Reviews
Rear looks great!
The Rear of the Left Side of the MONKEY was lonely, so I replaced it with this product and now the Rear is Polished and looks great! (^^) /
The quality of the plating is good, not only on the front side but also on the reverse side, and the entire surface is polished.
I am glad I bought it because it is reasonably priced and looks very different.
View detail
Unify colors.
I purchased a red colored MONKEY125 and have been gradually adding red colored parts to it.
I have done handlebar and front suspension, so I decided to purchase this product for the rear suspension as well.
I was originally considering Revolution products, but was hesitant because they cost about 10,000 yen, but I was able to purchase Made by HURRICANE for almost half the price here on this site.
The Rear Sprocket Cover seems to be a little shorter than the OEM one, but it looks SMART than the OEM BlackPlastic one.
There are various colors available, so I think it is suitable for dress-up.
I was Large satisfied with the purchase and installation.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
I don't know if I'd do a Repeat.
Buy Luster Ari twill weave
The overall texture is fine. However, the corners of the [Color] Clear bald? Chips? And also, the whole thing is twisted (is it inevitable for carbon products?). Therefore, when viewed from the rear of the vehicle, the rear end of the chain cover is hanging toward the center of the vehicle.
The supplied Bolt is used to join the product and the OEM Chain CoverBracket (steel, cobent shape), but the screw length is not long enough and the screw does not reach the UNut's looseness stop (the supplied BT is TrussM3×8L, but 10L is necessary).
In addition, one OEM clip was reused to attach to the Swing Arm, but the mounting hole of this product was processed with a thick wall as well as the BT, so the clip length was insufficient and could not be reused (in the end, double-sided tape was used to attach to the Swing Arm, and the Chain Cover (In the end, it was attached to the Swing Arm using double-sided tape, and the Chain Cover itself was attached to the Swing Arm using reused OEMBT in two other places, so it was judged to be large and sturdy).
Also, not related to quality, but when installing this product, the OEM Chain Cover and OEM Chain Cover Bracket must be removed (the OEM Chain Cover Bracket is reusable), and the Rivet is fixed in two places. I think it's much easier than using a drill to remove the Rivet.
Material for several units of Magical racingetc. so far.:I was more disappointed than the above points because I had been using Carbon products and purchased this product with that feeling. If it had been 10,000 cheaper, I would have been satisfied, but if the price is almost 30,000 and the quality is this high, I will refrain from buying it next time.
View detail
make a different impression
OEM Material:Compared to PlasticChain Cover
Satisfied with improved texture
I thought it would take quite a long time to deliver because of the "made-to-order" nature of the product.
I was happy to see that it came in rather quickly.
View detail
It looks better now
It is an OEMOption product, so the quality is high.
It may seem somewhat expensive, but the improved appearance is a good thing.
However, I personally would have preferred to have no Logo in the car name.
View detail
MagicalRacing ChainCover gsxr1000
Magical racing Carbon Chain Cover (twill weave).
Along with the inner and front fender carbon replacement, the chain cover was also replaced.
It is worth replacing the rear tire, although it is necessary to remove the rear tire.
The texture was good and there was no Gap in the Screw hole, Magical racing is the quintessential Magical racing.
View detail
Genuine R&G Boot Guard Kit for MT10
As you know, if you ride with good motorcycle boots, they do have a tendancy to rub the frame in places. It's just how it is. These boot guards are a perfect addition to help prevent this and also give a good look to the frame in general. Even though you will probably never need for them to be grippy, they are anyway with a kind of sand paper feel about them. I have used R&G products before and they do know what they are doing when it comes to protection. All their products just fit, there is no having to trim anything as they make each kit specific to YOUR bike. As I already had other tank protector in the basket, I added these boot guards. Becasue I had other items in the basket for the order, the courier cost was very good value and spread out over the entire purchase. It is a lot cheaper to have more than one item to ship that having multiple items. EMS fast is the service I used this time. Their delivery is always within a week and this is even the case over a weekend. My order arrived to me in the UK in 5 days flat. All the items in my order were packed really well and neatly inside the outer box. Webike warehouse even seal the box on all the edges so nothing can be lost in transit. The package was also filled with extra bubble wrap in any empty space so there was also no damage from items moving around inside the box. All arrived 100% perfect. These boot guards are nice and flexible and easy to fit, I always mark the guards or what ever protection you against the surface I am going to attach to using a white pencil on various edges. This measn when I come to installing, I know they will be in the right place first time. Probably easier ways but this works for me. The instructions tell you to lightly heat the surface and pad with a heat gun, I found that a hairdryer did a great job as my heat gun was elsewhere. Just take your time and you will be just fine. Very happy with the final result. Brilliant, thank you Webike View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
It is easy to install.
