Reviews
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
Easy to install! Fit securely!
Installation is very easy, just tighten with Tie Wrap.
The brake hose is also cut to fit beautifully. The Swing Arm is now well protected and secure.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
I think it's good.
[How is it used?
Forest road Gare
Was the one you received as per Image?
as it is (i.e. now)
Was the installation difficult?
Easy
How was your experience with it?
It serves its purpose.
[Included Parts:were they on?
It comes with Sponge as a buffer.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used on crf250rally
I had a large scratch on the Swing Arm when I ran in a gully with another vehicle.
I purchased this product to reduce scratches as I have just switched vehicles.
The vehicle is CRF250RLYInitial Model.
Installation is easy
It can be installed without removing the shaft of the rear tire.
If you are not familiar with it, it is easier to remove just the nut for the Right Side Shaft.
CRC556 is also good.
The bolt to stop the chain case is too short for the OEM product. A bolt with the same pitch but 5mm longer is required.
Merit can reduce the number of scratches in the galleys.
Demerit will get sand in it, so slips will be made.
I am happy with my purchase.
View detail
Fits: BETA RR 480, BETA RR 300, BETA RR 350, BETA RR 250
Necessary Items for Off-road
I have been using it for a while and replaced it with a new one. View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
MY2023 for YZ125X
I had been using the same product on my YZ250FX, so I was torn between it and ACERBIS Magnet type, but I decided to go with this one because of its cost performance and reliability.
Installation is simple and is secured with the included thick Tie Wrap.
If mud gets into the swing arm, it can cause minor scratches on the swing arm, so it must be removed and cleaned periodically, such as after a muddy ride.
This may not be necessary for Motocross, but it is essential for Enduro if you do not want to make the Swing Arm too skinny.
View detail
I didn't get to 00.
[How is it used?
It is not compatible, but I bought it to install on my 2000 RM250.
I was expecting to be able to install it on my acquaintance's 2003 RM250, but the result was that I could not install it.
The Axle Block area of the Swing Arm was too large and I could not get into it.
Was the one you received as per Image?
It was higher quality than I expected. It has some thickness and seems to protect the Swing Arm.
Was the installation difficult?
I was unable to install it, but it comes with Tie Wrap, which can be installed by simply tightening it.
There is no need to remove the Wheel either.
How was your experience with it?
I couldn't use it. It's a pity because the product was good.
[Included Parts:were they on?
It came with a Tie Wrap and some sort of cushioning material to attach to the Swing Arm.
There was no Sticker, which is a certain Off product. Surprising.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It looks like it will be attached to RM after '03, so you can divert at your own risk.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
good quality
good quality。i love it View detail
Fits: YAMAHA WR 250F, YAMAHA WR 450F, YAMAHA YZ 125, YAMAHA YZ 250
Easy installation
Is Guard important?
Fitting Yoshi?
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
It protects the Swing Arm from rocks.
Installed because I hit the Swing Arm at a rocky area. I had to cut it down a little because it interfered with the external brake pedal. View detail
Fits: HUSQVARNA FC 450, HUSQVARNA FE 250, HUSQVARNA FC 350, HUSQVARNA FC 250, HUSQVARNA TE 250, HUSQVARNA TE 125, HUSQVARNA TC 250, HUSQVARNA TC 125, HUSQVARNA FE 450, HUSQVARNA FE 350
Thinking of preventing scratches on Swing Arm.
[How is it used?
Used with HUSQVARNA TE250. I mainly play with G650 XCOUNTRYRace.
I'm still a beginner, so I fall down a lot.
I bought this Protector to avoid scratches on the Swing Arm, which is expensive to replace, even though the exterior can't be helped.
It was listed as HuskyBlue, but I didn't know what color it was, so I was very nervous when I bought it.
It is very easy to install, and the Quantity on One Side:Fixed with 2pc Tie Wrap and Double-sided Tape (included in the product). A spare Tie Wrap is also included so you can remove it and fix it again (you will need to provide your own Tie Wrap etc. after the second time).
I haven't fallen yet with this Protector, but it seems to protect me well.
View detail
Fits: YAMAHA WR 250F, YAMAHA WR 450F, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA YZ 450F
The only choice for Swing Arm protection.
