Reviews
Vehicle Inspection.
To make Japanese Vehicle Inspection Correspondence when changing to outside Screen.
If there is a certain amount of bending, it stays in place without using Clip.
I thought we could get two cars, depending on the type of car.
View detail
For Japanese Vehicle Inspection Correspondence?
I had heard from my father, a Motorcycle shop owner, that if the Edge of the Screen is on the car, it will not pass inspection. [Color] I purchased Smoke and it came on Exactly with Zero gravity products by simply adjusting the length. View detail
Consumables.
It is used for the sameManufacturer'sScreen.
I installed it for a car inspection and have been using it ever since because it looked surprisingly luxurious.
I bought it because after about 3 years, the Yellow tarnish became noticeable.
The lacing braid end bracket allows for a secure fit and has never come off at high speeds.
It is long enough to be used one more time, so I will keep it well.
View detail
for Race.
Purchased to meet Race regulations.
It can be cut to the required length with scissors for installation.
It may be roughly twice as long.
View detail
For Z900RS
I put it on so that it would not interfere with the vehicle inspection.
No particular problem with MRA since it is MRA's Screen.
The grips were quite tight, and the fit was Large strange.
The length in the photo is 40 cm use.
Clips are securely fastened without being attached.
View detail
Japanese Vehicle Inspection Correspondence
I bought it because I was using MRA's Screen and didn't have a mall.
Without it, the vehicle will not pass inspection.
I use clips at both ends without using any adhesives, and so far they have not come off.
View detail
perfectly (suited)
It was perfect without cutting into front cowl. View detail
MRA would be Included Parts:.
[How is it used?
I bought a High Protection Screen from Secdem and lo and behold! It doesn't come with the edge molding! MRA comes standard with Screen's edge molding, but Secdem's High Protection Screen, which costs 10,000 yen more than MRATouring screen, does not come with edge molding! So I had to buy MRA's Universal Edging Mould separately (tears).
Was the one you received as per Image?
Clear or. [Color] I was not sure whether to use Smoke or Smoke, but I wanted the border line to be clear enough to be able to see the hadrill. [Color] I chose Smoke and it was the right choice.
Was the installation difficult?
At first glance, it looks easy, but it was tedious to handle the ends of the braid carefully or it would not look good. The work took about an hour.
How was your experience with it?
It doesn't seem to have much to do with aerodynamics, but it does look different without the molding! Besides, if the Screen doesn't have a molding, it may be dropped at the car inspection (because the corners of the Screen are sharp and dangerous), so this is a perfect solution for the car inspection!
[Included Parts:were they on?
Two Clips are included to secure both ends of the braid.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:The length of the braid is 1m, so it needs to be cut to fit the Screen, but if it is cut too short, it will be irreversible. Gradually, we trimmed it down and adjusted it.
View detail
Mall Clips
If you do not pinch the braid clip very tightly, the clip will come off when you remove the motorcycle cover or while riding.
I only need Clip this time, so I bought it. 。
There was no need for a mall.
It would be great if you could only sell Clip.
View detail
To make it a Japanese Vehicle Inspection Correspondence!
I installed the windshield of the Other Brand Product to make it a Japanese Vehicle Inspection Correspondence!
It passed the inspection without any problems.
View detail
Cb1100ex
I bought the Cb1100ex Daytona Cozy k0 seat together. Since the motorcycle is silver, the whole is decorated with chrome&stainless steel. Daytona silver molding View detail
Easy to use
You can buy quality Windscreen Mole at affordable prices.
Quantity:I'm giving it 4 stars because I feel that the Sticker in the Set might have looked better in the previous version.
View detail
Vehicle Inspection Measures
MRAScreen is installed, but the bracket of the braid fixation is lost (often). I had to replace the braid because it was deteriorated. It is very nice that you can sell it as a lacing braid set. View detail
Affordable
It is easy to install on Screen at an affordable price.
Recommendation for those who are concerned about the outside of the Screen.
View detail
Fit for curvature
The ZX-25R A-Tech Screen was left uncut, so I used it to make it look better.
I was worried about the fit because of the curved lines, but the Large was sturdy.
The clip that stops the end is Chromate plating, so if you don't rustproof it once in a while, the white rust will float.
It is better to crush it lightly with Pliers after fitting because the crimp is loose.
View detail
Mounted on external Screen
I installed it on the Screen of Other Brand Product. The material is relatively soft and durable and I was able to install it without difficulty. The length is also enough, and about half of it was left over, but I keep it for spare parts. View detail
On the edge of the sharp Screen!
I bought this because the edges of the Screen can be sharp.
Recommended for those who cut Screen.
It is easy to install and comes with a gold clasp.
View detail
It looks better now
The braid was replaced as it got old and hardened and the color became dull. The look is still beautiful and two mall clips are also available on Quantity:It comes in a set and is easy to replace. View detail
Purchased for inspection.
Purchased and installed for the inspection, but the color is wrong. [Color] Because it is clear and inconspicuous, it is installed as it is after inspection.
It's probably a good idea to have it on in case of an accident and you lose the end of your neck. (Lol)
View detail
It's a little bit of a surprise
I bought it directly 3 years ago without going through Webike (sorry)
I used it in conjunction with the new Screen
Softer, thicker and easier to handle than OEM, but as others have commented It's a bit distorted if you're not careful
Because it is rubber, I will continue to use it as a consumable item and try my best to wind it well It is
View detail