Reviews
Due to budget constraints...let's start with Shroud.
[How is it used?
I wanted to Refresh Shroud, which was full of scuffs and scratches and was given to me by a friend, It's OEM Decal." I purchased a Graphic decal made of MDF, which is less uncomfortable to say.
It was too tight for my budget to buy a full set, so I decided to buy a quantity this time.:Pair (for Left and Right) Only the Shroud section of the
Did you receive the item as per the Image?
Decal is thinner than FACTORY EFFEX, but slightly thicker than OEMDecal, and is expected to be more durable.
MDF's Decal system was previously used for KLX125 and RimDecal, so I have a sense of security.
The product was just as per Image with just the right design, not too flashy and not too plain.
Was it difficult to install?
This kind of work... has a strong sense of tedious work rather than difficult work, and I am Quantity:Pair (for Left and Right) It took about half a day just to apply two sheets, including the adjustment of the position of the "A" and "B".
If you are familiar with the process, you may be able to do it in 30 minutes~1 hour.
How did you like it?
The decals are of high quality with no gapping of the molds.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) It is easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere without any problem even on top of scratches on the shroud, etc., and the difference between the scratches is not noticeable, making it ideal for concealing wounds. (This does not apply to deep gouging Woundetc.) 。
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
No personal.
Although the pasting process is a little Large strange when you are not used to it, the hard work will be rewarded when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. I think you can work with even more confidence if you check out the video by searching for (MDF's video is also attached around the middle of Webike's product introduction section) 。
[Availability and clarity of the Instruction Manual
Instruction Manual is included with illustrations.
But as I mentioned above, if you watch the video and then take on the challenge, you won't need the Instruction Manual.
[Notes]
Object to be pasted (Shroud and Side coverretc.). Clean and degrease the surface of the "P" before attaching it.
The rest of the work should be done as described above, referring to the video.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
I am fully aware that it is a good product, but it would be even easier to purchase if it were a little cheaper.
View detail
I appreciate that they can be purchased individually.
[How is it used?
This product was purchased to refresh WR250R, which has more Small scratches due to playing in the mountains.
Decals for each Part are sold individually, so you can choose the Quantity:I appreciate the ease of being able to purchase Sets and RoseRose.
Was the one you received as per Image?
The thickness of Decal is a little thicker than OEM, so it is easy to apply and seems to be durable enough, which is promising.
The product was just as in Image with good design and color.
Was the installation difficult?
More than difficult. "A tedious process." Sense is strong and Sense and patience are tested.
I don't have Sense, so I had to work only with patience and it took me about an hour just to put it on the Swing Arm...
How was your experience with it?
The decal was finished to my great satisfaction, with no gapping of the mold and high quality of the decal.
The Decal itself is also durable, so there is no tearing or peeling after a few falls (although it is hard to hit obstacles because of the Swing Arm where the Decal is attached).
It has high adhesive strength, and if it is applied firmly at first, it can withstand the water pressure of high-pressure washers better than OEMDecal (it is not absolutely impossible to peel off. Please keep in mind moderate use), making it easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is strong, so if there are some scratches on the exterior, etc., it will adhere without problems (to a certain degree), so it is good for concealing Wound.
[Included Parts:were they on?
Instruction Manual for Decal and pasting is enclosed.
[Was there anything that disappointed you?
The hard work is rewarded when you see the exterior of the product after it has been applied.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
MDF has a YouTube video site that shows how to apply Decal (you can also check Webike's product introduction section), so you can work with more confidence if you watch the video before you start the process.
[Availability and clarity of the Instruction Manual
As mentioned above, an Instruction Manual on how to apply the paste is enclosed.
Well, I don't think you need Instruction Manual if you watch the video before taking on the challenge.
[Notes]
The surface of the object to be applied must be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
I think you can work smoothly if you have parts cleaner, silicon-off, etc., chemical for degreasing, spray bottle for spraying, rubber spatula for degassing and dehydration, etc.
[Opinions and requests to Manufacturer
Quantity:I would appreciate a little more savings on the purchase of Set, please.
View detail
Very grateful for bulk sales.
I bought a full set of Attacker model some years ago and
When I put it on my XG250 TRICKER, the impression was completely changed and tightened up.
