Reviews
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
Easy to install! Fit securely!
Installation is very easy, just tighten with Tie Wrap.
The brake hose is also cut to fit beautifully. The Swing Arm is now well protected and secure.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
I think it's good.
[How is it used?
Forest road Gare
Was the one you received as per Image?
as it is (i.e. now)
Was the installation difficult?
Easy
How was your experience with it?
It serves its purpose.
[Included Parts:were they on?
It comes with Sponge as a buffer.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used on crf250rally
I had a large scratch on the Swing Arm when I ran in a gully with another vehicle.
I purchased this product to reduce scratches as I have just switched vehicles.
The vehicle is CRF250RLYInitial Model.
Installation is easy
It can be installed without removing the shaft of the rear tire.
If you are not familiar with it, it is easier to remove just the nut for the Right Side Shaft.
CRC556 is also good.
The bolt to stop the chain case is too short for the OEM product. A bolt with the same pitch but 5mm longer is required.
Merit can reduce the number of scratches in the galleys.
Demerit will get sand in it, so slips will be made.
I am happy with my purchase.
View detail
Fits: BETA RR 480, BETA RR 300, BETA RR 350, BETA RR 250
Necessary Items for Off-road
I have been using it for a while and replaced it with a new one. View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
MY2023 for YZ125X
I had been using the same product on my YZ250FX, so I was torn between it and ACERBIS Magnet type, but I decided to go with this one because of its cost performance and reliability.
Installation is simple and is secured with the included thick Tie Wrap.
If mud gets into the swing arm, it can cause minor scratches on the swing arm, so it must be removed and cleaned periodically, such as after a muddy ride.
This may not be necessary for Motocross, but it is essential for Enduro if you do not want to make the Swing Arm too skinny.
View detail
Fits: BETA RR2T 125, BETA RR2T 125RC, BETA RR2T 200, BETA RR2T 200RC, BETA RR2T 250, BETA RR2T 250RC, BETA RR2T 300, BETA RR2T 300RC, BETA RR2T 250X-TRAINER, BETA RR2T 300X-TRAINER, BETA RR4T 350, BETA RR4T 350RC, BETA RR4T 390, BETA RR4T 390RC, BETA RR4T 430, BETA RR4T 430RC, BETA RR4T 480, BETA RR4T 480RC
Great fit! Perfect protection!
Got them installed in 5 minutes or less,i use im so glad i had them on otherwise i think i would have some good gouges in my swing arm. These are a must if you ride in rocky areas these will save the rock gouges for the ware part and not your bike. fit tight to the swing arm and have protected it from a few sharp rocks already! Definitely recommend for those in the woods like I am or those looking to add some rub protection for the track, and a few style points along the way.I was surprised however and how great these things look on the bike. And they seem like very good quality. View detail
Fits: KTM 125 EXC, KTM 125 XC-W, KTM 150 XC-W, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 300XC-W, KTM 250XC-W, KTM 250EXC
ktm250exc f six dayz
The Sense of Size is JUST!
Left SideChain Slider?
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
good quality
good quality。i love it View detail
Fits: YAMAHA WR 250F, YAMAHA WR 450F, YAMAHA YZ 125, YAMAHA YZ 250
Easy installation
Is Guard important?
Fitting Yoshi?
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
It protects the Swing Arm from rocks.
Installed because I hit the Swing Arm at a rocky area. I had to cut it down a little because it interfered with the external brake pedal. View detail
Fits: HUSQVARNA FC 450, HUSQVARNA FE 250, HUSQVARNA FC 350, HUSQVARNA FC 250, HUSQVARNA TE 250, HUSQVARNA TE 125, HUSQVARNA TC 250, HUSQVARNA TC 125, HUSQVARNA FE 450, HUSQVARNA FE 350
Thinking of preventing scratches on Swing Arm.
[How is it used?
Used with HUSQVARNA TE250. I mainly play with G650 XCOUNTRYRace.
I'm still a beginner, so I fall down a lot.
I bought this Protector to avoid scratches on the Swing Arm, which is expensive to replace, even though the exterior can't be helped.
It was listed as HuskyBlue, but I didn't know what color it was, so I was very nervous when I bought it.
It is very easy to install, and the Quantity on One Side:Fixed with 2pc Tie Wrap and Double-sided Tape (included in the product). A spare Tie Wrap is also included so you can remove it and fix it again (you will need to provide your own Tie Wrap etc. after the second time).
I haven't fallen yet with this Protector, but it seems to protect me well.
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
Can be installed on the 2020MODEL
The swing arm length has been lengthened from the X-TRAINER2020MODEL, according to the It was Neck to be able to install, but it was no problem I think it's not View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Easy and reliable
Installation is very easy as it is a Tie Wrap and in the case of YZ125 it is on the swing arm There is no need to remove it because there is a hole for the maintenance hole as well I chose Black to match the BlackRim because I could choose between Black and Black, and the scratches on the Swing Arm It seems to be able to play without worrying about the stickiness I want to keep going
View detail
Fits: HUSQVARNA TC, HUSQVARNA FC, HUSQVARNA TE, HUSQVARNA FE, HUSQVARNA TX 501, HUSQVARNA FX 501, HUSQVARNA FE 501, KTM SX, KTM XC, KTM SX-F, KTM XC-F
OEM same etc. ?
Is it the same as HUSQVARNAOEM?
I listened to OEM and tried it
Feeling looked at OEM and the like. I think
I am going to install it, but I hope to install it.
View detail
Large This is a funny product.
Swingarm's Wound is absolutely attached so I think that it is a good product because it can prevent it.
I am attached since the beginning so I am relieved.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Swingarm will not hurt!
It is KTM's PowerParts and etc..
As Enduro gets scratched on Swingarm, it is a feeling to let Cover at Plastic to prevent it.
As far as I know, there is only here for WR.
View detail
Fits: DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748
The reason for having chosen this product is from the height of that the under chain guard is attached and the reliability of having used various delight products until now. When actually attached, the hole site of fitting, etc. were perfection. T
The reason for having chosen this product is from the height of that the under chain guard is attached and the reliability of having used various delight products until now.
When actually attached, the hole site of fitting, etc. were perfection.
The cantilever swing arm which is also a highlight on the left-hand side of a car body became tight, and it came to be visible, and is very much satisfied.
A price also thinks that it is handy and it is goods which we can recommend to you.
View detail