Reviews
Due to budget constraints...let's start with Shroud.
[How is it used?
I wanted to Refresh Shroud, which was full of scuffs and scratches and was given to me by a friend, It's OEM Decal." I purchased a Graphic decal made of MDF, which is less uncomfortable to say.
It was too tight for my budget to buy a full set, so I decided to buy a quantity this time.:Pair (for Left and Right) Only the Shroud section of the
Did you receive the item as per the Image?
Decal is thinner than FACTORY EFFEX, but slightly thicker than OEMDecal, and is expected to be more durable.
MDF's Decal system was previously used for KLX125 and RimDecal, so I have a sense of security.
The product was just as per Image with just the right design, not too flashy and not too plain.
Was it difficult to install?
This kind of work... has a strong sense of tedious work rather than difficult work, and I am Quantity:Pair (for Left and Right) It took about half a day just to apply two sheets, including the adjustment of the position of the "A" and "B".
If you are familiar with the process, you may be able to do it in 30 minutes~1 hour.
How did you like it?
The decals are of high quality with no gapping of the molds.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) It is easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere without any problem even on top of scratches on the shroud, etc., and the difference between the scratches is not noticeable, making it ideal for concealing wounds. (This does not apply to deep gouging Woundetc.) 。
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
No personal.
Although the pasting process is a little Large strange when you are not used to it, the hard work will be rewarded when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. I think you can work with even more confidence if you check out the video by searching for (MDF's video is also attached around the middle of Webike's product introduction section) 。
[Availability and clarity of the Instruction Manual
Instruction Manual is included with illustrations.
But as I mentioned above, if you watch the video and then take on the challenge, you won't need the Instruction Manual.
[Notes]
Object to be pasted (Shroud and Side coverretc.). Clean and degrease the surface of the "P" before attaching it.
The rest of the work should be done as described above, referring to the video.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
I am fully aware that it is a good product, but it would be even easier to purchase if it were a little cheaper.
View detail
Fits: KAWASAKI KDX220SR, KAWASAKI KDX220R
Parenthesis is so good that I can't keep it clean anymore...
[How is it used?
I have used the Graphic decal for WR250R before, so after checking with Webike to see if they had one for KDX220, I did whatever I could to get the money to get it.
I used it on the WR250R to refresh the somewhat scratched shroud and side cover, but this time I am buying it to use on the new exterior of the KDX220SR.
Did you receive the item as per the Image?
Like the Decal I had purchased before, it was thick and durable, and the gloss and design were just as good as the Image.
Was it difficult to install?
It is not difficult, but it has a strong sense of tedious work and also requires patience, so it takes more time than you might imagine if you are not used to it.
How did you like it?
The quality &design of the decal without any gaps in the mold is very high, and we are very satisfied with the result.
The thickness of the Decal itself makes it resistant to tearing and peeling after a few falls, but I felt it was a waste of space and could no longer play in the mountains with this exterior attached. (I'm poor.) 。
When we play in the mountains, we go out with used exteriors with cheap Decal attached to them.
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off carefully before working on it.
Were there any disappointments?
No, it is just my personal opinion, but I have no complaints about both the texture and design.
The thicker fabric makes the application work a little large, but when you see the finished exterior, the hardship of the work will disappear.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Using a spray gun, spray a diluted solution of neutral detergent on the backside of the Decal and the object to be affixed, and position it while shifting it slightly to remove any air or moisture between the Decal and the parts.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. You can work with even more confidence if you check out the video by searching for
[Availability and clarity of the Instruction Manual
Was there an Instruction Manual? Well, I don't think you need Instruction Manual if you watch the video before you try.
[Notes]
Object to be pasted (Shroud and Side coverretc.). The surface of the "P" should be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
We would be very grateful if you could reissue the models that have been discontinued in the past, once we have enough orders...
View detail
I appreciate that they can be purchased individually.
[How is it used?
This product was purchased to refresh WR250R, which has more Small scratches due to playing in the mountains.
Decals for each Part are sold individually, so you can choose the Quantity:I appreciate the ease of being able to purchase Sets and RoseRose.
Was the one you received as per Image?
The thickness of Decal is a little thicker than OEM, so it is easy to apply and seems to be durable enough, which is promising.