I liked it very much.
A plastic part of the Tail cracked while driving on a forest road.
License Plate can no longer be installed.
I had to replace it with an Assy, so I bought it again.
It would be nice to be able to sell only the parts we need in bulk.
XG250 TRICKER has been discontinued for several years now, so I don't know how long they will carry it.
The Sticker on the Fork and Swing Arm is also in question, so I will try to repair it when the time comes.
The initial investment is high, but it is partially replaceable.
It is cosmetic in the sense that it can be used for a long time.
View detail
High quality and OEM-like cohesiveness.
[How is it used?
I bought a used KLX125 exterior for mountain fun, but it was only black, and I wanted to put some decal on it, Bloody." Fire a." A Tucker." and three types of GraphicPattern, this time A Tucker." I ordered a
Was the one you received as per Image?
I purchased the product as shown in the image because I checked each Pattern on MDF's website, where there are images of the product pasted on each vehicle.
Was the installation difficult?
・・・To be honest, it is a tedious process.
1. thoroughly clean and degrease the object to be affixed.
2. Fill the empty bottle of the spray gun with diluted neutral detergent solution water and spray it evenly on the surface of the object to be pasted.
Peel off the Decal from the backing paper and place it on the object in place.
4. push out the neutral detergent water between the object and the decal with Rubber spatulaetc. after finishing correcting the position.
5. Decal that floats on the surface is lightly roasted with a dryer or the like to make it adhere to the surface.
6. When you get a good feel for 4 and 5, proceed to the next Decal work.
After the work is completed, leave Decal until the adhesion of the glue surface is stabilized, and then install it on the vehicle.
It is difficult to understand in writing, so please watch the video of the work on MDF's Site or check the videos on YouTubeetc.
I worked on it while referring to the video of the work on MDF's Site,
How was your experience with it?
The joy after the hard work of pasting is unmatched.
Especially in my case, relatively docile. A Tucker." MODEL was chosen, so after the work was completed Was this Coloring's MODEL from Manufacturer?" It is so uncomfortably integrated that it seems like a good idea.
[Included Parts:were they on?
Decal and Instruction Manual for the application work are included.
[Was there anything that disappointed you?
It is not a disappointing point, but the difficulty at the time of pasting and the cohesiveness after the completion of the project. It's harder to play in the mountains." There is a point.
Other items that would be helpful
Point and hang of installation
As I mentioned above, the best way is to check it out on video.
My personal opinion is. We'll take our time and work our way through it." is hang? I think so.
[Availability and clarity of the Instruction Manual
Instruction Manual is included in the package, but I think it is faster and easier to understand by watching the video.
[Notes]
You may want to work in a tidy indoor area, as you will want to cry if grease or dust gets on the gluing surface.
[ITEMS TO BUY TOGETHER
Rubber spatula makes draining easier, so it is a good idea to purchase one at 100-yen stores, etc.
[Opinions and requests to Manufacturer
Please continue sales for vehicles that have been discontinued as much as possible.
View detail
Parenthesis is even better than I imagined!
[How is it used?
Purchased for makeover of vehicle body.
Was the one you received as per Image?
It was thicker and more solid than I expected.
Was the installation difficult?
I think it takes time, tools, and sukill to paste it nicely.
How was your experience with it?
I am very satisfied with the "Large" product, which is much more immeasurable than I had imagined.
[Included Parts:were they on?
We recommend purchasing Squeegee separately.
View detail
The appearance became Beauty.
I bought it because my previous Decal was faded and scratched and falling apart, and I didn't have Squeegee ready, just a misting spray and Dryer, which resulted in a lot of air bubbles, but I'm glad because it turned out Beauty from a distance.
The texture of the decal is very good, and the instruction manual is very thorough. The rest is up to the dexterity level and the quantity level.:Pair (for Left and Right) I think it will be done.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Wonderful
It finishes beautifully.
Instruction Manual is included so you can work with confidence.
View detail
Beautifully finished.
If you work carefully, you can get a beautiful finish. View detail
Curved surfaces are difficult
The place you are curving will have a bit of hang.
