Reviews
The accuracy of the OEM Product and the atmosphere of the Parts themselves are good!
Compared to other brand products made in China, this is an OEM product, so the accuracy is number one! If a small rock hits the surface, it will not prevent damage to the light surface because the gap is too large. And the price may be high. Still, it is self-satisfaction to put OEM on the product. View detail
SP TAKEGAWA Headlight Guard Review
Suitable for CT125 model. I like it because it’s not clunky. Installation is not difficult.
You can think of it as having no guard role. Just think of it as investing in tuning.
Since it is not thick, I don't think it will be significantly involved when installing the front carrier and windscreen.
The price is a bit expensive, but it's well worth it. -------------------------------------------------- -------- Suitable for the CT125 model. It is good because it is not clunky. It is not difficult to install. There is no guard role. You can just think about investing in tuning. It's not thick, so I don't think it's not much involved when installing front carriers and windscreens. The price is expensive, but it's worth it. Powered by Google Translator
View detail
Fits: HONDA CL250, HONDA CL500, HONDA REBEL250, HONDA REBEL500, HONDA REBEL1100
SP Takegawa SPTakegawa Headlight guard
appearance
The Wilde feeling was up and the texture was nice.
View detail
Dirt-style Custom
It is easy to install. It is easy to install. It is the perfect item to distinguish yourself from others. View detail
Fits: HONDA CL250, HONDA CL500, HONDA REBEL250, HONDA REBEL500, HONDA REBEL1100
Parenthesis is good. Good texture.
I bought this product not to protect the headlight lens, but to eliminate the rebel feeling around the headlight area. (Personal opinion) I have installed several SP Mukawa products in other parts, but SP Mukawa products are of high quality. View detail
Looks good
The Headlight Grill frpm Hepco&Becker I purchased arrived a bit deformed, squashed (happened during shipping to my destination?) Before installing it, i had to straighten it out to fit the headlight accordingly. All in all a solid piece and it looks good. View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
2021 Monkey 125 Headlight Guard
Shipping is fast, but the customs office takes a long time.
It's not cheap junk from Ali, but it's very sturdy and sturdy, so it's well made.
It does not look excessive and goes well with the monkey headlights, and it does not block the low visibility of the headlights.
Thanks for the good stuff. ------------------------------------------------------------ -------- Delivery is fast, but it takes a long time by the Korea Customs Service. It's not a cheap season sold by Ali, but it's very strong and great. It doesn't look over, and it goes well with Monkey headlights, and it's good to evaluate because it doesn't have a weak headlight. Thank you for good things. Powered by Google Translator
View detail
For light protection and dress-up
good point
Light can be protected
... be cool.
A bad point
Light gets a little darker.
Installation was easy after reading the Instruction Manual.
However, since the light influence on the light is large depending on the installation angle, it is necessary to work while confirming the angle of installation.
It comes with a polycarbonate board, so it can be protected from small flying stones. The board can be purchased as a Single Body, so you can rest assured.
View detail
Dress-up
I think the purpose of this is to protect the headlight from mud, stepping stones, tree branches, grass, etc., but in reality, I think the dress-up effect is much larger. It's just a small part, but I think it looks much better. View detail
The quality is okay, you get what you pay for
The guard fits well with the headlight, the outlook beats other brands', that is for sure. The installation is extremely easy, it only took me 5mins. And I am sure the plastic cover will do a descent job in protecting the light. However, the quality is just okay, I had to sand the entire guard again because there were many steel burrs, but it's okay for those who are fond of handcrafting. I resprayed the guard in camouflage green since it fits my bike better. All in all, I am satisfied with the final result. View detail
cute little
I'm very happy with this product. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110 (Model 2BJ-JA45), HONDA CROSS CUB50(Model 2BH-AA06)
I hope it looks good!
I installed it from the aspect of headlight protection. It is easy to install and I feel that it doesn't affect the illumination of the Light too much when driving at night. View detail
Better/Bad
The fitment was for the NORMAL CRF1000L, but since the mounting part was the same shape, it was installed on the AdventureSports.
The Bracket is solid and does not shake due to vibration.
The lens is also made of thick and sturdy material, so you don't have to worry about it breaking if a small stone hits it, and the transparency of the lens is high, so the light doesn't get dark or the optical axis doesn't scatter in the day after tomorrow.
Even from a distance, you don't feel like you're wearing a Protector, and it fits in SMART.
The only thing that bothered me was that it was hard to remove the Lens when I wanted to wipe the back of it.
The thing of the other manufacturer is Quick Release, and it has become easy to remove, but this has to remove 4 places of the pole SmallScrew.