The product was just as in Image with good design and color.
Was the installation difficult?
More than difficult. "A tedious process." Sense is strong and Sense and patience are tested.
I don't have Sense, so I had to work only with patience and it took me about an hour just to put it on the Swing Arm...
How was your experience with it?
The decal was finished to my great satisfaction, with no gapping of the mold and high quality of the decal.
The Decal itself is also durable, so there is no tearing or peeling after a few falls (although it is hard to hit obstacles because of the Swing Arm where the Decal is attached).
It has high adhesive strength, and if it is applied firmly at first, it can withstand the water pressure of high-pressure washers better than OEMDecal (it is not absolutely impossible to peel off. Please keep in mind moderate use), making it easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is strong, so if there are some scratches on the exterior, etc., it will adhere without problems (to a certain degree), so it is good for concealing Wound.
[Included Parts:were they on?
Instruction Manual for Decal and pasting is enclosed.
[Was there anything that disappointed you?
The hard work is rewarded when you see the exterior of the product after it has been applied.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
MDF has a YouTube video site that shows how to apply Decal (you can also check Webike's product introduction section), so you can work with more confidence if you watch the video before you start the process.
[Availability and clarity of the Instruction Manual
As mentioned above, an Instruction Manual on how to apply the paste is enclosed.
Well, I don't think you need Instruction Manual if you watch the video before taking on the challenge.
[Notes]
The surface of the object to be applied must be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
I think you can work smoothly if you have parts cleaner, silicon-off, etc., chemical for degreasing, spray bottle for spraying, rubber spatula for degassing and dehydration, etc.
[Opinions and requests to Manufacturer
Quantity:I would appreciate a little more savings on the purchase of Set, please.
View detail
High quality and OEM-like cohesiveness.
[How is it used?
I bought a used KLX125 exterior for mountain fun, but it was only black, and I wanted to put some decal on it, Bloody." Fire a." A Tucker." and three types of GraphicPattern, this time A Tucker." I ordered a
Was the one you received as per Image?
I purchased the product as shown in the image because I checked each Pattern on MDF's website, where there are images of the product pasted on each vehicle.
Was the installation difficult?
・・・To be honest, it is a tedious process.
1. thoroughly clean and degrease the object to be affixed.
2. Fill the empty bottle of the spray gun with diluted neutral detergent solution water and spray it evenly on the surface of the object to be pasted.
Peel off the Decal from the backing paper and place it on the object in place.
4. push out the neutral detergent water between the object and the decal with Rubber spatulaetc. after finishing correcting the position.
5. Decal that floats on the surface is lightly roasted with a dryer or the like to make it adhere to the surface.
6. When you get a good feel for 4 and 5, proceed to the next Decal work.
After the work is completed, leave Decal until the adhesion of the glue surface is stabilized, and then install it on the vehicle.
It is difficult to understand in writing, so please watch the video of the work on MDF's Site or check the videos on YouTubeetc.
I worked on it while referring to the video of the work on MDF's Site,
How was your experience with it?
The joy after the hard work of pasting is unmatched.
Especially in my case, relatively docile. A Tucker." MODEL was chosen, so after the work was completed Was this Coloring's MODEL from Manufacturer?" It is so uncomfortably integrated that it seems like a good idea.
[Included Parts:were they on?
Decal and Instruction Manual for the application work are included.
[Was there anything that disappointed you?
It is not a disappointing point, but the difficulty at the time of pasting and the cohesiveness after the completion of the project. It's harder to play in the mountains." There is a point.
Other items that would be helpful
Point and hang of installation
As I mentioned above, the best way is to check it out on video.
My personal opinion is. We'll take our time and work our way through it." is hang? I think so.
[Availability and clarity of the Instruction Manual
Instruction Manual is included in the package, but I think it is faster and easier to understand by watching the video.
[Notes]
You may want to work in a tidy indoor area, as you will want to cry if grease or dust gets on the gluing surface.
[ITEMS TO BUY TOGETHER
Rubber spatula makes draining easier, so it is a good idea to purchase one at 100-yen stores, etc.
[Opinions and requests to Manufacturer
Please continue sales for vehicles that have been discontinued as much as possible.
View detail
Parenthesis is even better than I imagined!