It is easy once you get used to it, and if you work carefully, you can get a beautiful finish.
View detail
Curved surfaces are difficult
Decal is easy to apply, but Fork Guard has a subtle curved surface that makes it difficult.
I managed to get it clean by repeatedly warming it up with a heat gun while removing wrinkles little by little.
The product is of very high quality, and after installation it creates a good atmosphere for Parenthesis.
View detail
easy to stick to
The instruction manual is included in the package, so if you follow the instructions, you will not make any mistakes.
It is a good quality Decal, so it goes on beautifully and lasts a long time.
View detail
High quality.
We are reupholstering the old ones because they are out of date.
It is very easy to tension and thick, making it very durable.
It can be easily adapted to curved surfaces by heating it with a heat gun.
A detailed Instruction Manual is included in the package.
If you follow the instruction manual, you will not fail.
View detail
Attached to 2005 D TrackerSwing Arm
[How is it used?
Attached to a 2005 D TrackerSwing Arm.
I bought it because I wanted to increase the protection of the Swing Arm and the black part of the Swing Arm in terms of appearance, with a view to competing in the Motard race.
It has been in use for about four years.
Was the one you received as per Image?
As per Image. black and red Contrast is good and I felt that the appearance will be as I like.
We also felt that the Decal itself would provide good protection for the Swing Arm due to its thick wall.
Was the installation difficult?
It is not a difficult task if water pasting is done. If you have a Squeegee, you can paste on Beauty with a high probability.
If you do not do the above or cannot prepare the above, you need to concentrate on the application and carefully apply it so that air bubbles do not form.
How was your experience with it?
After about 4 years of use, Decal stuck firmly and protected the Swing Arm well without peeling.
The Decal itself is also sturdy and large enough that it has never been torn or damaged in any way.
Also, the appearance of the Large change was improved, and I was satisfied with the Large change without any color fading.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
sprinkling
wipe off the fog (about 300 ml empty Spray bottle) and neutral detergent and water.
A drop or two of neutral detergent is OK; add it to the misting cloth along with water. Fill the water to the brim.
Lightly dampen the paste surface and Decal with a mist wipe.
Then, paste them together. At this time, it is best to avoid air bubbles as much as possible, so that later work will be easier.
After pasting, the Decal is pressed down with a Squeegee, spatula, or Towel to expel the aqueous solution and air bubbles.
Then wait a little and you can paste it into Beauty.
View detail
Makeover
I bought it along with the rest of the Decal. The look of the image has changed with a sense of unity. View detail
To prevent scratches.
I bought this to change the Image and to prevent scratches. I like it because it changes the look of the Image. View detail
Definitely useful.
I bought it because it seemed to be convenient when I saw and used various Impressions.
One Side is a "spatula" with a Felt?
I use it for WrappingSeat, Large fine-grained Stickers and Decals.
It's cheap at just over 300 yen, but there's a big difference between having it and not having it!
There is a big difference between fighting with just your fingers and Dryer.
The Felt at the tip is exquisite.
It's like a simple version of the brushes that craftsmen use for CROSS wallpaper.
If you use a slightly stronger stroking motion, the air will be released in a good way.
I think that it is good to say that the person who puts Decal etc. is one Squeegee in a family.
View detail
It's hard to put up.
It was a little Large strange to put it because it is a place with many Curve.
It was surprisingly difficult to put it on while stretching with Dryer and needing soapy water.
Also, there was a spot where air bubbles entered even if it was fine when I put it on.
So you need to wait a little while after you put it on and see how it goes.
It is important to Check while you can reapply.
View detail
WR250R
Because Seal is thick, you can reapply it as many times as you like.
But if you don't have an area, you should finish it in two or three times.
View detail
Purchased to attach the film.
Purchased for the purpose of attaching film to automotive window glass.
Anyway, the cost is good. The plastic spatula alone costs about 500 yen, but it has both Felt and plastic sides for wiping.
It was easy to use as it was reasonably pliable in terms of performance, and the Felt surface was perfect, so I didn't need to prepare a hand towel in one hand.
It's the finish of the film, but the cat hair got caught in the mistake of the worker.
View detail
thin
It's not suitable for CourseYouth/Race use. View detail