I think this is the only one made by Poly sports that currently protects the Swing Arm.
To install, hook the claws on the body and secure with the Tie Band.
I try to keep the ties as close to the inside or bottom as possible so that they don't break off in the event of a fall, and so that they don't accumulate muddy water. Be careful not to touch the Swing Arm or Chain in some places. It's a long piece, so if it comes off when driving, it's going to be hard to carry.
I haven't used it very hard, but I've used it for about 5 years.
There is a SmallWound on the surface, but there is no large crack or deformation.
I think it is Level that Off car driver doesn't mind, but it might be good to put Sponge tape between Swing Arm and Guard. By the way, I bought the same product for another car model recently, and it came with Sponge tape.
I haven't driven the car on hard muddy roads, but there is no mud left between the Swing Arm and the Guard, and the water flow from the car wash machine seems to wash it away, so I don't think I need to cut the Tie Band off and remove it every time I wash the car.
In some cases, it was difficult to turn the Nut of the Chain Adjuster because the Guard was out of place, or I needed to use the Thin Open Wrench, but the claws of the latest model have been strengthened, so it is difficult to install, but I think the fixation has been strengthened.
I think it is easy to put them together when you remove the Swing Arm.
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
Can be installed on the 2020MODEL
The swing arm length has been lengthened from the X-TRAINER2020MODEL, according to the It was Neck to be able to install, but it was no problem I think it's not View detail
Unnecessary
KTM 250EXC-F (sixdays 2017 MODEL) Attached to
I wanted to put Decal on the Swing Arm and I wanted it to be Black
Double-sided tape and Tie Wrap on the inside to attach to the Swing Arm The Tie Wrap will break, depending on the run
A MOTARD dress-up would be fine, but not for running the BALIBALIOff-road I wondered if I didn't need it
There's also mud between the Cover and Swing Arm, and the Tie Wrap has to be looked at often It's also a bit expensive
It's your choice...sort of
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Easy and reliable
Installation is very easy as it is a Tie Wrap and in the case of YZ125 it is on the swing arm There is no need to remove it because there is a hole for the maintenance hole as well I chose Black to match the BlackRim because I could choose between Black and Black, and the scratches on the Swing Arm It seems to be able to play without worrying about the stickiness I want to keep going
View detail
We're saved!
I used it on HardEnduro I installed it in order to prevent Wound because there is a gully
When I used it and looked at it after washing the car, I found a gutted Wound in the Guard, so this Parts helped me
View detail
Fits: KTM XC, KTM SX-F, KTM SX, KTM XC-F
Is Orange color like this?
POLISPORT Poly sports8456500002
With the same part number Quantity : 2 Set Order,
Did you receive the same part number
If you look inside it is a different color?
Is Orange color like this?
View detail
Fits: HUSQVARNA TC, HUSQVARNA FC, HUSQVARNA TE, HUSQVARNA FE, HUSQVARNA TX 501, HUSQVARNA FX 501, HUSQVARNA FE 501, KTM SX, KTM XC, KTM SX-F, KTM XC-F
OEM same etc. ?
Is it the same as HUSQVARNAOEM?
I listened to OEM and tried it
Feeling looked at OEM and the like. I think
I am going to install it, but I hope to install it.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
The display of compatible model - - -
Since I did not have WR 250 F 08 in the conforming model, I bought it with only 8 cars. I was able to install it smoothly without machining pearls. The compatible model which can be confirmed at the time of purchase and the compatible model which is described in the product were different. It is 100 points perfect if it is stated securely! View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Function is perfect! I think that looks will be divided into preferences
I saw Swingarm's scratch prevention Items.
There is no complaint at all in function. There was nothing to do but I could install it smoothly.
However, it seems that the appearance is divided into preferences?
I planned to paste SwingarmSticker before purchase, but it is difficult to match with color (Because there is no Sense) So I gave up..
Since the surface of the product is matt finished, I think the texture is good.
View detail
Large This is a funny product.
Swingarm's Wound is absolutely attached so I think that it is a good product because it can prevent it.
I am attached since the beginning so I am relieved.
View detail