[How is it used?
Purchased for makeover of vehicle body.
Was the one you received as per Image?
It was thicker and more solid than I expected.
Was the installation difficult?
I think it takes time, tools, and sukill to paste it nicely.
How was your experience with it?
I am very satisfied with the "Large" product, which is much more immeasurable than I had imagined.
[Included Parts:were they on?
We recommend purchasing Squeegee separately.
View detail
Groms look great in hideous colors.
The Image is very different. Anyone can easily apply it. It is an OEM product with good quality. Grom is a fun motorcycle even if you don't drive it. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Wonderful
It finishes beautifully.
Instruction Manual is included so you can work with confidence.
View detail
Beautifully finished.
If you work carefully, you can get a beautiful finish. View detail
Curved surfaces are difficult
The place you are curving will have a bit of hang.
It is easy once you get used to it, and if you work carefully, you can get a beautiful finish.
View detail
Curved surfaces are difficult
Decal is easy to apply, but Fork Guard has a subtle curved surface that makes it difficult.
I managed to get it clean by repeatedly warming it up with a heat gun while removing wrinkles little by little.
The product is of very high quality, and after installation it creates a good atmosphere for Parenthesis.
View detail
easy to stick to
The instruction manual is included in the package, so if you follow the instructions, you will not make any mistakes.
It is a good quality Decal, so it goes on beautifully and lasts a long time.
View detail
High quality.
We are reupholstering the old ones because they are out of date.
It is very easy to tension and thick, making it very durable.
It can be easily adapted to curved surfaces by heating it with a heat gun.
A detailed Instruction Manual is included in the package.
If you follow the instruction manual, you will not fail.
View detail
Makeover
I bought it along with the rest of the Decal. The look of the image has changed with a sense of unity. View detail
To prevent scratches.
I bought this to change the Image and to prevent scratches. I like it because it changes the look of the Image. View detail
Definitely useful.
I bought it because it seemed to be convenient when I saw and used various Impressions.
One Side is a "spatula" with a Felt?
I use it for WrappingSeat, Large fine-grained Stickers and Decals.
It's cheap at just over 300 yen, but there's a big difference between having it and not having it!
There is a big difference between fighting with just your fingers and Dryer.
The Felt at the tip is exquisite.
It's like a simple version of the brushes that craftsmen use for CROSS wallpaper.
If you use a slightly stronger stroking motion, the air will be released in a good way.
I think that it is good to say that the person who puts Decal etc. is one Squeegee in a family.
View detail
WR250R
Because Seal is thick, you can reapply it as many times as you like.
But if you don't have an area, you should finish it in two or three times.
View detail
A little wrinkle remained but OK
I bought the Front fender last time and it took time to hold the pointed point so long that I got sticky
I did not have a pointed point this time so it worked well Arm's curvature was Large Yeah Dryer use also did not work well with Wrinkle but because it is cheap it will be purchased and replaced when it peels off.
I like Design a lot..
Adhesion for Rear Fender of FX was strong, but the pointed point was peeled again After repairing with low adhesion Bond, please be careful and paste the thin pointed portion before use.
View detail
Used for pasting Decal
I used it to paste Motocrosser Decal.
It was easy and beautiful finish like a lie that I was doing my best with my fingers.
Size is also exactly good, comfortable to use was also good.
View detail
Conspicuous thing, Konouenashi
I ordered at the same time as purchasing a new car. If you ask Manufacturer you can change it by Brass 2000 yen per color. I changed the color of Main to Red (H1) To Yellow (D4) We have changed to. Since the way of pasting is posted on the site of MDF, if you study well, you can somehow even an amateur.
However, use of Squeegee is mandatory. It has been already over a year and a half, but there is no Large peeling. There was something a little horny, but glue (G2) There is no problem if you carefully repair with. Anyway, because it is unprecedented coloring, it stands out, and I can often call out Honda's new color.
View detail
Fits: HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX150
I was satisfied that the installation was Large strange.
I installed it watching animation of installation Instruction Manual and Manufacturer. It took quite a lot of work, and on the way, I almost got frustrated but wearing all Parts. On the day I pasted it seemed like there was no air in, but the next day I saw air in some places. I think that it is persistent work.
The results are satisfied.
View detail