Reviews
Custom and Face looks great!
[How is it used?
Stand out and be great!
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy if you are self custom in a certain way.
How was your experience with it?
Looks good, tight and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The product is a little thin, so a little more reduction in cost would be better.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I recommend it for the low price.
It is a good product in terms of practical design and low price.
If the product is not installed properly due to shaking due to a large impact, it may come off or become distorted.
We recommend that you use this product at first and then exchange it for another product later.
In terms of appearance, this is a recommended product.
-------------------------------------------------- -------- It is a decent product in terms of practical design and inexpensive. If the product is not properly mounted through a big shock, it may be missing or distorted if the product is not mounted properly. At first, I recommend using it as this product and later exchanged to other products. It is recommended in appearance. Powered by Google Translator
View detail
Customized
I don't know how effective it is, but it gives a custom feeling. The quality is as expected. View detail
Refreshing
After replacing the rear suspension, it became difficult to install the OEM ducts, so I was running with the ducts upside down, but the parenthesis was not good, so I purchased this product. The installation was so easy that it was a no-brainer. I wish the price was a little lower.
I am not sure of the effect at all, but I am satisfied with the appearance of the Refreshing together.
View detail
Good product, although a little color-mismatched.
[How is it used?
Used with Endurance's RearLongCarrier.
Duct toward Carrier is gone and Refreshing.
Was the one you received as per Image?
Generally YES, but I was disappointed that the Material is TPU and the color is a little different from the Air cleanerBox on the car body side.
Was the installation difficult?
It is easy to pull out the OEMDuct and replace it, but it is Large strange to fit it into the groove because of the low elasticity of the Duct in cold weather.
How was your experience with it?
I am glad that the Style Refreshing did what it was intended to do. Also, as a side effect, my car body (with High Camshaft) Then, I could hear the intake sound a little more and the blow-off seemed to be better.
[Included Parts:were they on?
Instruction Manual only.
[Was there anything that disappointed you?
Difference in color tone due to Material.
It would have been nice if the material and color were similar to the Air cleanerBox, so it would have felt more integrated.
View detail
ZEAT ConversionDuct
I had installed Air FilterCap 8FT WEEKEND in the past, but the quality of the product was not good, and I was concerned about the intake noise while driving and did not feel the cost performance was very good.:I am satisfied with the set-up, size, and design, and the performance is good and the intake noise is not bothersome, making the car comfortable to drive. View detail
Fits: BMW R nineT Urban GS, BMW R nineT Scrambler, BMW R nineT Roadster, BMW R nineT Racer, BMW R nineT Pure
Changed from Wonderlich
[How is it used?
I had a Wonderlich Air Intake Guard on it.
I was concerned that the Air Intake Cover, which has a Large Guard circumference, was floating away from the Gas Tank.
I replaced it with one from UnitGarage, which seems to have a Small outer circumference.
Was the one you received as per Image?
The price is about 2.5 times the quintessential price, so it is a good, solid product.
I think it is bad in terms of Cost performance, since it is no different from Wonderlich's in terms of appearance.
Was the installation difficult?
It is very easy as shown in the pictures.
Even beginners can install it.
How was your experience with it?
It looks so much better.
[Included Parts:were they on?
Everything is included, so installation is easy.
Instructions are included, but they are all in the English version.
[Was there anything that disappointed you?
IntakeCover and interference does occur.
I guess it can't be helped that IntakeCover floats a bit - I'm not sure.
If you are concerned about it, you might want to look for something different.
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Pure, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT /5
Together with oil cooler guard
I had it put on along with the oil cooler guard when I took delivery of the car.
I know it has an Air cleaner inside.
I had it installed because I thought it would be a little too large for my mental health.
I went with Wonderlich because it combines the Oil cooler guard and Brand.
There was no deep meaning.
I could have chosen a few more, though.
I am fully satisfied.
Others have mentioned interference.
I don't know because I left the installation to the dealer.
If you are concerned about this, you may want to choose another company since it is available from other companies.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
If you consider the cost, it's a huge profit, but if you think about it, it's Premium.
The installation of the Ram Air Duct itself is not so much simple as it is a self-fulfilling testament to the fact that the OEM opening has been modified instead of the PowerDuct made by Trickster. It is a true symbol. View detail
Sound has changed. Horsepower is...
There seem to be a lot of people in the 25R area who have it on, and I bought it to experience the difference in sound.
Horsepower isn't a concern for me right now.
Tuning is done by Computer at the stage of completion of this kind of custom set.
We will leave it until then.
