Reviews
Easy installation
When removing the OEMScreen, hold the Screen and carefully remove it when removing the last one
When installing the bracket, it is easier to temporarily assemble the Multi Bar, but since the holes for installing the Multi Bar are long holes, it is better to tighten the bracket by hand to some extent to prevent scratches on the bracket.
The bracket is not completely fixed, but slightly loosened for installation.
Use top and middle holes when mounting Shield at 5cmUp
The Bracket can be mounted straight by temporarily fixing the holes on the underside of the Shield.
All that remains is to tighten the Bolt on the OEMScreen. The Bolt on the upper side must be tightened with the nut in place or the paint on the Bracket will be damaged.
Even a 5cm rise in height is enough to provide wind protection.
The Cap Bolt Cover can also be personalized by choosing a color that is sold separately (although it is more expensive...)
View detail
For mounting of Smartphone Mount
I bought this for mounting my phone mount, it is Exclusive Design so it is easy to install and has a high quality feel. I am glad I was able to place the phone at eye level, and it would be even better if the Bracket was lightweight! View detail
Installation Easy
It is easy to install.
However, the phone mount bar vibrates slightly while driving, so the phone must be securely attached.
View detail
Fits: HONDA CB650R
As per Instruction Manual
If you follow the instruction manual, even a novice mechanic should be able to install it. View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SRX250, SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1200
Little closer to headlight
I fixed in honda hornet 250.once fixed to headlight mount the palstic visor will too closer to headlight ring.but I'm satisfied about product. Made with good thick iron plate.once tied bolt, it will solidly will hold to mount. View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SRX250, SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1200
☆☆☆☆
Installation and accuracy:it's an Exclusive Design, so it comes on nicely. Good.
Quality and texture:It's of the Gold genus, so it's not cheap. Paint does not come off.
Rectification:There is no rectification effect in the bracket itself (Lol) 。
Shape:Large size, which is less noticeable.
Cost performance:I think it's fair, but Visor is more expensive. However, Visor is more expensive.
Overall:I'm glad I bought it.
View detail
Fits: HONDA Monkey 125
"Exclusive Bracket. So Fit is a given. Yes
Cars that can't travel at high speeds don't need Screens. But I thought that the abdomen Chill. I'm curious about the ….
even if only a little "Ease the chill. I'd like to. I don't want to influence Styling as much as possible. thought "[Color] Aero Visor in Clear color. You have selected the
as planned It's inconspicuous and keeps the abdomen cool. It was able to do things … but when you enter the high RPM range during acceleration, it vibrates in small increments. Vuh-uh & hellip; and a resonant sound.
Shift Up Indicator. I'm sure you're right. "Force Optionw I would recommend this dish to anyone other than those who don't like
View detail
Fits: KAWASAKI W800, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800
W800street is now attached.
19 - New Modelw also came with no problem without any interference.
The point is to invert the Rubber Spacer according to the Instruction Manual. If it is not reversed, the screw hole and the width of the screw hole on the Visor side do not match. It is a simple screw tightening work.
View detail
Fits: KAWASAKI Z900RS
Pounding best!
DAYTONA's vehicle type Exclusive Bracket has Z 900 RS, I bought it immediately. There is nothing difficult if you follow the instructions as described, "Instruction Manual" It may be a special item including also. To prevent unnecessary scratches and breakage, open the light case and remove the Screws until you can move the Lens unit. It is unfortunate that there is no anti-rotation mechanism, that you hit Meter case Sponge is pretty. View detail
Exactly because it is exclusive for the car model
CB 1000 Rexclusive Bracket for installing DAYTONA Aero Visor, Blast Barrier, Blast Barrier X.
There are only exclusive items and excellent mounting accuracy.
I attached the Universal Product's Blast Barrier X but it fits perfectly just like ordered.
However, it is painful to tighten if the Hexagonal Wrench for installation is not long.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB250R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
You can experience the effect
It is attached to CB 125R. I expect the rectification effect, but it was as expected. Acceleration and the highest speed are obviously rising not only with the bodily sensation but also with Meter reading. Also on the uphill you could not go up unless it was 3rd gear, the 4th gear now comes in. SmallEngine Displacement Volume In the case of a car, I think that it is more effective than inserting a Full Exhaust System.
However, although I chose this item in few choices, I think whether I chose it if there is a product that thought about Aero effect a little more if it is Large.
View detail
Fits: HONDA CB1100, HONDA CB1100, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT1200, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400
I would like to ask you to make products that are not ashamed of the name of DAYTONA
【What made you decide the purchase?】 : For Shield and Set use
【How was it actually used?】 : It was better if Shield angle adjustment was possible
【Was it difficult to install? (Hard parts case)】 : Easy!
【Please tell me the point of installation and hang (in the case of Hard parts)】 : Removal of BALI and repainting makes it hard to scratch the shield)
[Is there anything I was disappointed about?] : BALI after die cutting is left intact. (There is a risk of injury at installation)
【Hope for Manufacturer - Please let me know if you have any improvement points] : BALI removal of product → paint
【Have you compared items?】 : Road Comet (CHIC DESIGN)
View detail