Installation was easy. I am very satisfied with the installation, but the parenthesis has improved a lot. It would be better if it were a little cheaper. View detail
strong, solid
Among the various chain guards of Monkey 125, it is an expensive product, so the material and quality are good. I'm satisfied with the second guard change. View detail
Striker chain guard A+
Excellent quality, form and function. Slightly larger than stock, much better. Quick installation and looks 10x better. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CL50, HONDA BENLY50S
Mounted on external Swing Arm
I have an external Aluminum Swingarm mounted on my CUB and was looking for a Chain Cover since I can't use the OEM Chain case.
It also has a Mukawa R suspension. Its R suspension (06-04--0025) The product description clearly states that it can be installed on the CUB used. However, the Swing Arm is not the same as the OEM one, so I thought some modification would be necessary, but I purchased it because it is made of aluminum, which is easy to modify.
The product texture is good, the brand name is cool, and the part of the Case where the R-Thrust is likely to be hit has been cut out to be beautiful. The case is beautifully cut out where the R suspension might touch the case, and my fingers don't catch on it. The overall design is also good.
The case is mounted on the chain line, so it is different from the normal position, but it seems to be possible to mount any R suspension other than Mukawa's if it is a slim R suspension. The brand name is hidden because it is a self-made Tandem Footpeg, but there is no problem with the product itself.
Steel is inexpensive, but its drawback is that it is prone to rust. It has been six months since installation, and there is no anodized discoloration. The straight design suits the external Swing Arm.
It is aluminum and intricately made. It is a bit pricey, but I am glad I bought it.
View detail
Fashion starts from the feet up
It is easy to install.:It is aluminum, so I have no complaints. A little more expensive than other companies, but well worth it. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
COOL Chain Guard
Excellent chain protection, it gives the Honda Monkey a beautiful look, and it is also functional. I recommend it to everyone. Excellent chain guard, it gives the Honda Monkey a great look and it is also functional. I recommend to everyone. View detail
Beautiful Carbon Chain Cover.
[How is it used?
It is one of the few carbon parts of RC42, which has few custom parts as far as possible.
Was the one you received as per Image?
My first impression is that Carbon is thick. And [Color] Clear paint is beautiful. It is a quintessential Colors.
Was the installation difficult?
BoltQuantity:It is an easy 2pc replacement.
How was your experience with it?
It does not change the driving performance, but it improves the appearance.
It is not cosmetically superior, but it is high quality and satisfying.
View detail
Can be installed on GSX-S1000F without modification.
The GSX-S1000F and the unbranded models use the same swing arm as the R1000, so it can be easily attached. The installation holes are 2 bolt holes + 1 push clip, and there is no gap, so it can be replaced without removing the wheel. There are a few details such as air bubbles and some BALI on the edges, but considering the weight carbon and the price, I think it is sufficient. View detail
MONKEY125 pica.
The manufacturing is also OEM Product and Exactly and there is no problem with the plating process and there are no scratches. View detail
it's the best
It is almost as good as OEMOption. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
บังโซ่ takegawa ใส่กับสวิงอาร์มเดิมสวยครับ View detail
Fits: HONDA APE 50, HONDA XR100MOTARD, HONDA APE 100, HONDA XR50 MOTARD
Replace with OEM plastic
Replace with OEM plastic
Refreshing to look at, but not Impactful, and
I am going to try to paint it Black.
View detail