The sound certainly changed and became a little more powerful. I am fairly satisfied.
However, the sound change is more than the increased intake Image.
The resonant sound of Duct's Body seems to have become Large.
It can only be enjoyed at low speeds.
As for horsepower, I pulled it down to Peak power.
Both Normal muffler and AKRAPOVICRacing line
We have not felt any change.
With the AXIS Lapo, it seems to blow up just a little smoother.
I am not too sure. On the contrary, there is no Minus factor at all.
Regarding installation, the Instruction Manual seems a bit clunky.
It is difficult to have a problem because the object is simple, but in the case of more complex objects, it is difficult to have a problem.
Is Large sturdy with such a flippant explanation? I felt that it was.
For example, if the Tape is to be placed in a position where Leave a gap here." It is stated that
It doesn't say anything about how much space you're going to leave available, nor does it say anything about numbers or objectives.
The image is hard to see because the gaps are painted over with a thick red pen, and the
It is said to be an OEM well nut diversion, but in reality it may not be possible.
(You can remove it, but you have to push it in to reattach it next time.
(The strength and elasticity of the material is unknown, so forcible insertion may result in damage.)
View detail
I don't think you'll notice the effect on city driving...
I don't know if I increased the horsepower or not. The intake sound is a little larger than before. It took some time to remove the cowl, but it was no problem. View detail
Purchased in conjunction with IntakeDuct replacement
Purchased with the introduction of PowerIntakeDuct.
Attach to the inside of the Front cowl with Double-sided Tape.
Slightly misaligned, interfering with Cowl...
I fine-tuned the Double-sided Tape to be thicker.
If anything, Color:It is a Gray color and stands out more than OEM, but the texture is good and I am satisfied.
View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX
Switch to Carbon!
Change to Carbon duct.
I don't know if it's just my imagination or if the intake sound is a little bit larger or if it's resonating in the duct, but…
At any rate, it became a low sound echoing with the sound of the Exhaust System.
And then there's the look.
The price was also the best, although this was not so cool and the pattern of Carbon twill shibori was beautiful and my favorite.
The installation was a little tricky, but I was able to do it without any modification.
View detail
Increased horsepower is very attractive, isn't it?
The volume seems to have increased a little.
I'm not Racer, so I don't know the rest.
I don't have a Rapid and my exhaust system is AXIS labs...
View detail
It's a must for PowerIntakeDuct.
It is indispensable because it is a governor after installing PowerIntakeDuct without this. View detail
It looks good.
I bought it as if I could blow air efficiently even a little. As for installation, since it was changed to Oil cooler of Other Company Product, it became a slightly different mounting method from the manual, but it was able to install without problems. Material : Titanium makes it thin and has good texture. I feel that split feeling high, but I think that it is functional product if it is a functional product. Of course there is no complaint. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA BWS125(BWS)
To BWS 125 SEA 6 J
At first I was looking for Fan cover, but there are many things that clearly fit or not written
I was procrastinating.
I accidentally found this item and it seems to be OK so I bought it.
Very Parenthesis is good.
We also exchanged Lightweight Cooling Fan together.
View detail
Air duct cover installation
SSK 's Air duct cover is lower in price and better in shape than other products. The installation requires ingenuity so as not to be scratched, and if it does not get used it takes about 2 hours. If you are not confident in assembling it would be better to ask DeLar to do it. After installation the appearance of luxury is considerably UP.
There is considerable degree of satisfaction as it gets to notice when driving.
View detail
They were a feeling of a Fit, appearance, and a both very satisfactory thing however, breathing came to be seen [ whether the suction amount decreased and ] in a high rotation area. It has in a Circuit or high speed operation, and is deep.
They were a feeling of a Fit, appearance, and a both very satisfactory thing however, breathing came to be seen [ whether the suction amount decreased and ] in a high rotation area. It has in a Circuit or high speed operation, and is deep. View detail
Since carbon parts were introduced little by little, the front duct was also changed into the thing of the a-tech. An opening spreads and I think that the charging efficiency of a ramair is increasing. If it also became a weight saving since it wa
Since carbon parts were introduced little by little, the front duct was also changed into the thing of the a-tech.
An opening spreads and I think that the charging efficiency of a ramair is increasing.
If it also became a weight saving since it was light compared with normal, the problem was the work which is not when ? attachment was delayed for a while although an upper or Ur is removed, but spending many hours.
If it attaches, a carbon design looks nonchalant and it is quite actually cool! The same front face as everybody is recommended in the direction that I am disagreeable.
View detail