If it is only to remove the screw, it is not enough, but two pieces of plastic washer are bound to one screw by Nut, and if it is removed without knowing the existence of Washer, it will be lost.
You can also set the bottom of the Bracket to Quantity:It is fixed to the frame with 2pc bolts, but the supplied bolts are longer than necessary, and they touch the inner cowl at the top of the bolts.
Because it is Cowl of the part which is not seen so much, a little Damage can be meditated, but it is good luck to prepare Bolt by oneself if it is concerned.
View detail
Off-road feeling up!
I bought it for Off-road feeling UP. There are many similar ones out there, and I looked for the cheapest Type.
The turning stopper is a little bit out of dimension and it doesn't fit in the hole but bites into the frame. Once you put it on, it's rare to take it off, so I don't think it's a problem... (laughs)
View detail
Dress-up with a good outdoor feeling
【Motivation or reason for choosing or purchasing
I was looking for a headlight guard mainly for dress-up purposes and found this product which is just right without being too off-road smelling.
I rarely drive on surfaces with bouncing stones and didn't really expect it to function as a Guard.
In addition, because Pipe comes in front of Light though it is thin, the irradiation ability becomes uneasy if there are too many.
When installing
One of the good points common to all KITACO products is that the installation manual is designed to be easy for the operator to understand, so I had no trouble.
Even if I worked slowly and carefully, it took about 15 minutes to install.
Also, as mentioned in the manual, there is a part where the bracket sticks out, so it would be better to cover it with a curing tape to avoid scratching the painted surface of the Both Sides.
[Fit & Feel]
It has become the appearance that meets the purpose of the moderate Outdoor feeling Up.
If I were to compare it to a four-wheeled vehicle, it would be like a two-wheel-drive SUV instead of a four-wheel-drive Black Can.
The front carrier also increases the area of the BlackParts, so it looks more tidy.
View detail
Koch installed it with no problems, and the GCraft stigma is cleared?
GCraft two items & omega;
The AdjustableWideSide Stand gave me a hard time, so I got defensive, but the Kochs were installed with surprising ease and ease, and the omega;
Remove the mounting bolts (HEX5mm×4) next to the headlight and put the collar in and fix the bolts (HEX4mm×4).
Well, it's not a bad Style.
I don't want to rear-end and I don't think I'll ever go off hard, so I think the Main is a handle for something.
View detail
Fits: HARLEY-DAVIDSON STREET750, HARLEY-DAVIDSON FXD DYNA SUPER GLIDE, HARLEY-DAVIDSON FXDB DYNA STREET BOB, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM, HARLEY-DAVIDSON SPORTSTER XL 1200L LOW, HARLEY-DAVIDSON XL 1200T SUPERLOW 1200T, HARLEY-DAVIDSON XL 1200X FOURTY-EIGHT, HARLEY-DAVIDSON XL 883R 883 ROADSTER, HARLEY-DAVIDSON XL 883L SUPER LOW, HARLEY-DAVIDSON XL SPORTSTER 1200L LOW, HARLEY-DAVIDSON XL SPORTSTER 1200R ROADSTER, HARLEY-DAVIDSON XL SPORTSTER 883, HARLEY-DAVIDSON XL SPORTSTER 883L LOW, HARLEY-DAVIDSON XL1200CX ROADSTER, HARLEY-DAVIDSON XL SPORTSTER 883R, HARLEY-DAVIDSON XL1200T SUPERLOW 1200T, HARLEY-DAVIDSON FXDL DYNA LOW RIDER, HARLEY-DAVIDSON FXSB SOFTAIL BREAKOUT, HARLEY-DAVIDSON FXDWG DYNA WIDE GLIDE, HARLEY-DAVIDSON XL1200XS FORTY-EIGHT SPECIAL
nice product
fits well, easy to install, very nice. probably the only headlight grill that fits xg750 on market. It does its job! Recommended View detail
Caution! It is made of Polycarbonate.
The illuminated part of the light is made of Polycarbonate. It is recommended not to use any kind of screw lock agent. I got cracks here and there soon after using it.
As for the installation, it took me a while to install because the Bolt in the Light comes off easily. However, the quality is high and overall I am satisfied with this product.
View detail
For Dress-up rather than practicality
It has almost no practicality in terms of protecting the Headlight, which goes without saying
It should be separated from Dress-upItems
The build and installation is solid, so it doesn't seem to come off while driving
The protrusion of the mount part rubs against the body of the car when you install it, and it is easy to get scratches on the body of the car We recommend that you cure it before working on it
View detail
OK
Installation is very easy. I do not know the strength well, but it looks better. I have not met SEROW with this yet. View detail