt part of the Frame.
Accent on the tasteless Frame part.
At any rate, these are the Parts that are going to be bonsai-ized.
It's well made and Red's Anodized is good.
It may be a good part with or without it, but I added it to Accent around Engine.
However, the price of over $10,000 is something to think about.
View detail
Quantity:Set sales are good
I bought one point on the frame for a large small frame hole Quantity:I found only KITACO's set The Cap made of plastic is attached by NORMAL Because this is attached to the Well, it is necessary to be careful not to damage the Frame when removing it It is
View detail
I bought the S1000F product. But it seems a little lacking.
I am very happy with the product ordered and delivered quickly. But when I installed it, I saw that it was a little lacking. As you can see in the picture, one side fits perfectly, but the other side is silver and you can see the inner bolt. very little sorry I wish it was made a little deeper. The other side fits perfectly. It's easy to install and a great item for my bike. I am very happy to receive your order in a short time. But when I installed it, I saw that it was a bit lacking. As you can see in the picture, one side is perfect, one side is silver and the inside bolt is visible. It is a little bit sad. I want to make it a little deep. The other side is very fit. It is a very nice item on my bike, easy to install. translated by Google Translator View detail
It's not a good value
The Swing arm pivot was bare and I was looking for a Cover
I was fine with just Cover (Simple), but there wasn't much variety and Brand My name is firmly on it, but I had no choice but to buy it
Later on, I found out that it was another brand, with a choice of colors, simple, good texture, good price also had Reasonable products
I don't intend to replace it, but I should have looked a little more carefully
Installation is quite easy as it's just a matter of fitting it in and the texture is fine
View detail