Reviews
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
I don't know if I'd do a Repeat.
Buy Luster Ari twill weave
The overall texture is fine. However, the corners of the [Color] Clear bald? Chips? And also, the whole thing is twisted (is it inevitable for carbon products?). Therefore, when viewed from the rear of the vehicle, the rear end of the chain cover is hanging toward the center of the vehicle.
The supplied Bolt is used to join the product and the OEM Chain CoverBracket (steel, cobent shape), but the screw length is not long enough and the screw does not reach the UNut's looseness stop (the supplied BT is TrussM3×8L, but 10L is necessary).
In addition, one OEM clip was reused to attach to the Swing Arm, but the mounting hole of this product was processed with a thick wall as well as the BT, so the clip length was insufficient and could not be reused (in the end, double-sided tape was used to attach to the Swing Arm, and the Chain Cover (In the end, it was attached to the Swing Arm using double-sided tape, and the Chain Cover itself was attached to the Swing Arm using reused OEMBT in two other places, so it was judged to be large and sturdy).
Also, not related to quality, but when installing this product, the OEM Chain Cover and OEM Chain Cover Bracket must be removed (the OEM Chain Cover Bracket is reusable), and the Rivet is fixed in two places. I think it's much easier than using a drill to remove the Rivet.
Material for several units of Magical racingetc. so far.:I was more disappointed than the above points because I had been using Carbon products and purchased this product with that feeling. If it had been 10,000 cheaper, I would have been satisfied, but if the price is almost 30,000 and the quality is this high, I will refrain from buying it next time.
View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
it's the best
It is almost as good as OEMOption. View detail
Quality is on par with OEM
What made you decide to buy?
This year is Speed La's year, and I was surprised by the quality of Speed La's products, which I found out by purchasing Speed La's Dry carbon products, and I am really captivated by Speed La's products. (Lol) Following the Rear Fender and the Exhaust Cover, I also bought the Chain Guard, which I had been interested in for a long time, because it was on sale at the end of the year. (Since Speedra's Dry carbon is made by Handmade, it seems that once the stock runs out, it will take a long time for the next delivery. Owners who are thinking of purchasing it are advised to purchase it while it is still in stock).
How was your experience with it?
The material is dry carbon, which is also used in aircraft, making it stronger and lighter than the OEM Chain Guard. Dry carbon is completely different from conventional wet carbon, and is produced using the latest carbon processing technology, boasting ultra-light weight and ultra-strength. It is used in Sue Parka, F1, MotoGP, etc. (It's also used for high Motorcycle)
All Speedra products purchased this year. Twill weave/glossy is. All Instruction Manuals include All of our dry carbon products are handmade and finished. Slight variations and errors may occur." However, all the parts we purchased this year were as good as OEM and we could feel the craftsmanship of the craftsmen. All of Speedra's dry carbon products, both matte and glossy, are UV-cut, so they can withstand UV rays, which is a weak point of carbon, and can be used without worry.
Installation
In order to replace the chain guard, the footpeg was removed because there is a bolt on the reverse side of the footpeg. Also, there is a clip on the reverse side of the swing arm, so don't forget it! I think it takes about 10 minutes. I thought it would be easier to replace the Fender with the Bolt removed, so I left it off. Incidentally, the removed bolt is coated with Screw lock. It is troublesome but I removed the old Screw lock agent by Dice and applied a small amount of new Screw lock agent to complete the work.
View detail
It is well made and comes with Exactly.
With the right tools, removal and installation are easy and can be completed in less than 10 minutes.
I am about as Free as I can get footpeg.
View detail
The texture is as good as it gets.
Installed on a GSX-R1000R 2019
I bought this because I installed the Rear Fender made by SPEEDRA, and I was worried about the difference in texture from the Chain Guard made by Black resin.
I was very worried about paying this price just for the look of it, so I used some of my hard-earned Points to buy it.
Functionally, nothing has changed.
The original OEM Parts are also plastic, so the weight is the same.
What changes is the look.
By matching the material of the Rear Fender, the appearance is not so strange.
I chose the plain weave glossy, but the quality is as good as it gets.
The accuracy of the hole position etc. was perfect.
For installation, it is necessary to remove the rear wheel because there is one bolt fastening inside the Swing Arm.
We also recommend using a collar and a plastic washer to avoid the risk of cracking.
Color:Inner Diameter Conversion Aluminum Collar/900806-06
Washer：Poly Washer M8 Quantity:1 Set of 10pcs./990008
It is necessary to enlarge the hole slightly to use the above color.
It's not a product you'd want to be without, but it's not a product you'd regret buying if you wanted it.
View detail
High accuracy and Material:Carbon Style is beautiful
I bought it to reduce the weight under Spring as much as possible. It arrived within 2 days of ordering.
It's almost a snap to install, and you'd think it would take 30 minutes.
Footpeg Bracket, Heel Guard and Rear Fender are in the way of work.
I had to remove it and it took about an hour.
The Chain Guard is installed by tightening the mounting bolts of the NORMAL Chain Guard from the outside to the front and rear holes.
Just tighten the Center hole from the inside with the Push rivet, also NORMAL, and you're done.
In addition, since the Bolt of the part that was removed because it was in the way was coated with anti-rotation
It is necessary to restore it by applying a new anti-turning solution.
The product is very accurate and no additional processing was required.
I purchased a twill weave glossy to match the other Carbon parts, but
Material in comparison with other companies' products:Carbon Style is beautiful, no wrinkles or twists, I thought it was high quality.
View detail
Boltetc. for installation is missing.
The product itself can be installed with a little modification, but
Bolt is more than the listed numberQuantity:It had 2pc more in it and Nut didn't even have 1pc. in it.
I probably put Bolt and Nut in the wrong place.
I have purchased other products from this Manufacturer, but they are not as accurate.
The price of the gold is the same as other manufacturers, and I think it is better to buy other manufacturers.
View detail
Works as expected.
The OEM's plus-tickier texture gives it a more luxurious feel, and the dress-up effect is outstanding.
It may be lightened to the extent that you can see the lightness when you compare it with the Large threshold there.
I'm aiming for a casual dress-up and I'm satisfied with the result.
View detail
Cospa is good
Because the price is cheaper than the competitor's products, COSPA is outstanding considering Dry carbon. When attached with the company's Rear Fender, a feeling of unity and luxury comes out and Parenthesis has improved.
However, the mounting hole was misaligned, and some processing was necessary. The accuracy is not good.
View detail
Upper chain guard installation
OEM Plus Chicky looks bad Select Carbon.
Installation requires hole positions and mounting boss processing. In addition, Carbon made it thinner. We need to adjust the thickness with Washer etc.. The appearance looks luxurious. (^ ^ ♪
View detail